Board with ATmega328 microcontroller - compatible with Arduino Uno R3
ID: 180240
5906623472895
zł53.71
Tax included
zł43.67 tax excl.
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
Description
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface.
Features
- ATmega328 microcontroller (including 32 kB Flash memory - 2 kB occupied by the bootloader, 2 kB RAM, 1kB EEPROM memory)
- 14 digital input / output lines (6 of them can work in PWM mode)
- 6 analogue input lines
- 6-pin ISP programming connector
- Possibility to power from USB or from an additional power supply
- Reset microcontroller button
- Quartz resonator 16 MHz
Dimensions
Included
- Board with ATmega328 microcontroller
- USB A / USB B cable
180240
Data sheet
- Microcontroller
- ATmega328
- Core
- AVR
- Frequency
- 16MHz
- Flash memory
- 32kB
- RAM
- 2kB
- EEPROM memory
- 1kB
- Number of digital pins
- 20
- Number of PWM channels
- 6
- Ilość wejść analogowych
- 6
- ADC
- 1x 10bit
- DAC
- none
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- GSM/GPRS module
- No
- Logic voltage
- 5 V
- MicroSD slot
- No
- Supply voltage min
- 7
- Supply voltages max
- 12 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Adafruit 1651, 2.8" TFT Touch Shield for Arduino v2
zł140.85
24h
Available quantity: 4
Available
Pololu 2512Module with 2-channel DC motor driver for Arduino boards. It allows you to control drives with a supply voltage from 6 to 32 V and a current consumption of up to 0.65 A. Pololu 2512
zł66.92
24h
Available quantity: 3
Available
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega
zł129.00
Delivery date unknown
No product available!
Arduino LCD Shield with a 4 digit 7 segment digital tube display (common cathode). DFR0382
zł60.41
24h
Available quantity: 3
Available
Chassis Romi Chassis Kit is the ideal base for building a small mobile robot. The set contains all the necessary mechanical elements for building a mobile circular robot. Self-assembly set. Polol 3504
zł170.97
24h
Available quantity: 1
Available
The overlay allows for easier connection of wires to the Arduino UNO R3 board. Thanks to the screw connections, it is possible to fast and securely fix the cable, and the built-in female connectors allow the application of additional Arduino shields. Screw shield
zł15.76
24h
Available quantity: 2
Available
A set of stickers with a description of the pins dedicated to the Maker UNO plates. Cytron MAKER-UNO-STICKER
zł2.10
24h
Available quantity: 12
Available
Other products in the same category (16)
Microcontroller board based on Leaf Maple, STM32F103RB, USB, RoHS
Regular pricezł125.71zł89.85
24h
Available quantity: 1
Available
Development board with SAMD21G18 microcontroller. It offers operating frequency up to 48 MHz, 256kB FLASH memory and 32kB SRAM.
zł62.39
4 weeks
No product available!
Development board with ATmega328P microcontroller compatible with Arduino Uno Rev3. Waveshare R3 PLUS
zł86.21
24h
Available quantity: 2
Available
Board with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. USB-UART converter based on the ATmega16u2 chip. The user has at his disposal, among others: 54 I/O lines, 14 PWM channels, 16 analog inputs.
zł79.85
24h
Available quantity: 4
Available
Board compatible with Arduino Nano. It is based on the ATmega328P microcontroller with 32 KB Flash, 2 KB SRAM and 1 KB EEPROM. It has 12 LEDs, a buzzer and a user button. Cytron Maker Nano
zł42.16
24h
Available quantity: 20
Available
A miniature development board with ATtiny85 microcontroller, on which 6 I / O pins were derived. The module is supported by Arduino IDE. modATT85
zł14.60
24h
Available quantity: 10
Available
Board with Atmel ATmega328P microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł27.90
3 weeks
No product available!
Development board with NXP iMX RT1011 processor with ARM Cortex M7 core equipped with AirLift WiFi module. It has Arduino UNO compatible connectors and a STEMMA QT connector for I2C devices. Adafruit 4950
zł186.87
4 weeks
No product available!
The board is compatible with Arduino, based on the ATmega328P microcontroller from the AVR family, 14 I/O lines, 6 PWM channels, 6 analog inputs are available to the user. The CH340G chip communicates via a USB interface. In addition, it has 12 LEDs, a programmable button and a embedded buzzer. Cytron Uno Maker
zł41.14
24h
Available quantity: 4
Available
Equipped with an equivalent Atmel ATmega328 microcontroller from the AVR family, the board offers 14 I/O lines, 6 PWM channels, and 6 analog inputs. An additional chip communicates via the USB interface
zł55.78
24h
Available quantity: 62
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819
zł73.63
4 weeks
No product available!
Board compatible with Arduino, equipped with the ATmega32U4 microcontroller
zł31.70
24h
Available quantity: 6
Available
Microcontroller board based on the ATmega328P
zł35.58
24h
Available quantity: 25
Available
Development board with ATmega4809 microcontroller and Microchip ECC608 cryptographic chip. It is equipped with 6 analog input pins, 14 digital inputs/outputs (5 as PWM output) and Grove ports. Seeed Studio 102010288
zł96.26
24h
Available quantity: 1
Available
Compact microcontroller board with an ATmega32U4 chip that integrates with USB to act as a HID device such as a keyboard or mouse. It operates at 5V at 16MHz, offering 20 digital I/O lines, of which 7 support PWM and 12 act as analog inputs.
zł53.85
24h
Available quantity: 33
Available
Microcontroller board based on the ATmega32u4
zł36.92
24h
Available quantity: 8
Available
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface