STEMMA QT LTR-303 Light Sensor - module with a light sensor
ID: 1181766
5906623433629
zł28.39
Tax included
zł23.08 tax excl.
Module with light intensity sensor LTR-303. It offers a measuring range from 1 to 65535 lux and a 16-bit resolution. Communication takes place using I2C. Adafruit 5610
Description
Module with light intensity sensor LTR-303. It has a built-in 16-bit ADC converter, thanks to which the user receives a digital signal and measurement expressed in lux. It is a good replacement for photoresistors, offering greater accuracy and easier implementation in the application with a wide measuring range from 1 to 65535 lux. It provides a light measurement for both the infrared and visible + IR spectra, and the intensity of the visible light is obtained by subtracting one measurement from another. It can work with systems with a working voltage of 3.3 V or 5 V, and communication is via the I2C interface (STEMMA QT connector).
Features
- Wide range (1 to 65535 lux) and high measurement resolution (16 bits)
- Interface: I2C (address 0x29)
- Characteristics similar to the way light is perceived by the human eye
- Built-in temperature compensation
- Low power consumption mode
- Noise filtering function (50Hz / 60Hz)
- Low variance of measurements
- Interrupt output
- Resistance to IR / UV light source
- Voltage: 3.3V or 5V
- STEMMA QT connector
- Working temperature: -30 to 70 ° C
- Dimensions: 25.3 x 17.7 x 4.5 mm
Kit contains
- STEMMA QT LTR-303 Light Sensor module
- 16-pin straight male goldpin connector
1181766
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
4-wire cable with a length of 50 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4399
zł5.83
Delivery date unknown
No product available!
4-wire cable with a length of 100 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4210
zł5.29
Delivery date unknown
No product available!
4-core cable with a length of 200 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4401
zł7.50
Delivery date unknown
No product available!
zł12.73
24h
Available quantity: 11
Available
Other products in the same category (16)
DFRobot Gravity analog light intensity module for Arduino and Raspberry Pi. DFRobot DFR0026
zł11.01
24h
Available quantity: 5
Available
Sensor for detecting the distance, intensity and frequency of light (lightning) within a radius of 40 km. The module enables weather enthusiasts to measure data about local storms. DFRobot SEN0290
zł145.79
24h
Available quantity: 3
Available
A 5-channel flame detector module for detecting a flame over a larger area. Detects fire with 5 sensors that are placed on the module every 30 degrees. It has a digital and analog output. modFLAME-5CH
zł34.10
24h
Available quantity: 2
Available
This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). Pololu 2489
zł72.96
24h
Available quantity: 1
Available
Module with three optical inspection sensors (spectrophotometers) from the AS7265x series. The module consists of three sensors; AS72651, AS72652 and AS72653 which can detect wavelengths from 410nm (UV) to 940nm (IR). SparkFun SEN-15050
zł379.00
3 weeks
No product available!
he flame detector module detects the source emitting a wavelength between 760 and 1100 nm. It allows to detect, among others source of fire. Analog interface. DFRobot DFR0076
zł18.09
4 weeks
No product available!
Heart rate monitor module based on the popular MAX30101 chip. The board is equipped with connectors compliant with the Qwiic standard. SparkFun SEN-16474
zł186.38
24h
Available quantity: 1
Available
Grove module with a proximity sensor, light, color and the ability to detect gestures. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020580
zł87.58
24h
Available quantity: 5
Available
Module with an ambient light sensor VEML6030 with a measuring range up to 120,000 lx. It enables light measurement with 16-bit resolution. I2C communication. SparkFun SEN-15436
zł31.89
24h
Available quantity: 1
Available
Module with an analog light sensor. It consists of a photoresistor and a LED. Equipped with a Gravity connector. DFRobot DFR0022
zł12.56
4 weeks
No product available!
Module with an analog TEMT6000 light intensity sensor. The voltage at the output is linearly correlated with the intensity of the incident light. The module is supplied with the voltage from 3.3 to 5V. DFRobot SEN0043
zł30.53
24h
Available quantity: 2
Available
Module with a light sensor (photoresistor) designed for M5Stack sets. An analog output and a digital output have been led out on the Grove connector. M5Stack U021
zł20.32
24h
Available quantity: 2
Available
Module with an 11-channel AS7341 sensor that allows the detection of light in various wavelength ranges (color detection). It is equipped with a Gravity connector and communicates via the I2C interface. DFRobot SEN0364
zł98.17
24h
Available quantity: 2
Available
Module with light sensor - LS06-S phototransistor. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020132
zł10.22
4 weeks
No product available!
Module with slot optical sensor TCUT1600X01. The board is equipped with a Grove connector and has two digital outputs. Seeed Studio 101020587
zł56.30
24h
Available quantity: 2
Available
Module with light sensor - LS06-S phototransistor. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020173
zł21.99
24h
Available quantity: 3
Available
Module with light intensity sensor LTR-303. It offers a measuring range from 1 to 65535 lux and a 16-bit resolution. Communication takes place using I2C. Adafruit 5610