Grove Barometer - module with pressure sensor HP206C
ID: 583121
5906623415441
zł131.47
Tax included
zł106.89 tax excl.
Module with a pressure sensor with high accuracy HP206C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020068
Description
The module with a pressure sensor HP206C, which is characterized by high measurement accuracy up to 0.01 hPa in the range from 300 to 1200 hPa. It makes it possible to obtain values not only of atmospheric pressure, but also altitude and temperature. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C interface and is supplied with the voltage of 3.3 V or 5 V. It is perfect for the design of flying objects or weather stations, where high accuracy of measurements is required. Full documentation with examples of use is available on the product page.
Features
- Measurement range: from 300 to 1200 hPa
- Accuracy: up to 0.01 hPa
- Programmable events and interrupt control
- Data Compensation
- Temperature and altitude measurement
- Very low energy consumption
- Height resolution up to 0.01 meters
- I2C interface
- I2C address: 0x76
- Supply voltage: 3.3 V or 5 V
- Current consumption: up to 1100 uA
- Dimensions: 40 x 20 mm
- Weight: 10 g
Kit contains
- Grove Barometer module
- Grove cable
583121
Data sheet
- Interface
- I2C
- Type of sensor
- inny
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 55
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular pricezł207.92zł188.92
24h
Available quantity: 35
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 21
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with a magnetic sensor based on the CT10 reed switch. CT10 is a unipolar reed switch, normally open. The sensor reacts to the action of an electromagnet, permanent magnet or a combination thereof. The module has a connector in accordance with the Grove standard. Seeedstudio 101020038
zł19.83
24h
Available quantity: 1
Available
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020170
zł39.21
24h
Available quantity: 2
Available
Module with OLED 0.96" display with a resolution of 128x64 px. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 104030008
zł94.59
24h
Available quantity: 3
Available
Module with a button and blue LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020046
zł12.47
24h
Available quantity: 1
Available
A set with a radio transmitter and receiver operating at 433 MHz. The modules are equipped with Grove connectors and communicate via a digital interface. Seeed Studio 104020002
zł62.15
24h
Available quantity: 2
Available
Module with a MLX90640 thermal imaging camera with a 32x24 field matrix and a 55° viewing angle. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020141
zł887.62
4 weeks
No product available!
3-port I2C splitter module. The board is equipped with Grove connectors and allows you to connect additional I2C devices. Seeed Studio 103020006
zł15.85
24h
Available quantity: 2
Available
Module with 4-digit 7-segment display with red digits. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
zł33.37
24h
Available quantity: 2
Available
Capacitive soil moisture sensor with analog output. The board is equipped with a Grove connector and communicates via a analog interface. Seeed Studio 101020614
zł30.65
24h
Available quantity: 3
Available
Module with the SLA-05VDC-SL-C relay with a maximum load of 30 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020012
zł52.19
4 weeks
No product available!
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108
zł32.75
24h
Available quantity: 3
Available
Blue mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070022
zł11.54
24h
Available quantity: 2
Available
Module with flashing multi-color LED. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030014
zł12.74
4 weeks
No product available!
Starter kit for the micro:bit v2. The kit includes an expansion module with Grove connectors, Grove modules with sensors and the necessary accessories. Seeed Studio 110060762
zł405.14
24h
Available quantity: 6
Available
Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002
zł54.85
24h
Available quantity: 3
Available
Grove module with a proximity sensor, light, color and the ability to detect gestures. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020580
zł87.58
24h
Available quantity: 6
Available
Module with a pressure sensor with high accuracy HP206C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020068