Grove Digital Light Sensor - module with TSL2561 light sensor
ID: 564222
5906623414253
zł32.15
Tax included
zł26.14 tax excl.
Module with digital light sensor TSL2561. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020030
Description
Module with digital light sensor TSL2561. The system enables the light intensity measurement in the range from 0.1 to 40,000 Lux in the selected spectral range thanks to two photosensitive diodes. It can work in one of three modes: infrared, full spectrum and visible mode. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation with examples of use is available on the product page.
Features
- Three detection modes: infrared, full spectrum and visible mode
- 16 bit output
- Wide measurement range: 0.1 to 40,000 LUX
- Wide operating temperature range: from -40°C to 85°C
- Programmable interrupt function with user-definable high and low threshold settings
- I2C interface
- I2C address: 0x29
- Supply voltage: 3.3 V or 5 V
- Dimensions: 20 x 20 x mm
564222
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
24h
Available quantity: 28
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
Grove module with a proximity sensor, light, color and the ability to detect gestures. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020580
zł87.58
24h
Available quantity: 6
Available
Module with light sensor - LS06-S phototransistor. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020132
zł10.22
24h
Available quantity: 3
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Speech recognition module with Nuvoton ISD9160 system, microphone, Flash memory and speaker output. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020232
zł104.60
24h
Available quantity: 2
Available
intelligent gesture recognition module equipped with an IR camera module PAG7646J1, PAG7661QN (ISP) and a LED for backlighting. Recognizes and interprets hand gestures by recognizing the image recorded by an infrared camera. Seeed Studio 101991067
zł110.09
24h
Available quantity: 2
Available
The expansion module is designed for Raspberry Pi minicomputers. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103030275
zł37.97
24h
Available quantity: 3
Available
Module with 8x8 LED matrix in red and HT16K33 LED driver. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104020089
zł69.62
4 weeks
No product available!
Module with air quality sensor SGP30. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020512
zł51.89
4 weeks
No product available!
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
The module with the tilt sensor, the sensor output is a digital signal. The module has a connector in accordance with the Grove standard. Seeed studio 101020025
zł17.37
24h
Available quantity: 2
Available
The module allows the detection of volatile organic compounds (VOC) in the air, based on Winsen\'s WSP2110 system. Allows for detection in the air; formaldehyde (HCHO), methane, benzene, toluene, alcohol, etc. The sensor output is an analog signal. Seeed studio 101020001
zł79.32
24h
Available quantity: 4
Available
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020128
zł52.25
24h
Available quantity: 4
Available
Module with white LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030009
zł13.16
24h
Available quantity: 2
Available
Module with 24 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020168
zł55.45
24h
Available quantity: 1
Available
The module is compatible with the Grove Base Shield and designed to implement a wireless serial connection. It uses Bluetooth 4.0 (BLE) HM-11 and UART communication. Seeed Studio 113020008
zł137.11
24h
Available quantity: 3
Available
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
zł62.32
24h
Available quantity: 5
Available
The module with the MAX31850K amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via 1-Wire. Seeed Studio 101020555
zł82.45
24h
Available quantity: 2
Available
LM386 audio amplifier module in a set with a loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 101020853
zł57.54
24h
Available quantity: 2
Available
Module with a gesture sensor PAJ7620U2, which allows to recognize up to 13 gestures. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020083
zł60.29
4 weeks
No product available!
Module with digital light sensor TSL2561. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020030