Base Shield V2 - shield with Grove connectors for Arduino
ID: 566567
5906623414369
zł24.40
Tax included
zł19.84 tax excl.
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
Description
Base Shield V2 is an extension designed for tiles with a connector compatible with Arduino shields (such as Arduino Uno Rev3, Arduino Mega2560 , Seeeduino V4.2, Seeduino LoraWan, Arduino Leonardo , Arduino 101 , Arduino Due , Intel Edison , Linkit One). The module has Grove connectors, which can be connected to Grove-compatible modules / sensors. This allows you to quickly design prototypes of devices without tangled wires.
properties
- Works with tiles: Arduino Uno Rev3, Arduino Mega2560 , Seeeduino V4.2, Seeduino LoraWan, Arduino Leonardo , Arduino 101 , Arduino Due , Intel Edison , Linkit One
- It has 16 connectors compatible with the Grove standard
- 4 x connectors with analog input
- 7 x connectors with digital input / output
- 1 x connector with UART interface
- 4 x connector with I2C interface
- Reset button
- Supply voltage 3.3 / 5V
- Dimensions: 69 x 53 x 23 mm
- Weight: 25 g
Description of leads
- Analog ports (A0 ... A3)
- Digital ports (D2 ... D8)
- UART interface port
- I2C interface ports
- Power switch (3.3 / 5 V)
- RESET button
- LED indicating power supply
- Configuration jumper (when used with the Seeeduino V3 board)
566567
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A small module with a temperature sensor (thermistor). As the temperature changes, the resistance of the thermistor changes, which allows the temperature to be measured in the range from -40 to 125 ° C with an accuracy of 1.5 ° C. The module has a connector in accordance with the Grove standard. Seeed studio 101020015
zł15.36
24h
Available quantity: 2
Available
Module with a slide potentiometer. Depending on the position of the slider, the resistance value (maximum resistance 10kΩ) changes, which translates into the voltage value at the analog output of the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020036
zł32.04
24h
Available quantity: 1
Available
A small module with a PIR motion sensor. It allows detecting movement within a maximum range of 6 meters (default up to 3 meters). The measuring angle is 120 degrees. The module has a connector in accordance with the Grove standard. Seeed Studio 101020020
zł49.90
Delivery date unknown
No product available!
Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049
zł38.14
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
zł62.32
24h
Available quantity: 5
Available
A small module - an infrared emitter (LED IR). The diode emits infrared light with a wavelength of 940 nm. With the help of the module, it is possible to transmit commands or signals that can be received by an infrared receiver. The transmission range is up to 10 meters. Seeed studio 101020026
zł18.45
24h
Available quantity: 2
Available
Module with digital light sensor TSL2561. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020030
zł30.71
24h
Available quantity: 1
Available
Module with 4-digit 7-segment display with red digits. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
zł33.37
24h
Available quantity: 2
Available
A small servo (23 x 11.5 x 24 mm) with a weight of 8.6 g, power supply 4.8-6V, maximum torque 1.8 kg / cm (at 6V). It has a connector compatible with the Grove standard. Seeed Studio 316010005
zł36.11
24h
Available quantity: 2
Available
MH-Z16 carbon dioxide sensor with Grove connector. It communicates via the UART interface. Seeed Studio 101020067
zł563.83
24h
Available quantity: 1
Available
Speech recognition module with Nuvoton ISD9160 system, microphone, Flash memory and speaker output. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020232
zł104.60
24h
Available quantity: 2
Available
Recorder v3.0 is a module that allows you to record and play sounds. The module was based on the ISD9160FI system, it also has a FLASH memory with a capacity of 2 MB, which allows for recording up to 83 seconds long. The set contains a small loudspeaker on which recorded sounds can be played. Seeed studio 107020029
zł60.82
24h
Available quantity: 1
Available
Module with a reflection sensor (line sensor) RS-06WD. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020172
zł22.18
24h
Available quantity: 2
Available
The module allows the detection of volatile organic compounds (VOC) in the air, based on Winsen\'s WSP2110 system. Allows for detection in the air; formaldehyde (HCHO), methane, benzene, toluene, alcohol, etc. The sensor output is an analog signal. Seeed studio 101020001
zł79.32
24h
Available quantity: 4
Available
Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007
zł84.92
24h
Available quantity: 1
Available
Module with a pulse sensor (heart rate). The board is equipped with a Grove connector and a digital output in the form of pulses. Seeed Studio 101020033
zł72.41
4 weeks
No product available!
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 13
Available
3-port I2C splitter module. The board is equipped with Grove connectors and allows you to connect additional I2C devices. Seeed Studio 103020006
zł15.72
24h
Available quantity: 4
Available
Module with a voltage divider. Equipped with a Grove connector, it allows the input voltage to be reduced by 3 or 10 times. Seeed Studio 104020000
zł28.20
4 weeks
No product available!
Base plate designed for NodeMCU (ESP8266 WIFI). The module is an expansion board that allows you to plug the NodeMCU into the slot and use the Grove sensor ports. Seeed Studio 105020008
zł57.18
24h
Available quantity: 4
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000