RP2350 development board with 1.43″ AMOLED display 466×466 and enclosure - Waveshare 30737
ID: 1197737
5902186305274
zł132.27
Tax included
zł107.54 tax excl.
RP2350-Touch-AMOLED-1.43-B is a compact development board with an AMOLED display and capacitive touch, enclosed in a robust CNC-machined case. Integrated sensors and interfaces offer extensive expansion and application possibilities in HMI projects, wearable electronics, and smart control systems. Support for C/C++, MicroPython, and Arduino IDE, along with rich SDK resources, facilitates rapid project deployment.
Description
Integrated development board featuring the RP2350 chip, a 466×466 pixel AMOLED display with a capacitive touch panel, enclosed in a precisely crafted CNC case. The device is equipped with a rich set of peripherals such as RTC, a 6-axis motion sensor (accelerometer + gyroscope), TF card slot, and lithium battery connector. The dual-core Cortex-M33 and Hazard3 RISC-V architecture, clocked up to 150 MHz, allows smooth handling of user interfaces based on LVGL. Designed for rapid prototyping of HMI applications in a compact format.
Features
- RP2350 chip: 2× ARM Cortex-M33 and 2× Hazard3 RISC-V cores, up to 150 MHz
- Memory: 520 KB SRAM, 16 MB NOR Flash (W25Q128JVSIQ)
- 1.43" AMOLED display, 466×466 px, 16.7M colors, SPI, C05300 controller
- Capacitive touch: FT6146, I2C interface, interrupt support
- QMI8658 sensor: 6-axis IMU (3× accelerometer, 3× gyroscope)
- RTC: PCF85063, with connector for rechargeable RTC battery
- 3.7 V battery connector (MX1.25, charge/discharge support)
- TF card slot on bottom side of PCB
- USB Type-C port for power and programming
- UART and I2C connectors: SH1.0 (4-pin)
- Reserved GPIO headers: 2× 14 PIN, 1.27 mm pitch
- BOOT and RESET buttons, power and charging indicators
- CNC enclosure with color marking on the back
Included
- RP2350-Touch-AMOLED-1.43-B x1
- SH1.0 4PIN cable (~100 mm) x2
1197737
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 16 MB
- Number of I/O
- 02
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- Yes
- Length
- 48mm
- Width
- 48 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The board with the RP2040 microcontroller, which provides a set of 2x20-pin connectors to which you can connect the HATs of the Raspberry Pi. SB Components 24032
zł71.19
24h
Available quantity: 2
Available
This RP2040-based evaluation board features an embedded W5500 Ethernet controller, providing hardware-based TCP/IP support without burdening the microcontroller. Its compact design, PoE support, and Raspberry Pi Pico-compatible interfaces make it ideal for IoT, automation, and networking projects. WIZnet W5500-EVB-Pico-POE
zł64.89
5 weeks
No product available!
RP2350-Touch-LCD-2.8 is a versatile development platform with a touchscreen and audio functions, designed for projects involving user interfaces, audio playback, motion tracking, and remote communication. It combines the processing power of the RP2350 with a rich set of peripherals and low power consumption, making it ideal for portable, educational, and HMI applications.
zł107.78
24h
Available quantity: 3
Available
Evaluation board with a Raspberry Pi RP2040 microcontroller and a TCP/IP W5500 controller. WIZnet W5500-EVB-PICO
zł55.74
24h
Available quantity: 38
Available
RP2350-USB-A is a versatile development board based on the modern RP2350A microcontroller with a unique dual-core architecture: Arm Cortex-M33 + RISC-V. Thanks to the USB Type-A port supported via PIO, a wide range of interfaces, and a compact form factor, the board is ideal for prototyping peripheral devices, learning programming, and integrating into custom projects as an SMD module.
zł25.37
24h
Available quantity: 26
Available
Ethernet module with RP2040 microcontroller. It has an embedded CH9120 chip with an integrated TCP/IP protocol stack. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-ETH
zł54.59
Delivery date unknown
No product available!
A board with an RP2040 microcontroller and a radio module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and a STEMMA QT connector. Adafruit 5712
zł121.44
24h
Available quantity: 4
Available
The RP2040 MCU board combines the high performance of two ARM Cortex M0+ cores clocked at up to 133 MHz, with 264 KB of SRAM, 2 MB of Flash, and integrated Bluetooth 5.1 for easy wireless communication. With simple programming, multiple GPIO interfaces, and support for C/C++, MicroPython, and Arduino, the board is ideal for IoT projects and other advanced applications. Waveshare RP2040-BLE
zł30.25
24h
Available quantity: 2
Available
RP2350-GEEK is an advanced diagnostic and development platform for electronics designers. It enables convenient debugging of ARM microcontrollers, testing of I2C and UART peripherals, and data visualization on a color display. Thanks to its compact enclosure and set of interfaces, it is an excellent tool for learning, prototyping, and embedded project development.
zł48.54
24h
Available quantity: 2
Available
Module with a 2.9" ePaper display and a Raspberry Pi Pico W board equipped with WiFi communication. It has a built-in Qwiic/Stemma QT connector with an I2C interface, buttons and a battery connector. Perfect as a display for a weather station. Pimoroni PIM669
zł215.19
24h
Available quantity: 4
Available
Development board equipped with the Raspberry Pi Pico W module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the RP2040 microcontroller. Can be programmed with Arduino, MicroPython and CircuitPython. SB Components 26630
zł94.85
24h
Available quantity: 3
Available
USB RTC module based on Raspberry Pi RP2040 microcontroller. It combines MicroSD card slot, LCD display and CR1220 battery holder. SB Components SKU25138
zł296.82
24h
Available quantity: 3
Available
RP2350-Touch-AMOLED-1.8 with battery is an advanced development board with an AMOLED display, touch support, motion sensors, audio, and a wide range of interfaces. Designed for mobile and embedded applications, it enables the creation of compact interactive devices with full open-source support.
zł129.36
24h
Available quantity: 4
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96-M
zł62.75
24h
Available quantity: 4
Available
Miniature KAmod RP2040 module with Raspberry RP2040 microcontroller and 16 MB flash memory provides high computing performance in a compact format. Suitable for educational, hobbyist, and prototyping applications of devices with USB, I2C, SPI, and UART communication.
zł22.21
24h
Available quantity: 126
Available
A 1.28" circular IPS LCD display module with touch panel. It has a resolution of 240x240 px and is controlled by an RP2040 microcontroller. It is equipped with an accelerometer and a gyroscope. Waveshare RP2040-Touch-LCD-1.28
zł96.67
24h
Available quantity: 5
Available
RP2350-Touch-AMOLED-1.43-B is a compact development board with an AMOLED display and capacitive touch, enclosed in a robust CNC-machined case. Integrated sensors and interfaces offer extensive expansion and application possibilities in HMI projects, wearable electronics, and smart control systems. Support for C/C++, MicroPython, and Arduino IDE, along with rich SDK resources, facilitates rapid project deployment.