Qwiic Environmental Sensor Breakout - module with BME680 environmental sensor
ID: 581488
5906623420377
zł109.00
Tax included
zł88.62 tax excl.
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466
Description
A module with an advanced 4-in-1 sensor that measures environmental conditions such as the concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. The module is based on the BOSCH BME680 MEMS system. The system is powered with the voltage in the range of 1.71 to 3.6 V and can communicate via the I2C (Qwiic) or SPI interface. The module will be used in projects involving air condition monitoring, e.g. in home automation, small weather stations or the Internet of Things (IoT). Thanks to the technology used, the module has a small size and is characterized by low energy consumption. On the product page there is a guide and the Arduino library.
Features
- Relative humidity:
- Measurement range: 0% to 100%
- Accuracy: ± 3% RH
- Resolution: ± 0.008% RH
- Temperature:
- Measurement range: -40°C to 85°C
- Accuracy: ± 0.5°C to ± 1°C
- Resolution: 0.01°C
- Pressure
- Working range: 300 hPa to 1100 hPa
- Relative Accuracy: ± 12Pa
- Absolute accuracy: ± 60Pa
- Resolution: 0.18Pa, the highest oversampling
- Air quality measurement range: 0-500 (the higher the value, the worse the air condition)
- I2C interface (with Qwiic support), SPI
- I2C addresses: 0x77 (default) or 0x76
- 2x Qwiic connectors
- Voltage: 1.71 V to 3.6 V (3.3 V for Qwiic)
- Current consumption: 2.1 µA to 18 mA, 0.15 µA (sleep mode)
581488
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- BME680
- Power supply voltage
- 1.7..3.6V
- Concentration measurement
- VOC
- Sensor type
- Ciśnienia atmosferycznego
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 2061
Available
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.97
24h
Available quantity: 36
Available
Available
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.56
24h
Available quantity: 22
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.96
24h
Available quantity: 9
Available
Other products in the same category (16)
Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156
zł815.50
3 weeks
No product available!
Integrated BME688 gas, pressure, temperature and humidity sensor in one MEMS housing. The system can be supplied with the voltage of 3.3 V and is equipped with an I2C communication interface. BME688 Breakout Board
zł159.90
24h
Available quantity: 3
Available
Air humidity and temperature sensor with 1-Wire interface.
zł10.86
24h
Available quantity: 13
Available
Module with a digital temperature and humidity sensor based on the SHTC3 system. Communication takes place via the I2C interface. DFRobot SEN0414
zł24.39
24h
Available quantity: 5
Available
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236
zł99.29
24h
Available quantity: 2
Available
Module with BME680 sensor to measure the concentration of volatile organic compounds, pressure, temperature and humidity. It communicates via the I2C interface. Pimoroni PIM357
zł115.82
24h
Available quantity: 4
Available
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C (Qwiic). SparkFun SEN-15440
zł84.89
24h
Available quantity: 3
Available
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 3
Available
Module with temperature and humidity sensor. It allows you to measure temperature in the range from 5 to 50°C and humidity in the range from 10 to 90%. The module communicates via the I2C interface. SparkFun SEN-11295
zł171.68
24h
Available quantity: 2
Available
Ideal for environmental sensing and data logging and perfect for build a weather stations or humidor control system; built-in 4.7KΩ pullup resistors for I2C communications. SEN-13763
zł57.29
24h
Available quantity: 3
Available
Module with a temperature and humidity sensor based on the HTU31 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4832
zł39.52
24h
Available quantity: 3
Available
No product available!
KAmod Si7021 is a compact module with a digital temperature and humidity sensor, operated via the I2C interface, dedicated to environmental applications. Qwire connectors and the traditional 2.54 mm pitch provide easy integration with various hardware platforms.
zł39.20
24h
Available quantity: 197
Available
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM472
zł75.68
24h
Available quantity: 7
Available
The AM2315C is an advanced packaged temperature and humidity sensor offering easy integration with microcontrollers thanks to its 2.5V-5.5V power supply and standard I2C interface, providing greater resistance to external conditions than typical SHT sensors, with measurement accuracy of ±2% RH and ±0.3°C
zł79.00
24h
Available quantity: 19
Available
Compact expansion with advanced data monitoring features, equipped with temperature, humidity, light sensors and RTC clock. With low power consumption, battery monitoring function and I2C protocol support, it is ideal for long-term battery-powered projects, offering precise measurements and efficient power management. Seeed Studio 114993446
zł45.51
24h
Available quantity: 5
Available
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466