Grove I2C High Accuracy Temp&Humi - module with SHT35 sensor
ID: 583189
5906623416349
zł63.76
Tax included
zł51.84 tax excl.
Module with SHT35 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020592
Description
Module with SHT35 temperature and humidity sensor. It is characterized by high reliability and stability with low energy consumption, fast response and resistance to interference. The sensor is internally calibrated. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Humidity measurement range: 0% RH to 100% RH
- Humidity measurement accuracy: ± 1.5% RH @ 0% RH to 80% RH (at 25℃)
- Temperature measurement range: -40℃ to 125℃
- Temperature measurement accuracy: ± 0.2°C at -40°C to 90°C
- Interface: I2C
- I2C address: 0x45 (default), 0x44
- Supply voltage: 3.3 V or 5 V
- Dimensions: 20 x 40 x 6 mm
- Weight: 3.1 g
Kit contains
- Grove I2C High Accuracy Temp&Humi mode
- Grove cable
583189
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 16
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 205
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 14
Available
Other products in the same category (16)
Module with Grove connector equipped with AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface. Seeed Studio 101020692
zł29.21
24h
Available quantity: 3
Available
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 3
Available
Grove module with a proximity sensor, light, color and the ability to detect gestures. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020580
zł87.58
24h
Available quantity: 5
Available
Grove module with FSR402 pressure sensor. The board is equipped with a Grove connector with an analog output. Seeed Studio 101020553
zł82.18
24h
Available quantity: 1
Available
Module with GSR skin resistance sensor. It is used to measure skin activity, which reflects the stress response and experienced emotions. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020052
zł46.84
24h
Available quantity: 3
Available
Module with an EMG signal detector. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020058
zł149.04
4 weeks
No product available!
Qwiic to Grove adapter cable, 100 mm long. Enables interoperability between the SparkFun Qwiic Connect system and Seeed Studio I2C-based Grove boards. SparkFun PRT-15109
zł9.99
3 weeks
No product available!
Module with temperature sensor MCP9808. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020556
zł25.76
24h
Available quantity: 3
Available
Module with LCD display 16x2 characters with RGB backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104030001
zł99.68
24h
Available quantity: 2
Available
Module with a 12-channel capacitive touch sensor MPR121. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020872
zł33.84
24h
Available quantity: 2
Available
Module with temperature and humidity sensor DHT11. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020011
zł22.00
24h
Available quantity: 3
Available
Ultrasonic distance sensor with a range from 3 to 350 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020010
zł19.14
4 weeks
No product available!
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 5°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020894
zł360.69
4 weeks
No product available!
Module with a MLX90641 thermal imaging camera with a 16x12 field matrix and a 110° viewing angle. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020892
zł547.69
24h
Available quantity: 1
Available
Grove vertical socket for surface mounting, 4-pin, pitch 2.0 mm. Set of 20 pieces. Seeed Studio 114020163
zł6.41
24h
Available quantity: 10
Available
Module with an infrared sensor AMG8833 (matrix 8x8) designed to measure temperature. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020557
zł238.31
4 weeks
No product available!
Module with SHT35 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020592