Grove Adjustable PIR Motion Sensor - module with PIR motion sensor
ID: 583139
5906623415489
zł35.44
Tax included
zł28.81 tax excl.
Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020617
Description
A module with a PIR S16-L221D motion sensor, which allows you to detect motion at a distance of up to 3 meters with a detection angle of 80 degrees. It uses an infrared signal generated from the body, e.g. a human, and the output signal is triggered by movement. It is perfect for alarm systems or other systems that require human presence detection. There are two potentiometers on the board, which allow to adjust the duration of the high signal after motion detection and the detection range. The module is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. It communicates via a digital interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation with examples of use is available on the product page.
Features
- Detection range: up to 3 m
- Recommended detection range: up to 2 m
- Detection angle: 80 ° (X) x 55 ° (Y)
- Adjustable duration of high state after motion detection up to 130 s
- Supply voltage: 3.3 V or 5 V
- Current consumption: up to 20 uA
- Dimensions: 40 x 20 x 15 mm
- Weight: 4.5 g
Kit contains
- Grove Adjustable PIR Motion Sensor
- Grove cable
583139
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 82
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular pricezł207.92zł188.92
24h
Available quantity: 44
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 22
Available
Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020353
zł29.42
24h
Available quantity: 1
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with a humidity sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020018
zł17.64
24h
Available quantity: 2
Available
Module with a voltage divider. Equipped with a Grove connector, it allows the input voltage to be reduced by 3 or 10 times. Seeed Studio 104020000
zł28.33
24h
Available quantity: 3
Available
4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210
zł8.84
24h
Available quantity: 13
Available
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091
zł97.81
24h
Available quantity: 1
Available
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020452
zł89.67
24h
Available quantity: 2
Available
Module for recording sounds, which can store recordings up to 20 seconds. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 107020007
zł37.82
24h
Available quantity: 2
Available
Module with an IR receiver operating at a frequency of 38 kHz. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020016
zł19.93
24h
Available quantity: 3
Available
Module with 42 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020173
zł120.42
24h
Available quantity: 1
Available
Module with the alcohol sensor MQ303A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020044
zł43.95
24h
Available quantity: 1
Available
A set with a radio transmitter and receiver operating at 315 MHz. The modules are equipped with Grove connectors and communicate via a digital interface. Seeed Studio 113020001
zł50.26
24h
Available quantity: 2
Available
The module with the MAX31850K amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via 1-Wire. Seeed Studio 101020555
zł82.45
24h
Available quantity: 2
Available
The module with an electromagnet is powered by a DC voltage of 3.3/5V V with a holding force of 1 kg. It can be used to build a DIY electromagnetic lock, smart cabinet or door. Seeed Studio 101020073
zł53.63
24h
Available quantity: 1
Available
UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192
zł38.38
24h
Available quantity: 2
Available
Red mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070020
zł10.39
24h
Available quantity: 1
Available
Module with a gas concentration sensor MQ9, which enables the detection of carbon monoxide and combustible gases (methane, propane). The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020045
zł55.71
24h
Available quantity: 3
Available
The Hall sensor module allows magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Grove standard. Seeed studio 101020046
zł37.11
4 weeks
No product available!
Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020617