Fermion: BME680 Environmental Sensor - module with 4in1 environmental sensor
ID: 584953
5906623406906
zł79.85
Tax included
zł64.92 tax excl.
Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375
Description
A module with an advanced 4-in-1 sensor that measures environmental conditions such as the concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. It was based on the BOSCH BME680 MEMS system. The system is supplied with the voltage in the range of 3.3 to 5.5 V and can communicate via the I2C or SPI interface. The module will be used in projects involving air condition monitoring, e.g. in home automation, small weather stations or the Internet of Things (IoT). Thanks to the technology used, it has a small size and is characterized by low energy consumption. The product wiki page offers full documentation with examples of use.
Features
- Relative humidity:
- Measurement range: 0% to 100%
- Accuracy: ± 3% RH
- Resolution: ± 0.008% RH
- Temperature:
- Measurement range: -40°C to 85°C
- Accuracy: ± 0.5°C to ± 1°C
- Resolution: 0.01°C
- Pressure
- Working range: 300 hPa to 1100 hPa
- Relative Accuracy: ± 12Pa
- Absolute accuracy: ± 60Pa
- Resolution: 0.18Pa, the highest oversampling
- Air quality measurement range: 0-500 (the higher the value, the worse the air condition)
- I2C, SPI interface
- I2C addresses: 0x76
- Voltage: 3.3 to 5.5 V
- Current consumption: 5 mA
- Dimensions: 18 x 15.6 mm
Kit contains
- Fermion module: BME680 Environmental Sensor
- Straight 4-pin connector
- Straight 6-pin connector
584953
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- BME680
- Power supply voltage
- 3,3 - 5 V
- Concentration measurement
- VOC
- Sensor type
- Pressure, temperature, humidity, volatile organic compounds
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
Delivery date unknown
No product available!
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
Delivery date unknown
No product available!
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
zł4.90
24h
Available quantity: 23
Available
10 DoF module with ADXL345 accelerometer, HMC5883L magnetometer, ITG-3205 gyroscope and BMP280 barometer. Communication via the I2C interface. DFRobot SEN0140
zł58.38
24h
Available quantity: 3
Available
Module with 11-channel AS7341 sensor that allows to detect light in different wavelength ranges (color detection). It communicates via the I2C interface. DFRobot SEN0365
zł85.08
24h
Available quantity: 1
Available
Other products in the same category (16)
Air quality sensor module based on the ENS160 system. It communicates via the I2C or SPI interface. DFRobot SEN0515
zł67.69
24h
Available quantity: 5
Available
Air quality sensor module based on the ENS160 system. It communicates via the I2C interface (Gravity connector). DFRobot SEN0514
zł91.17
24h
Available quantity: 2
Available
Module with CO2, temperature and humidity sensor SCD-41. Equipped with a Qwiic/STEMMA QT connector, it communicates via the I2C interface. Pimoroni PIM587
zł400.32
24h
Available quantity: 2
Available
A sensor that detects the oxygen concentration. Equipped with a factory calibrated probe. It communicates via the UART interface or the analog output. Seeed Studio 101020912
zł539.04
4 weeks
No product available!
Module with a sensor of formaldehyde (methanal) concentration in the air. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 101020972
zł356.05
4 weeks
No product available!
Module with a BME688 sensor for measuring gas concentration, pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-19096
zł196.21
24h
Available quantity: 3
Available
Module with an oxygen concentration sensor in the environment. It allows you to measure the volume of oxygen in the range from 0 to 100%. It communicates via the I2C interface. DFRobot SEN0496
zł498.61
4 weeks
No product available!
Module with ENS160 gas sensor for measuring the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via the I2C or SPI interface. Adafruit 5606
zł129.42
24h
Available quantity: 1
Available
Module with an analog MQ2 gas sensor. It enables the detection of LPG, butane, propane, methane, alcohol, hydrogen and smoke. It is powered with the voltage of 5 V and has an analog output
zł10.34
24h
Available quantity: 10
Available
Module with the MQ3 analog alcohol sensor. It allows you to detect gas and build a simple breathalyzer. The module is powered by 5 V and has an analog output
zł14.62
24h
Available quantity: 11
Available
ENS160 gas sensor module to measure the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via an I2C or SPI interface. SparkFun SEN-20844
zł119.84
24h
Available quantity: 3
Available
A sensor used to detect pollutants in the air by measuring gases such as hydrogen, ethanol and carbon monoxide. It is used in various areas, such as the food industry, chemical industry, air quality control in laboratories and environmental monitoring. Figaro TGS2600
zł25.72
4 weeks
No product available!
A sensor used to detect air pollutants by measuring VOCs and gases such as ammonia or hydrogen sulfide. It is used in various areas, such as the food industry, chemical industry, air quality control in laboratories and environmental monitoring. Figaro TGS2602
zł31.33
24h
Available quantity: 14
Available
SCD41 CO2, temperature and humidity sensor module. Equipped with a Gravity connector, it communicates via an I2C interface. DFRobot SEN0536
zł192.70
24h
Available quantity: 2
Available
The SCD-41 CO2, temperature and humidity sensor module provides high accuracy readings. It is equipped with a Qwiic connector and communicates via an I2C interface. SparkFun SEN-22396
zł432.23
24h
Available quantity: 1
Available
The SCD-40 CO2, temperature and humidity sensor module provides high accuracy readings. It is equipped with a Qwiic connector and communicates via an I2C interface. SparkFun SEN-22395
zł484.35
24h
Available quantity: 1
Available
Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375