RP2040-PiZero development board with RP2040 microcontroller - Waveshare 25506
ID: 1187943
5906623423958
zł42.18
Tax included
zł34.29 tax excl.
A board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores that operate at a frequency of 133 MHz and 264 kB RAM. There is also 16 MB of QSPI Flash memory on the board. The system can be programmed in C/C++ or MicroPython. It offers a DVI connector, a micorSD card slot and a 40-pin GPIO connector. The module has a shape and connector arrangement similar to the popular Raspberry Pi Zero minicomputers. Waveshare RP2040-PiZero
Description
The board is equipped with an RP2040 microcontroller designed by the Raspberry Pi Foundation. The system has two ARM Cortex M0+ cores operating at a frequency of up to 133 MHz and 264 kB of RAM. The microcontroller is not equipped with Flash memory, but the board has an external memory with a capacity of 16 MB connected via the QSPI interface.
| 1. USB typu C | 6. RP2040 |
| 2. PIO-USB Port | 7. RUN button |
| 3. DVI interface (złącze mini HDMI) | 8. BOOT button |
| 4. microSD socket | 9. LiPo connector |
| 5. RP2040 | 10. GPIO 40-pin header |
In addition to the RP2040 chip and Flash memory, the user has at their disposal a 3.3 V voltage converter, Boot and Run buttons, a DVI interface, a USB Type-C connector for powering and programming the module, and a 40-pin GPIO connector with peripherals such as 12-bit ADC, PWM inputs, I2C, SPI and UART interface. In addition, the module has a built-in LiPo/Li-Ion charger and a connector for connecting the battery.
The platform supports the popular MicroPython and C/C++ programming languages. Programs can be loaded into memory via the USB interface or via the SWD connector. A guide with examples of use is available on the product page.
Features
- RP2040 microcontroller designed by Raspberry Pi
- Two ARM Cortex-M0+ cores clocked at up to 133 MHz
- 264 kB of on-board SRAM
- DC-DC converter 3.3V 1800mA
- Built-in USB-C connector for programming and power supply
- PIO connector
- DVI interface (mini HDMI connector)
- 40-pin GPIO connector: 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x PWM
- Boot and Run buttons
- microSD card slot
- 16 MB external flash memory
- LiPo and Li-Ion charging circuit
- Battery connector
- Supported programming languages: MicroPython and C/C++
- Dimensions: 65 x 30 mm
1187943
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 16 MB
- Number of I/O
- 40
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- Yes
- Length
- 65 mm
- Width
- 30mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB type A and USB type C plugs, length 1m, white
zł7.24
Delivery date unknown
No product available!
Cable with USB type A and USB type C plugs, length 2m, white
zł7.06
Delivery date unknown
No product available!
Mini HDMI adapter with FFC connector. Designed for prototyping devices with a mini HDMI interface. Waveshare Mini HDMI Adapter Vertical
zł7.74
24h
Available quantity: 1
Available
The Akyga AK-HD-10M 1.0 m HDMI / mini HDMI cable allows you to connect multimedia devices such as cameras and camcorders to TVs and monitors, supporting Full HD image resolution and multi-channel sound. Thanks to its solid construction and compact length, the cable is resistant to mechanical damage and ideal for places with limited space
zł7.50
24h
Available quantity: 21
Available
The SanDisk High Endurance microSDHC 32GB V30 Memory Card with Adapter is a rugged and reliable storage solution designed for heavy use in harsh environments, ideal for video surveillance, drones, action cameras, professional cameras and telemetry systems, offering fast data storage and high capacity
zł79.29
Delivery date unknown
No product available!
Other products in the same category (16)
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Tiny
zł19.68
24h
Available quantity: 3
Available
A 1.28" circular IPS LCD display module with touch panel. It has a resolution of 240x240 px and is controlled by an RP2040 microcontroller. It is equipped with an accelerometer and a gyroscope. Waveshare RP2040-Touch-LCD-1.28
zł96.67
24h
Available quantity: 4
Available
Ethernet module with RP2040 microcontroller. It has an embedded CH9120 chip with an integrated TCP/IP protocol stack. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-ETH
zł54.00
24h
Available quantity: 15
Available
Board with RP2040 microcontroller and MCP2515 CAN controller. It has a built-in LiPo charging circuit and a STEMMA QT connector. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5724
zł93.95
4 weeks
No product available!
Board with RP2040 microcontroller and class D mono audio amplifier based on MAX98357 chip. It has a built-in LIS3DH three-axis accelerometer, an RGB NeoPixel LED, a LiPo charging circuit, and a STEMMA QT connector. Adafruit 5768
zł122.47
24h
Available quantity: 4
Available
Board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores and a 5x5 RGB LED matrix. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++ or MicroPython. Waveshare RP2040-Matrix
zł31.64
24h
Available quantity: 4
Available
Development board equipped with the Raspberry Pi Pico W module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the RP2040 microcontroller. Can be programmed with Arduino, MicroPython and CircuitPython. SB Components 26630
zł94.85
24h
Available quantity: 3
Available
Development board based on the RP2040 microcontroller. It is equipped with a 1.14" color LCD display and a built-in debugging tool via USB interface. The board is enclosed in a plastic housing. Waveshare RP2040-GEEK
zł44.43
4 weeks
No product available!
A board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores that operate at a frequency of 133 MHz and 264 kB RAM. There is also 16 MB of QSPI Flash memory on the board. The system can be programmed in C/C++ or MicroPython. It offers a DVI connector, a micorSD card slot and a 40-pin GPIO connector. The module has a shape and connector arrangement similar to the popular Raspberry Pi Zero minicomputers. Waveshare RP2040-PiZero
zł42.18
24h
Available quantity: 1
Available
Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM686
zł362.44
24h
Available quantity: 2
Available
Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM674
zł244.45
24h
Available quantity: 2
Available
Module with a 2.9" ePaper display and a Raspberry Pi Pico W board equipped with WiFi communication. It has a built-in Qwiic/Stemma QT connector with an I2C interface, buttons and a battery connector. Perfect as a display for a weather station. Pimoroni PIM669
zł215.19
24h
Available quantity: 1
Available
Expansion module with a Raspberry Pi Pico W board equipped with WiFi communication. The module has a built-in relay, buffer inputs, sink outputs and analog inputs. Perfect for controlling fans, pumps, solenoid valves, large motors, electronic locks or LED lighting. Pimoroni PIM652
zł169.22
4 weeks
No product available!
Module with a 1.14" IPS LCD display with a resolution of 240x135 px and a monochrome HM01B0 camera. Equipped with an RP2040 microcontroller. Waveshare PICO-Cam-A
zł81.73
4 weeks
No product available!
Module with a round 1.28" IPS LCD touch display with a resolution of 240x240 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-Touch-LCD-1.28-B
zł121.67
24h
Available quantity: 3
Available
Module with a round 1.28" IPS LCD display with a resolution of 240x240 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-LCD-1.28-B
zł93.97
24h
Available quantity: 3
Available
A board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores that operate at a frequency of 133 MHz and 264 kB RAM. There is also 16 MB of QSPI Flash memory on the board. The system can be programmed in C/C++ or MicroPython. It offers a DVI connector, a micorSD card slot and a 40-pin GPIO connector. The module has a shape and connector arrangement similar to the popular Raspberry Pi Zero minicomputers. Waveshare RP2040-PiZero