STEMMA QT SCD-41 - module with CO2, temperature and humidity sensor
ID: 587307
5906623430734
zł486.45
Tax included
zł395.49 tax excl.
Module with CO2, temperature and humidity sensor SCD-41. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5190
Description
Module with CO2, temperature and humidity sensor SCD-41. It allows you to measure the concentration of carbon dioxide in the environment in the range from 400 to 5000 ppm. In addition, the system has an integrated temperature and humidity sensor, which makes it suitable for detecting environmental parameters, scientific experiments and air quality tests. It can work with systems with a working voltage of 3.3 V or 5 V, and communication is via the I2C interface (STEMMA QT connector). Full documentation with examples is available on the product page.
Features
- Photoacoustic CO2 sensor
- Integrated temperature and humidity sensor
- CO2 measuring range: 400 ppm - 5000 ppm
- Accuracy: ± (40 ppm + 5% of reading)
- Current consumption: 17 mA (measurement time = 5 s) / 0.5 mA (measurement time = 5 min)
- Fully calibrated
- I2C digital interface (address 0x61)
- Power supply: 3.3 V to 5 V
- Sensor element size: 10.1 x 10.1 x 6.5mm
- Module dimensions: 25.5 x 22.8 x 7.7 mm
Kit contains
- Adafruit SCD-41 True CO2, Temperature and Humidity Sensor module
- 6-pin straight male goldpin connector
587307
Data sheet
- Interface
- I2C
- Type of sensor
- inny
- Power supply voltage
- 3,3 - 5 V
- Concentration measurement
- CO2
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł11.89
24h
Available quantity: 10
Available
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł9.21
24h
Available quantity: 26
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.90
24h
Available quantity: 10
Available
Other products in the same category (16)
Module with MQ5 LPG concentration sensor. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020056
zł55.95
24h
Available quantity: 2
Available
Module with a gas concentration sensor MQ2, which enables the detection of LPG, butane, propane, methane, alcohol, hydrogen and smoke. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020055
zł41.71
24h
Available quantity: 2
Available
Air quality sensor module based on the SGP40 system. It communicates via the I2C interface. DFRobot SEN0392
zł72.52
24h
Available quantity: 1
Available
Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375
zł79.85
24h
Available quantity: 2
Available
Integrated BME688 gas, pressure, temperature and humidity sensor in one MEMS housing. The system can be supplied with the voltage of 3.3 V and is equipped with an I2C communication interface. BME688 Breakout Board
zł159.90
2 weeks
No product available!
Module with air quality sensor SGP30. It allows you to read the concentration of VOC (TVOC) and eCO2 and communicates via the I2C interface. Pimoroni PIM480
zł102.93
24h
Available quantity: 1
Available
Air quality sensor module based on the SGP40 system. The board is equipped with Qwiic connectors. SparkFun SEN-18345
zł95.23
24h
Available quantity: 2
Available
Air quality sensor module based on the SGP40 system. It uses CMOSens® technology by Sensirion and provides information on air quality. Waveshare SGP40 VOC Sensor
zł61.61
4 weeks
No product available!
Module with BME680 sensor to measure the concentration of volatile organic compounds, pressure, temperature and humidity. It communicates via the I2C interface. Pimoroni PIM357
zł115.82
24h
Available quantity: 4
Available
Module with integrated BME688 gas, pressure, temperature and humidity sensor placed in one MEMS housing. It is equipped with an I2C interface. Adafruit 5046
zł101.93
24h
Available quantity: 3
Available
Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660
zł105.20
24h
Available quantity: 1
Available
Module with CO2, temperature and humidity sensor SCD-30. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4867
zł360.73
24h
Available quantity: 1
Available
Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829
zł76.89
24h
Available quantity: 2
Available
Module with CO2, temperature and humidity sensor SCD-41. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5190
zł486.45
24h
Available quantity: 1
Available
Module with CO2, temperature and humidity sensor SCD-40. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5187
zł259.64
24h
Available quantity: 1
Available
Module with an analog gas sensor. It allows you to measure the concentration of NO, NO2 and H2. DFRobot SEN0441
zł45.26
24h
Available quantity: 1
Available
Module with CO2, temperature and humidity sensor SCD-41. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5190