- New
UTC-T01 Industrial USB-to-CAN - USB-CAN converter - Seeed Studio 100030768
ID: 1204621
zł94.98
Tax included
zł77.22 tax excl.
A converter enabling communication between a computer and a CAN 2.0A bus at transmission speeds from 5 kbps to 1 Mbps. Based on an STM32 microcontroller, the device offers two operating modes: PCAN, compatible with diagnostic tools, and Transparent Mode, enabling communication via a virtual serial port. The adapter is compatible with Windows, Linux, and Android systems, as well as embedded platforms such as Raspberry Pi. Seeed Studio 100030768
Description
UTC-T01 Industrial USB-to-CAN Adapter is a compact device that enables communication between a computer and a CAN bus. It is designed for embedded systems engineers, FPGA developers, and specialists analyzing and diagnosing CAN networks. Thanks to the STM32 microcontroller, it provides stable data transmission in the range from 5 kbps to 1 Mbps. The adapter supports the CAN 2.0A standard and works with many industrial systems, vehicles, and IoT devices.
The device offers two operating modes: PCAN and Transparent Mode. In PCAN mode it works like a classic PCAN-USB adapter and is compatible with diagnostic tools such as PCAN-View and TS-Master. It is also possible to upload open-source firmware such as SLCAN or Candlelight. Transparent Mode allows communication with the CAN bus via a virtual serial port without installing additional drivers.
The adapter works with Windows, Linux, and Android systems, as well as embedded platforms such as Raspberry Pi. A DIP switch allows configuration of the 120 Ω termination resistor, 0 Ω resistance, and BOOT mode for firmware updates. LED indicators show power and transmission activity. The device also supports features such as cyclic transmission, multi-frame sending, and CAN identifier filtering, which makes testing and debugging systems easier.
Features
- Industrial USB to CAN bus adapter
- Microcontroller: STM32
- Supported bus standard: CAN 2.0A
- CAN transmission speed range: 5 kbps to 1 Mbps
- Operating modes:
- PCAN Mode (default)
- Transparent Mode (virtual serial port)
- Compatibility with tools: PCAN-View, PCAN-Explorer, TS-Master
- Support for open-source firmware: SLCAN, Candlelight
- Computer communication interface: USB
- Transparent mode enabling serial communication without driver installation
- Supported operating systems:
- Windows XP / 7 / 8 / 10 / 11
- Linux (e.g., Ubuntu, Raspberry Pi OS)
- Android
- DIP switch for hardware configuration
- Option to enable 120 Ω termination resistor
- Option to switch resistance to 0 Ω
- BOOT mode for firmware updates
- Status LEDs:
- PWR – power
- TXD – data transmission
- RXD – data reception
- Online firmware update support
- Diagnostic features: multi-frame sending, cyclic transmission, CAN identifier filtering
- Dimensions: 73.8 × 23.6 × 14.5 mm
1204621
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB 3.0 type A plug and socket, cable length 1.8m. LANBERG CA-US3E-10CC-0018-B
zł11.22
24h
Available quantity: 4
Available
High-quality black USB 2.0 extension cable. Lanberg CA-USBE-10CC-0018-BK
zł4.19
24h
Available quantity: 9
Available
Cable with plug and socket USB 2.0 type. A, cable length 0.5 m. Equipped with a switch
zł22.90
24h
Available quantity: 3
Available
Other products in the same category (16)
UART-CAN converter module based on the TJA1050 transceiver system. It allows for communication, for example, of a microcontroller via the CAN bus
zł4.24
4 weeks
No product available!
The CAN transmitter and receiver module is intended for M5Stack sets. It is based on an isolated CA-IS3050G transceiver system, which can provide differential data reception and transmission. M5Stack U085
zł65.57
24h
Available quantity: 3
Available
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
zł100.76
4 weeks
No product available!
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł39.90
24h
Available quantity: 82
Available
TTL/CAN-USB converter dedicated to distance sensors TF03, TF02 and TFmini with TTL/CAN interface. Comes with a miniUSB cable. Benewake TTL/CAN to USB converter
zł199.90
4 weeks
No product available!
I2C-CAN converter using the MCP2551 and MCP2515 systems and the ATmega168PA microcontroller. The module uses the I2C bus and the Grove connector for communication. Seeed Studio 113020111
zł97.10
24h
Available quantity: 4
Available
USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A
zł87.50
24h
Available quantity: 23
Available
CAN transceiver module based on the TJA1051T/3 chip. Allows you to connect a board with native CAN support (the transceiver will convert 3V signals into differential CAN signals) to a network of devices. Adafruit 5708
zł20.90
24h
Available quantity: 4
Available
Expansion module designed for Raspberry Pi or BIGTREETECH CB1. It allows you to add a CAN interface and use minicomputers for control in industrial or automotive applications. BIGTREETECH IO2CAN V1.0
zł49.90
24h
Available quantity: 5
Available
Communication module with CAN-UART converter and USB 1.0 interface. It supports CAN 2.0 protocol and supports SLCAN. It is operated using AT commands. DFRobot TEL0150
zł97.51
4 weeks
No product available!
Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN
zł42.72
24h
Available quantity: 2
Available
KAmod CAN-TXRX is a CAN bus transceiver with the MCP2542FD system, compatible with the CAN 2.0 and CAN FD standards, enabling sending and reading data with the serial interface voltage level adjustable in the range of 1.7...5 V, equipped with protections and LEDs signaling action
zł37.90
24h
Available quantity: 51
Available
The module is based on the GD32E103 microcontroller, supporting CAN FD at up to 5 Mbps, making it ideal for automotive and automation applications. With AT command support, Grove connector and compatibility with XIAO RP2040 boards, the module offers easy integration in IoT projects such as monitoring or automation. Seeed Studio 114992978
zł34.23
24h
Available quantity: 3
Available
CANable V2.0 PRO is a USB-C to CAN adapter with galvanic isolation. It supports CAN 2.0 and CAN FD, ensuring reliable communication and broad compatibility. MKS CANable V2.0 PRO
zł128.35
4 weeks
No product available!
Expansion board for XIAO, enabling easy CAN Bus communication by integrating MCP2515 and SN65HVD230. Ideal for applications in vehicles, industrial control systems and robotics, it provides reliable data exchange and easy integration into the XIAO ecosystem. Seeed Studio 105100001
zł49.43
24h
Available quantity: 5
Available
The CAN interface module KAmod with the SN65HVD230 chip enables direct communication with the CAN bus in systems powered by 3.3 V. Compatible with PCA82C250 chips, equipped with ESD protection and functions eliminating interference, it will perform well in industrial, automotive, and IoT projects.
zł16.90
24h
Available quantity: 71
Available
A converter enabling communication between a computer and a CAN 2.0A bus at transmission speeds from 5 kbps to 1 Mbps. Based on an STM32 microcontroller, the device offers two operating modes: PCAN, compatible with diagnostic tools, and Transparent Mode, enabling communication via a virtual serial port. The adapter is compatible with Windows, Linux, and Android systems, as well as embedded platforms such as Raspberry Pi. Seeed Studio 100030768