Grove Gas Sensor (MQ2) - module with gas sensor
ID: 583250
5906623415991
zł34.92
Tax included
zł28.39 tax excl.
Module with a gas concentration sensor MQ2, which enables the detection of LPG, butane, propane, methane, alcohol, hydrogen and smoke. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020055
Description
Module with a gas concentration sensor MQ2, which enables the detection of LPG, butane, propane, methane, alcohol, hydrogen and smoke. It allows you to build a universal, portable gas detector. The sensitivity of gas detection is regulated by a potentiometer. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module has an analog output with a voltage proportional to the measured concentration and is supplied with a voltage of 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Measurement range:
- LPG and Propane: 20 to 5,000 ppm
- Butane: 300 to 5000 ppm
- Methane: 5,000 to 20,000 ppm
- H2: 300 to 5000 ppm
- Alcohol: 100 to 2000 ppm
- Analog interface
- Quick reaction
- Adjustable sensitivity by potentiometer
- Stable performance
- Power supply: 5V
- Power: up to 800 mW
- Size: 40 x 20 mm
- Weight: 16 g
Kit contains
- Grove Gas Sensor (MQ2) module
- Grove cable
583250
Data sheet
- Interface
- Sygnał analogowy
- Type of sensor
- MQ-2
- Power supply voltage
- 5 V
- Concentration measurement
- LPG
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 40
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular pricezł207.92zł188.92
24h
Available quantity: 34
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 21
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Module with the MQ3 alcohol concentration sensor. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020006
zł61.78
Delivery date unknown
No product available!
Module with MQ5 LPG concentration sensor. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020056
zł55.95
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with an infrared sensor AMG8833 (matrix 8x8) designed to measure temperature. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020557
zł238.31
4 weeks
No product available!
Ultrasonic distance sensor with a range from 3 to 350 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020010
zł19.78
24h
Available quantity: 1
Available
GrovePi + is an extension in the form of a HAT overlay intended for Raspberry Pi computers (B / B + / A + / 2/3/3 +). The module has 15 connectors to which modules / sensors compatible with the Grove standard can be connected. Seeed Studio 103010002
zł298.47
24h
Available quantity: 3
Available
Module with BMA456 pedometer, which combines an acceleration sensor and built-in step counting algorithms. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020583
zł38.19
24h
Available quantity: 3
Available
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108
zł32.75
24h
Available quantity: 3
Available
The expansion module is designed for Arduino Nano boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103100124
zł14.80
24h
Available quantity: 1
Available
Module with slot optical sensor TCUT1600X01. The board is equipped with a Grove connector and has two digital outputs. Seeed Studio 101020587
zł56.30
24h
Available quantity: 2
Available
Module with four gas sensors that allow the detection of CO, NO2, alcohol and volatile organic compounds (VOC). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020820
zł158.82
24h
Available quantity: 2
Available
Module with air quality sensor SGP30. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020512
zł51.89
24h
Available quantity: 2
Available
Starter kit with nRF52840-MDK evaluation board and Grove modules designed for the development of Mesh networks. Seeed Studio 110061007
zł453.22
24h
Available quantity: 1
Available
Module with rotary potentiometer. The connector in this module has been moved to the other side of the PCB, which makes it easier to assemble and use this module. The module has a connector in accordance with the Grove standard. Seeed studio 101020048
zł35.28
24h
Available quantity: 1
Available
Module with MLX90615 temperature sensor with a measurement accuracy of 1°C and a resolution of 0.02°C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020077
zł173.93
24h
Available quantity: 1
Available
Module with PM2.5 HM3301 dust sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020613
zł150.23
24h
Available quantity: 1
Available
Module with a button and red LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
zł12.52
24h
Available quantity: 2
Available
Universal module for prototyping. It has 58 prototype fields and a Grove connector. Seeed Studio 101020035
zł11.32
24h
Available quantity: 3
Available
Red mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070020
zł10.39
24h
Available quantity: 1
Available
Module with a gas concentration sensor MQ2, which enables the detection of LPG, butane, propane, methane, alcohol, hydrogen and smoke. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020055