New products
New products New products
zł343.01
24h
Available
Available
Available
Available
Available
Pimoroni Tiny 2350 development board – RP2350, 4MB Flash, USB-C – PIM766
ID: 1199007
769894025833
zł57.07
Tax included
zł46.40 tax excl.
Pimoroni Tiny 2350 PIM766 is a compact board with an RP2350A microcontroller, 4 MB of flash memory and a USB-C connector, dedicated to projects requiring small dimensions. Thanks to the castellated pads it works well for PCB integration, and compatibility with MicroPython and the Qw/ST connector facilitates quick prototyping.
Description
A miniature development board with the RP2350A chip, an integrated USB-C connector and 4 MB of QSPI flash memory, intended for use in mobile projects, wearable systems and for integration with custom PCBs. Thanks to the castellated edges, it can be soldered directly onto printed circuit boards or connected using self-soldered connectors. It provides 12 GPIO lines, including 4× 12-bit ADC channels, a Qw/ST connector for connecting I2C modules, a programmable RGB LED and RESET and BOOT buttons, with the possibility of using the BOOT button as a user button. Power supply and programming are carried out via the USB-C connector. It supports C/C++ and MicroPython environments and is compatible with Raspberry Pi Pico 2 firmware.
Properties
- RP2350A chip (Dual Arm Cortex M33, up to 150 MHz, 520 KB SRAM)
- 4 MB QSPI flash memory with XiP support
- USB-C connector for power, programming and data transmission
- Programmable RGB LED
- Qw/ST connector (Qwiic/STEMMA QT) for I2C devices
- 12 GPIO pins (including 4× 12-bit ADC inputs)
- RESET and BOOT buttons (BOOT can act as a user button)
- Built-in 3.3 V regulator (maximum current output 300 mA)
- Supply voltage range: 3 V – 5.5 V
- Support for C/C++ and MicroPython
- Dimensions: 22.9 × 18 × 5.8 mm (length × width × height with USB-C port)
1199007
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 4 MB
- Number of I/O
- 12
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 22,9 mm
- Width
- 18 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
zł16.90
6 weeks
No product available!
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5128
zł264.54
4 weeks
No product available!
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5100
zł174.96
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
zł21.89
24h
Available quantity: 26
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The additional ESP8285 system allows communication in the WiFi network. Seeed Studio 102991555
zł61.34
24h
Available quantity: 1
Available
A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567
zł232.36
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM578
zł66.22
24h
Available quantity: 5
Available
Development board with RP2040 microcontroller. Equipped with a driver for DC motors, servos and Grove connectors. Dedicated to the construction of robots. Cytron MAKER-PI-RP2040
zł62.90
24h
Available quantity: 10
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-18288
zł70.41
24h
Available quantity: 4
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
zł19.90
24h
Available quantity: 63
Available
Game console based on the RP2040 microcontroller from Raspberry Pi. Equipped with a 1.54" LCD display, LiPo battery and aluminum housing. It has API support that allows you to create your own games in C++ and MicroPython. Pimoroni PIM559
zł348.98
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus
zł23.27
24h
Available quantity: 8
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus-M
zł32.40
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero
zł16.00
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero-M
zł20.39
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96
zł49.90
24h
Available quantity: 3
Available
Pimoroni Tiny 2350 PIM766 is a compact board with an RP2350A microcontroller, 4 MB of flash memory and a USB-C connector, dedicated to projects requiring small dimensions. Thanks to the castellated pads it works well for PCB integration, and compatibility with MicroPython and the Qw/ST connector facilitates quick prototyping.