Grove Carbon Dioxide Sensor - CO2 MH-Z16 sensor
ID: 564226
5906623414291
zł563.83
Tax included
zł458.40 tax excl.
MH-Z16 carbon dioxide sensor with Grove connector. It communicates via the UART interface. Seeed Studio 101020067
Description
MH-Z16 carbon dioxide sensor, which enables gas concentration measurement in the range from 0 to 2000 ppm. It is characterized by high measurement accuracy up to 200 ppm with a resolution of 1 ppm. It is based on infrared (NDIR) technology and has built-in temperature compensation. The sensor is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the UART interface and is supplied with the voltage of 4.5 V to 6 V. It can be used in areas such as monitoring of production processes. Full documentation with examples of use is available on the product page.
Features
- Measuring range: 0 to 2000 ppm
- Accuracy: 200 ppm
- Resolution: 1 ppm
- Time to first measurement: 3 min
- Response time: up to 90 seconds
- UART interface
- Supply voltage: 4.5 V to 6 V
- Current consumption: 50 mA
- Working temperature: 0 to 50℃
- Working humidity: 0% to 90% RH
Kit contains
- Grove Carbon Dioxide Sensor
- Grove cable
564226
Data sheet
- Interface
- UART
- Type of sensor
- inny
- Power supply voltage
- 4.5..5.5V
- Concentration measurement
- CO2
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
24h
Available quantity: 28
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020128
zł52.25
24h
Available quantity: 4
Available
A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006
zł97.67
24h
Available quantity: 5
Available
Module with PM2.5 HM3301 dust sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020613
zł150.23
24h
Available quantity: 1
Available
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł25.26
24h
Available quantity: 3
Available
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply. Seeed Studio 101020078
zł58.12
24h
Available quantity: 3
Available
Module with vibration sensor LDT0-028. The board is equipped with a Grove connector and has a digital output. Seeed Studio 101020031
zł33.78
4 weeks
No product available!
Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020353
zł29.42
4 weeks
No product available!
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
zł104.00
24h
Available quantity: 1
Available
A 4-core cable with a length of 50 cm, both terminated with a Grove plug. Seeed Studio 110990038
zł15.19
4 weeks
No product available!
A 4-core cable with a length of 30 cm, both terminated with a Grove plug. Seeed Studio 110990040
zł10.74
4 weeks
No product available!
Module with a 9-axis IMU sensor, which combines an accelerometer and a gyroscope (ICM20600 system) and a magnetometer (AK09918 system). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020585
zł57.91
24h
Available quantity: 2
Available
Module with a 2-channel inductive sensor LDC1612. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020599
zł79.54
24h
Available quantity: 3
Available
Module with MQ5 LPG concentration sensor. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020056
zł55.95
24h
Available quantity: 2
Available
The expansion module is designed for Wio Lite tiles and compatible with Adafruit Feather. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020252
Regular pricezł30.81zł23.74
24h
Available quantity: 10
Available
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 5°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020894
zł360.69
4 weeks
No product available!
4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210
zł8.84
24h
Available quantity: 2
Available
MH-Z16 carbon dioxide sensor with Grove connector. It communicates via the UART interface. Seeed Studio 101020067