

zł35.82 tax excl.
UART-Ethernet converter for bi-directional communication between devices equipped with UART TTL ports and Ethernet. It is visible in the system as a virtual COM port and configured via a web page or via AT commands. USR-K5
The UART-Ethernet converter is a module that allows bi-directional communication between devices equipped with UART TTL ports and an Ethernet network. It supports four modes of operation: TCP Client, TCP Server, UDP Client and UDP Server, allowing it to be adapted to different applications.
The converter is visible in the system as a virtual COM port, making it easy to integrate into existing software. It is dedicated to industrial applications - this means that it is resistant to conditions such as vibration, high temperature or humidity. It allows user-defined packages, which allows it to be tailored to the requirements of specific applications. Configuration of the device is possible both via the website and via AT commands.
The device is equipped with a built-in hardware watchdog to control the operation of the device and respond to errors. The converter requires a 3.3 V power supply and has very small dimensions (35 x 19.39 x 18.25 mm) and low weight, making it easy to install in hard-to-reach places.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Ethernet patch cord UTP 5E, 2 m long. Red color, with RJ45 connectors. Lanberg Z22990
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0200-BK
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0200-B
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0200-Y
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0300-S
Ethernet module with WIZ5500 chip and RJ45 connector. It allows you to connect the Feather series boards to a wired network. Adafruit 3201
Ethernet interface controller module based on the ENC28J60 system. It communicates via the SPI interface. Waveshare ENC28J60 Ethernet Board
No product available!
The USR-IO0440 is an additional input/output module specifically designed to work with USR-M100 and USR-M300 modules. This module allows the system to be expanded with additional analog and digital ports, providing even greater flexibility in managing and controlling devices in industrial applications. With its robust construction and ease of integration, the USR-IO0440 is an excellent complement to the USR-M100 and USR-M300 gateways, enhancing their monitoring and control capabilities. USR-IO0440
UART-Ethernet converter that provides easy communication between UART TTL serial interface and RJ45 Ethernet. Configured via web page or AT commands. USR-TCP232-T2
No product available!
2-channel converter that provides easy communication between the UART TTL serial interface and RJ45 Ethernet. Waveshare 2-CH UART TO ETH
The USB to 2.5G Ethernet converter is a compact and efficient tool that extends network functionality to devices lacking an RJ45 interface. With broad system compatibility and driverless operation, it is well-suited for mobile setups, single-board computers, embedded systems, and upgrading older hardware to higher network speeds.
Gigabit Ethernet expansion module with RTL8211E-VB chip (integrated Realtek Ethernet transceiver). It complies with 10BASE-T, 100BASE-TX and 1000Base-T IEEE 802.3 standards. Numato Lab ETHEXPGB001
No product available!
Ethernet network module with W5500 chip and PoE (Power over Ethernet) function. It communicates via the SPI interface, it has a built-in TCP/IP stack. DFRobot DFR0850
Expansion board based on the Wiznet W5200 Ethernet system. It allows you to easily connect Arduino to an Ethernet network. DFRobot DFR0125
Ethernet module dedicated to Coral Dev Board Micro. It supports power over Ethernet (PoE) technology and connects to the base board via B2B connectors. Coral G650-07975-01
Miniature Ethernet network module with W5500 chip. It has compact dimensions, so it can be used as an element of another device
UART - Ethernet converter enabling two-way communication between devices equipped with UART TTL ports and the Ethernet network. It is visible in the system as a virtual COM port and configured via the website. USR-K6
UART-Ethernet converter for bi-directional communication between devices equipped with UART TTL ports and Ethernet. It is visible in the system as a virtual COM port and configured via a web page or via AT commands. USR-K5