USR-TCP232-S2 - UART - Ethernet converter module
ID: 1184212
5906623438853
zł36.20
Tax included
zł29.43 tax excl.
UART - Ethernet converter enabling two-way communication between devices equipped with UART TTL ports and the Ethernet network. It is visible in the system as a virtual COM port and configured via the website or using AT commands. USR-TCP232-S2
Description
The UART - Ethernet converter is a module that enables two-way communication between devices equipped with UART TTL ports and the Ethernet network. It supports working modes: TCP Client, TCP Server, UDP Client and UDP Server as well as HTTPD Client, which allows it to be adapted to various applications.
The converter uses a built-in microcontroller with ARM Cortex-M4 core. It has a derived UART TTL interface that can work simultaneously. It supports support for all major network protocols, including IP, TCP, UDP, DHCP, DNS, HTTPS, ARP, ICMP and Web socket. It is visible in the system as a virtual COM port, which facilitates its integration with existing software. Configuration of the device is possible both via the website and using AT commands. The converter requires 3.3 V power supply and has very small dimensions, which facilitates its installation in hard-to-reach places.
Features
- Microcontroller with ARM Cortex-M0
- Bidirectional UART TTL communication with Ethernet
- UART TTL port
- UART baud rate: 600 bps to 460.8 kbps
- Supports working modes: TCP Client, TCP Server, UDP Client, UDP Server, HTTPD Client
- Visible in the system as a virtual COM port
- It can be used for communication between the microcontroller and the server via Ethernet
- Auto-MDI/MDIX, RJ45 port with 10/100Mbps
- Configuration via web page and AT commands
- Support for Modbus RTU and Modbus TCP
- Protocols: IP, TCP, UDP, DHCP, DNS, HTTPS, ARP, ICMP, Web socket
- Unique MAC address
- Electromagnetic isolation 2kV
- Small dimensions and weight
- Power: 3.3V
- Dimensions: 33 x 20.3mm
1184212
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Converter that provides easy communication between RS232 and RS485 interfaces and RJ45 Ethernet. Configurable via web page or AT commands. USR-TCP232-306
zł90.71
24h
Available quantity: 19
Available
UART-Ethernet converter that provides easy communication between UART TTL serial interface and RJ45 Ethernet. Configured via web page or AT commands. USR-TCP232-T2
zł47.07
Delivery date unknown
No product available!
A 2xUART - Ethernet converter for bi-directional communication between devices equipped with TTL UART ports and Ethernet. It is visible in the system as a virtual COM port and configured via a web page or via AT commands. USR-TCP232-E2
zł65.10
Delivery date unknown
No product available!
Other products in the same category (16)
Ethernet board with mini SD card slot based on W5100 controller.
zł35.24
4 weeks
No product available!
Development kit for programmable Ethernet modules EM1202, EM500 and GA1000, RoHS
zł38.90
24h
Available quantity: 4
Available
Available
BASIC-programmable Ethernet Module, Tibbo Technology, RoHS
zł221.40
24h
Available quantity: 3
Available
Available
Available
Universal module supervised by the website, which can control both DC circuits as well as powered from 230 V mains. The states of digital inputs, relays and control buttons are presented on the website. AVTMOD05
zł403.19
24h
Available quantity: 1
Available
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega
zł129.00
3 weeks
No product available!
The module allows the existence of devices with BLE in networks with the Ethernet protocol, has a BT2.1 receiver
zł226.32
24h
Available quantity: 1
Available
Ethernet module with WIZ5500 chip and RJ45 connector. It allows you to connect the Feather series boards to a wired network. Adafruit 3201
zł106.85
24h
Available quantity: 4
Available
The transceiver module of the DP83848 Ethernet interface
zł45.74
24h
Available quantity: 2
Available
Ethernet extension for Arduino based on the Wiznet W5100S chip, enabling a microcontroller to connect to a LAN network via an RJ45 connector. The module supports a hardware TCP/IP stack, up to 4 simultaneous network connections, and includes a microSD card slot, communicating with Arduino through the SPI interface. DFRobot DFR0125
zł63.78
24h
Available quantity: 1
Available
Carrier board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a small router. DFRobot DFR0767
zł253.27
24h
Available quantity: 6
Available
USB 3.2 Gen1 to Gigabit Ethernet converter based on the efficient Realtek RTL8153 controller. It is compatible with Win7 / 8 / 8.1 / 10, Mac, Linux and Android systems. Waveshare USB 3.2 Gen1 TO Gigabit ETH
zł64.10
24h
Available quantity: 2
Available
Miniature Ethernet network module with W5500 chip. It has compact dimensions, so it can be used as an element of another device
zł30.90
4 weeks
No product available!
Ethernet network module with W5500 chip. Supports up to 8 independent sockets simultaneously
zł17.54
4 weeks
No product available!
UART - Ethernet converter enabling two-way communication between devices equipped with UART TTL ports and the Ethernet network. It is visible in the system as a virtual COM port and configured via the website or using AT commands. USR-TCP232-S2