USR-M300-ETH – Industrial IoT Edge Gateway with Ethernet interface, expandable I/O, Modbus, MQTT, VPN
ID: 1200615
zł499.69
Tax included
zł406.25 tax excl.
USR-M300-ETH is a versatile industrial IoT gateway with advanced edge computing capabilities, I/O support, and wide compatibility with network and cloud protocols. Ideal for remote monitoring, data acquisition, and automation in industrial, energy, and infrastructure applications.
Description
USR-M300-ETH is an industrial IoT Edge Gateway with data acquisition, local processing (edge computing), protocol conversion, I/O support, and cloud data transmission. The device supports Modbus RTU/TCP, MQTT, and SNMP conversion, and offers multiple communication interfaces including 2 serial ports (RS232/RS485), 2 Ethernet ports (LAN/WAN), 2 digital inputs (DI), 2 digital outputs (DO - relay), and 2 analog inputs (AI - 4–20 mA). Thanks to its modular design, it can be easily expanded with additional I/O modules.
The device runs on a Linux system with a dual-core 1.2 GHz processor and supports concurrent data collection from up to 2000 data points. It supports various modes of TCP/UDP/HTTP/Websocket operation and the Node-RED graphical programming environment. Designed for operation in harsh industrial environments with a temperature range from -40°C to +85°C and power supply of 9–36 V DC. The ABS enclosure with IP30 protection allows for DIN rail or wall mounting.
Properties
- Processor: dual-core, 1.2 GHz, Linux
- Serial ports: 2 × (RS232/RS485, RS485)
- Ethernet ports: 1 × WAN/LAN, 1 × LAN (10/100 Mbps)
- I/O: 2 × DI, 2 × DO (relay), 2 × AI (4–20 mA)
- Power supply: DC 9–36 V
- Serial transmission rate: 600–230400 bps
- Supported protocols: Modbus RTU/TCP, MQTT, TCP/IP, HTTP, SNMP, VPN (PPTP/L2TP/OpenVPN), NTP
- Security: SSL/TLS, firewall, routing, static IP
- DI inputs: 0–2 V (low), 9–36 V (high)
- DO outputs: up to 10 A/28 V DC and 5 A/250 V AC
- Enclosure: ABS, IP30 protection rating
- Mounting: DIN rail or wall mounting
- Dimensions: 79.6 × 58 × 110 mm
- Operating temperature: –25°C to +75°C
- Certifications: CE, FCC, RoHS
1200615
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Available
Universal module supervised by the website, which can control both DC circuits as well as powered from 230 V mains. The states of digital inputs, relays and control buttons are presented on the website. AVTMOD05
Regular pricezł403.19zł352.80
24h
Available quantity: 1
Available
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega
zł129.00
3 weeks
No product available!
The module allows the existence of devices with BLE in networks with the Ethernet protocol, has a BT2.1 receiver
zł226.32
24h
Available quantity: 1
Available
Ethernet module with WIZ5500 chip and RJ45 connector. It allows you to connect the Feather series boards to a wired network. Adafruit 3201
zł106.85
24h
Available quantity: 4
Available
The transceiver module of the DP83848 Ethernet interface
zł45.74
24h
Available quantity: 2
Available
Ethernet extension for Arduino based on the Wiznet W5100S chip, enabling a microcontroller to connect to a LAN network via an RJ45 connector. The module supports a hardware TCP/IP stack, up to 4 simultaneous network connections, and includes a microSD card slot, communicating with Arduino through the SPI interface. DFRobot DFR0125
zł64.92
24h
Available quantity: 3
Available
Carrier board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a small router. DFRobot DFR0767
zł253.27
24h
Available quantity: 5
Available
USB 3.2 Gen1 to Gigabit Ethernet converter based on the efficient Realtek RTL8153 controller. It is compatible with Win7 / 8 / 8.1 / 10, Mac, Linux and Android systems. Waveshare USB 3.2 Gen1 TO Gigabit ETH
zł64.10
4 weeks
No product available!
Miniature Ethernet network module with W5500 chip. It has compact dimensions, so it can be used as an element of another device
zł30.90
4 weeks
No product available!
Ethernet network module with W5500 chip. Supports up to 8 independent sockets simultaneously
zł17.54
24h
Available quantity: 103
Available
Ethernet network module with W5500 chip and PoE (Power over Ethernet) function. It communicates via the SPI interface, it has a built-in TCP/IP stack. DFRobot DFR0850
zł132.67
24h
Available quantity: 1
Available
2-channel converter that provides easy communication between the UART TTL serial interface and RJ45 Ethernet. Waveshare 2-CH UART TO ETH
zł44.24
4 weeks
No product available!
Ethernet network module with W5100S chip dedicated to Raspberry Pi Pico. It communicates via the SPI interface and works with 3.3 V and 5 V systems. WIZnet-Ethernet-HAT
zł28.06
24h
Available quantity: 23
Available
Ethernet MQTT communication module designed for M5Stack sets. It communicates via the UART interface using AT commands. M5Stack U129
zł179.00
24h
Available quantity: 2
Available
Expansion board based on the Wiznet W5200 Ethernet chip. It allows you to easily connect the Arduino to the Ethernet network. DFRobot DFR0272
zł95.69
24h
Available quantity: 2
Available
USR-M300-ETH is a versatile industrial IoT gateway with advanced edge computing capabilities, I/O support, and wide compatibility with network and cloud protocols. Ideal for remote monitoring, data acquisition, and automation in industrial, energy, and infrastructure applications.