.png)
OBD-II CAN-BUS Development Kit
ID: 583191
5906623486519
zł116.36
Tax included
zł94.60 tax excl.
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
Description
OBD-II CAN-BUS Development Kit is a set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. CAN Bus module can be connected to any evaluation kit, incl. Arduino, Raspberry Pi or Beaglebone using the UART interface. The kit includes the Arduino library, which makes it much easier to start working with the kit, as well as documentation and a sample project. OBD-II CAN-BUS Development Kit is an excellent tool for any hobbyist who would like to learn about the operation of the OBD II system.
OBD-II (short for On-Board Diagnostics, Second Generation) is a built-in vehicle self-diagnosis system. It allows you to accurately identify your vehicle's problem by connecting a 16-pin OBD-II reader and reading OBD-II codes, known as Diagnostic Trouble Codes (DTCs), which are helpful in understanding problems without having to completely disassemble the vehicle.
Features
- Fast communication up to 1 Mb/s
- Easy setup
- Support for multiple platforms, incl. Arduino, Raspberry Pi, Beaglebone etc.
- LED for power, status, transmit and receive
- The connector is compatible with the ODB II standard
- UART interface for communication with the microcontroller
- Dimensions: 110 x 83 x 43 mm
- Weight: 71.5 g
Kit contains
- CAN Bus module
- OBD II connector
- Screwdriver
- CAN Bus cable
- Grove cable
583191
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł109.90
Delivery date unknown
No product available!
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 18
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł339.54
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł499.00
24h
Available quantity: 144
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 146
Available
Other products in the same category (16)
Resistive soil moisture sensor. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020008
zł16.72
24h
Available quantity: 3
Available
A small module with a temperature sensor (thermistor). As the temperature changes, the resistance of the thermistor changes, which allows the temperature to be measured in the range from -40 to 125 ° C with an accuracy of 1.5 ° C. The module has a connector in accordance with the Grove standard. Seeed studio 101020015
zł13.76
24h
Available quantity: 2
Available
Module with a sound sensor based on an electret microphone and LM358 amplifier. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020023
zł29.74
24h
Available quantity: 3
Available
The module with a TA12-200 current sensor with a measuring range of alternating current up to 5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020027
zł41.34
24h
Available quantity: 1
Available
Module with a slide potentiometer. Depending on the position of the slider, the resistance value (maximum resistance 10kΩ) changes, which translates into the voltage value at the analog output of the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020036
zł30.37
24h
Available quantity: 1
Available
Module with rotary potentiometer. The connector in this module has been moved to the other side of the PCB, which makes it easier to assemble and use this module. The module has a connector in accordance with the Grove standard. Seeed studio 101020048
zł17.50
24h
Available quantity: 1
Available
A volume sensor designed to detect loud ambient sounds. The module uses a microphone and LM2904 amplifier. The output value (analog signal) depends on the volume of the detected sound. In order to eliminate interference, the microphone signal is subjected to double filtering. Seeed studio 101020063
zł33.01
24h
Available quantity: 2
Available
Module with tact switch button. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020003
zł8.19
24h
Available quantity: 2
Available
Module with SPDT switch. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020004
zł15.68
24h
Available quantity: 4
Available
Module allowing collision / vibration detection (based on the MVS0608.02 system). Permitted to detect collisions irrespective of direction, provides high stability and is highly sensitive. The module has a connector in accordance with the Grove standard. Seeed studio 101020005
zł50.49
24h
Available quantity: 2
Available
Module with a humidity sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020018
zł13.95
24h
Available quantity: 2
Available
A small module with a PIR motion sensor. It allows detecting movement within a maximum range of 6 meters (default up to 3 meters). The measuring angle is 120 degrees. The module has a connector in accordance with the Grove standard. Seeed Studio 101020020
zł42.83
24h
Available quantity: 2
Available
The module with the tilt sensor, the sensor output is a digital signal. The module has a connector in accordance with the Grove standard. Seeed studio 101020025
zł17.37
24h
Available quantity: 2
Available
The touch sensor module (touch button) can be used as a replacement for traditional mechanical buttons. It operates based on the TTP223-B system, which measures the capacity of the metal field on the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020037
zł21.35
24h
Available quantity: 2
Available
Module with a magnetic sensor based on the CT10 reed switch. CT10 is a unipolar reed switch, normally open. The sensor reacts to the action of an electromagnet, permanent magnet or a combination thereof. The module has a connector in accordance with the Grove standard. Seeedstudio 101020038
zł19.83
4 weeks
No product available!
The Hall sensor module allows magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Grove standard. Seeed studio 101020046
zł18.33
24h
Available quantity: 2
Available
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438