STEMMA QT BME680 Temperature, Humidity, Pressure and Gas Sensor - module with 4in1 environmental sensor
ID: 587246
5906623433698
zł105.20
Tax included
zł85.53 tax excl.
Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660
Description
A module with an advanced 4-in-1 sensor that measures environmental conditions such as the concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. It is based on the BOSCH BME680 MEMS system and can measure humidity with an accuracy of ± 3%, barometric pressure with an absolute accuracy of ± 1 hPa and temperature with an accuracy of ± 1.0 ° C. It will be used in projects involving air condition monitoring, e.g. in home automation, small weather stations or the Internet of Things (IoT). Thanks to the technology used, it has a small size and is characterized by low energy consumption. The module is powered with the voltage from 3 V to 5 V, and communication is via the I2C interface (STEMMA QT connector) or SPI. It works perfectly in robotics as a measurement sensor, e.g. in drones. Full documentation is available on the product page.
Features
- Relative humidity:
- Measurement range: 0% to 100%
- Accuracy: ± 3% RH
- Resolution: ± 0.008% RH
- Temperature:
- Measurement range: -40°C to 85°C
- Accuracy: ± 0.5°C to ± 1°C
- Resolution: 0.01°C
- Pressure
- Working range: 300 hPa to 1100 hPa
- Relative Accuracy: ± 12Pa
- Absolute accuracy: ± 60Pa
- Resolution: 0.18Pa, the highest oversampling
- Air quality measurement range: 0-500 (the higher the value, the worse the air condition)
- I2C, SPI interface
- I2C addresses: 0x77
- Voltage: 3.3 to 5.5 V
Kit contains
- STEMMA QT BME680 Temperature, Humidity, Pressure and Gas Sensor
- 8-pin goldpin male connector
587246
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- BME680
- Power supply voltage
- 3 - 5 V
- Concentration measurement
- VOC
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236
zł83.15
24h
Available quantity: 5
Available
PM2.5 dust sensor powered by 5V, communication via the UART interface. Sharp GP2Y1051AU0F
zł48.04
24h
Available quantity: 2
Available
Module with air quality sensor SGP30. It allows you to read the concentration of VOC (TVOC) and eCO2 and communicates via the I2C interface. Pimoroni PIM480
zł102.93
24h
Available quantity: 1
Available
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł11.89
24h
Available quantity: 8
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł11.94
Delivery date unknown
No product available!
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł9.21
24h
Available quantity: 20
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.50
24h
Available quantity: 32
Available
Other products in the same category (16)
Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335
zł132.32
24h
Available quantity: 1
Available
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466
zł109.00
24h
Available quantity: 3
Available
Module with the MQ3 analog alcohol sensor. It enables gas detection and construction of a simple breathalyzer. The module is powered by 5 V and has an analog output. DFRobot SEN0128
zł33.27
24h
Available quantity: 1
Available
Module with an analog MQ7 carbon monoxide sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0132
zł46.83
24h
Available quantity: 2
Available
Module with an analog MQ4 methane sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0129
zł32.25
24h
Available quantity: 1
Available
Module with an analog sensor of carbon monoxide and combustible gases (methane, propane) MQ9. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0134
zł41.22
24h
Available quantity: 1
Available
Module with an analog MQ2 gas sensor. It enables the detection of LPG, butane, propane, methane, alcohol, hydrogen and smoke. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0127
zł33.27
24h
Available quantity: 1
Available
Module with an analog MQ8 hydrogen sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0133
zł44.06
24h
Available quantity: 1
Available
Module with an analog MQ5 LPG sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0130
zł29.50
24h
Available quantity: 1
Available
Module with an analog MQ6 propane sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0131
zł32.83
24h
Available quantity: 1
Available
Module with an ozone detection sensor that performs measurements in the range of up to 10 ppm with a resolution of 0.01 ppm. The module is equipped with an I2C interface. DFRobot SEN0321
zł225.71
4 weeks
No product available!
Module with gas sensor SGP30. It allows you to measure the content of total volatile organic compounds (TVOC), carbon dioxide equivalent (eCO2), ethanol and H2 in the air. M5Stack U088
zł60.90
24h
Available quantity: 3
Available
Module with four gas sensors that allow the detection of CO, NO2, alcohol and volatile organic compounds (VOC). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020820
zł158.82
24h
Available quantity: 1
Available
Module with a gas concentration sensor MQ9, which enables the detection of carbon monoxide and combustible gases (methane, propane). The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020045
zł49.46
24h
Available quantity: 2
Available
Module with the alcohol sensor MQ303A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020044
zł43.95
24h
Available quantity: 1
Available
Module with Sensirion SCD30 sensor, which enables CO2, temperature and humidity measurement. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020634
zł298.42
4 weeks
No product available!
Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660