STEMMA QT Sensirion SHT40 Temperature & Humidity Sensor - module with a temperature and humidity sensor
ID: 587209
5906623430093
zł28.40
Tax included
zł23.09 tax excl.
Module with a temperature and humidity sensor based on the SHT40 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4885
Description
Module with a temperature and humidity sensor based on the SHT40 system by Sensirion. It is characterized by high reliability and stability with low energy consumption, fast response and resistance to interference. It has an accuracy of ± 1.8% when measuring relative humidity from 25 to 75% and an accuracy of ± 0.2°C when measuring temperature from 0 to 75°C. The module is compatible with 3.3 V and 5 V controllers, and communication is via the I2C interface (STEMMA QT connector). Full documentation is available on the product page.
Features
- Temperature measurement:
- Range: -40 to 125 ° C
- Resolution: 0.01 ℃
- Accuracy: ± 0.2 ° C
- Response time: 2s
- Moisture measurement:
- Range: 0 to 100% RH
- Resolution: 0.01%
- Accuracy: ± 1.8% RH
- Response time: 6 s
- I2C interface (address 0x44)
- Supply voltage: 3.3 V to 5 V
- Quiescent current: up to 80 nA
Kit contains
- STEMMA QT Sensirion SHT40 Temperature & Humidity Sensor
- 6-pin goldpin connector
587209
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł10.47
24h
Available quantity: 15
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł12.35
24h
Available quantity: 17
Available
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł9.10
24h
Available quantity: 25
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.56
24h
Available quantity: 22
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.96
24h
Available quantity: 9
Available
Other products in the same category (16)
Module with a pressure, temperature and humidity sensor based on the MS8607. Equipped with a STEMMA QT connector, it communicates via the I2C. Adafruit 4716
zł75.89
24h
Available quantity: 1
Available
Module with ENS160 gas sensor for measuring the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via the I2C or SPI interface. Adafruit 5606
zł129.42
24h
Available quantity: 2
Available
The expansion module is designed to work with the Raspberry Pi 400. The board has a 40-pin connector placed in a vertical position and a connector for RPI 400 at an angle of 45°. Adafruit 4862
zł40.98
24h
Available quantity: 2
Available
Module with a 3-axis magnetic field sensor LIS3MDL. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4479
zł50.17
24h
Available quantity: 2
Available
This adapter allows you to quickly connect Sensirion SEN6x sensors to microcontrollers and minicomputers. An integrated JST GH connector, 3.3V regulator, and logic level converter ensure full compatibility with 3.3V and 5V systems. Thanks to the STEMMA QT connector, the adapter supports I2C communication and works with Raspberry Pi, Arduino, Feather, and Sensirion libraries. Adafruit 6331
zł22.42
24h
Available quantity: 1
Available
Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701
zł19.91
4 weeks
No product available!
Module with a monitor of the operation of LiPo/Li-Ion batteries based on the MAX17048 system. It allows you to measure the voltage and state of charge of the battery. Adafruit 5580
zł31.18
4 weeks
No product available!
Module with a 10-channel AS7341 sensor that detects light in various wavelength ranges (color detection). It communicates via the I2C interface. Adafruit 4698
zł94.62
24h
Available quantity: 4
Available
Module with 3-axis ADXL375 accelerometer with a wide measurement range up to ±200g. The board is equipped with a STEMMA QT connector and communicates via the I2C or SPI interface. Adafruit 5374
zł127.51
4 weeks
No product available!
Module with acceleration and rotational speed sensor based on the LSM6DSOX system. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4438
zł62.04
4 weeks
No product available!
Clock signal generator with a frequency of 8 kHz to 160 MHz based on the SI5351A integrated circuit. Communication with the module takes place via the I2C bus. Adafruit 5640
zł41.21
24h
Available quantity: 5
Available
The expansion module is designed to work with the Raspberry Pi 400. The board has a 40-pin connector placed in a vertical position and a connector for RPI 400 at an angle of 45°. Adafruit 4863
zł44.46
24h
Available quantity: 2
Available
Module with BME680 for measuring the concentration of VOC, pressure, temperature and humidity. Equipped with a STEMMA QT connector, it communicates via I2C or SPI. Adafruit 3660
zł105.20
24h
Available quantity: 1
Available
Module with pressure and temperature sensor BMP280. It allows you to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Adafruit 2651
zł50.85
24h
Available quantity: 2
Available
Module with a 3-axis H3LIS331 accelerometer with a measuring range up to ± 400g. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4627
zł130.82
24h
Available quantity: 1
Available
Module with EEPROM 24LC32 memory with a capacity of 32 kBit (4 kB). Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5146
zł22.03
24h
Available quantity: 3
Available
Module with a temperature and humidity sensor based on the SHT40 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4885