RP2350-Touch-AMOLED-1.8
search
  • RP2350-Touch-AMOLED-1.8
  • RP2350-Touch-AMOLED-1.8
  • RP2350-Touch-AMOLED-1.8
  • RP2350-Touch-AMOLED-1.8
ID: 1198965
5902186322783
zł129.36
Tax included

zł105.17 tax excl.

RP2350-Touch-AMOLED-1.8 with battery is an advanced development board with an AMOLED display, touch support, motion sensors, audio, and a wide range of interfaces. Designed for mobile and embedded applications, it enables the creation of compact interactive devices with full open-source support.

24h
Available
Available quantity: 4
Kamami is the official distributor of Waveshare displays, accessories and modules.

Description

RP2350-Touch-AMOLED-1.8 is a compact development board equipped with a 1.8-inch AMOLED display with a resolution of 368 × 448 pixels, a capacitive touch panel, and a 3.7 V MX1.25 lithium-ion battery. The integrated RP2350A microcontroller with a unique dual architecture (ARM Cortex-M33 and Hazard3 RISC-V) enables a flexible approach to embedded system design. The module also includes a 6-axis sensor (QMI8658), RTC, 16 MB Flash memory, ES8311 audio codec, NS4150B amplifier, microphone, speaker, and microSD card reader.

The built-in SH8601 controller drives the display via QSPI, while the FT3168 manages touch communication via I2C. Power supply and programming are provided through a USB Type-C connector. The enclosure with a cover allows integration into mobile projects, and support for C/C++, MicroPython, and Arduino IDE facilitates application development.

Properties

  • Microcontroller: RP2350A, dual-core ARM Cortex-M33 or Hazard3 RISC-V, up to 150 MHz
  • Memory: 520 KB SRAM, 16 MB NOR Flash
  • Display: AMOLED 1.8" 368×448, 16.7M colors, SH8601 driver
  • Touch panel: FT3168, I2C interface
  • IMU sensor: QMI8658 (3-axis accelerometer and 3-axis gyroscope)
  • RTC: PCF85063
  • Audio: ES8311 codec, NS4150B amplifier, microphone, and speaker
  • Power supply: USB-C or integrated 3.7 V MX1.25 battery (3.85 × 24 × 28 mm)
  • microSD support
  • Interfaces: 2× I2C, 1× UART, 1× ADC (12-bit), 5× PWM, 5× GPIO, 12× PIO
  • Low-power and sleep modes supported
  • Programming: drag-and-drop via USB, support for C/C++, MicroPython, Arduino IDE
  • Dedicated enclosure with battery slot and removable cover
  • Dimensions: 45.20 × 37.60 × 15.00 mm

Included in the set

  • RP2350-Touch-AMOLED-1.8 (battery version) ×1
  • 3.7 V MX1.25 lithium-ion battery ×1
1198965

Data sheet

Microcontroller
RP2350
Flash memory
16 MB
Number of I/O
22
Ethernet
none
WiFi/BT module
No
Bluetooth module
No
MicroSD slot
Yes
Length
45,2 mm
Width
37,6 mm
USB connector type
USB type C

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Other products in the same category (16)