Grove Formaldehyde Sensor (SFA30) - HCHO concentration measurement module
ID: 1178609
zł356.05
Tax included
zł289.47 tax excl.
Module with a sensor of formaldehyde (methanal) concentration in the air. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 101020972
Description
Module with a sensor of formaldehyde (methanal) concentration in the air. It is characterized by high stability, sensitivity and long service life. It also has a system for automatic compensation of the temperature influence on the measurement. It can be used in many air testing applications such as indoor air quality and real-time quality monitoring stations. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C or UART interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Detected gas: HCHO (Methanal)
- Detection range: 0 to 1000 ppb
- Accuracy: ± 20 ppb or ± 20%
- Start time: ≤ 2 minutes
- Grove connector
- I2C or UART interface
- Working time: 6 years
- Supply voltage: 3.3 to 5 V
- Size: 40 x 60 mm
Kit contains
- Grove Formaldehyde Sensor (SFA30)
- 5 pin male goldpin connector
1178609
Data sheet
- Interface
- I2C/UART
- Type of sensor
- SFA30
- Power supply voltage
- 3,3 - 5 V
- Concentration measurement
- pozostałych gazów
Manufacturer BTC Korporacja sp. z o. o. Ludwinowo Zegrzyńskie 52G 05-140 Ludwinowo Zegrzyńskie Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Ludwinowo Zegrzyńskie 52G 05-140 Ludwinowo Zegrzyńskie Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 9
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 40
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 20
Available
4-core cable, 20 cm long, terminated on both sides with a Grove plug. Compatible with the interface used in Seeed Studio and M5Stack modules. Seeed Studio 110990027
zł9.02
24h
Available quantity: 24
Available
A 4-core cable with a length of 30 cm, both terminated with a Grove plug. Seeed Studio 110990040
zł10.74
Delivery date unknown
No product available!
4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210
zł9.07
24h
Available quantity: 20
Available
Other products in the same category (16)
Module with an analog MQ6 propane sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0131
zł32.83
24h
Available quantity: 1
Available
Module with an ozone detection sensor that performs measurements in the range of up to 10 ppm with a resolution of 0.01 ppm. The module is equipped with an I2C interface. DFRobot SEN0321
zł225.71
4 weeks
No product available!
Module with gas sensor SGP30. It allows you to measure the content of total volatile organic compounds (TVOC), carbon dioxide equivalent (eCO2), ethanol and H2 in the air. M5Stack U088
zł60.90
24h
Available quantity: 3
Available
Module with four gas sensors that allow the detection of CO, NO2, alcohol and volatile organic compounds (VOC). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020820
zł158.82
4 weeks
No product available!
Module with a gas concentration sensor MQ9, which enables the detection of carbon monoxide and combustible gases (methane, propane). The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020045
zł49.46
24h
Available quantity: 2
Available
Module with the alcohol sensor MQ303A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020044
zł36.60
24h
Available quantity: 3
Available
Module with Sensirion SCD30 sensor, which enables CO2, temperature and humidity measurement. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020634
zł312.48
24h
Available quantity: 2
Available
Module with a BME680 sensor that allows you to measure temperature, humidity, pressure and gas detection. The board is equipped with a Grove connector and communicates via I2C and SPI. Seeed Studio 101020513
zł103.57
24h
Available quantity: 3
Available
Module with air quality sensor SGP30. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020512
zł49.16
24h
Available quantity: 3
Available
Module with the MQ3 alcohol concentration sensor. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020006
zł19.54
24h
Available quantity: 2
Available
Module with MQ5 LPG concentration sensor. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020056
zł55.95
24h
Available quantity: 2
Available
Module with a gas concentration sensor MQ2, which enables the detection of LPG, butane, propane, methane, alcohol, hydrogen and smoke. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020055
zł41.71
24h
Available quantity: 1
Available
Air quality sensor module based on the SGP40 system. It communicates via the I2C interface. DFRobot SEN0392
zł71.22
24h
Available quantity: 1
Available
Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375
zł79.34
24h
Available quantity: 4
Available
Integrated BME688 gas, pressure, temperature and humidity sensor in one MEMS housing. The system can be supplied with the voltage of 3.3 V and is equipped with an I2C communication interface. BME688 Breakout Board
zł160.07
24h
Available quantity: 3
Available
Module with air quality sensor SGP30. It allows you to read the concentration of VOC (TVOC) and eCO2 and communicates via the I2C interface. Pimoroni PIM480
zł102.93
24h
Available quantity: 1
Available
Module with a sensor of formaldehyde (methanal) concentration in the air. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 101020972