RP2040-Touch-LCD-1.28 module with 1.28" 240x240 LCD IPS touch panel and RP2040 microcontroller - Waveshare 24580
ID: 1185250
5906623427581
zł107.10
Tax included
zł87.07 tax excl.
A 1.28" circular IPS LCD display module with touch panel. It has a resolution of 240x240 px and is controlled by an RP2040 microcontroller. It is equipped with an accelerometer and a gyroscope. Waveshare RP2040-Touch-LCD-1.28
Description
A module with a 1.28" circular colour IPS LCD display with touch panel. It has a resolution of 240x240 pixels and is controlled by the RP2040 chip. The microcontroller has two ARM Cortex M0+ cores running at up to 133 MHz and 264 kB of RAM. It is not equipped with flash memory, but there is a 2MB external memory connected via the QSPI interface on the board.
| 1. USB type C | 5. RP2040 |
| 2. ETA6096 | 6. IMU QMI8658 |
| 3. RT9013-33GB | 7. BOOT button |
| 4. 16MB NOR-Flash | 8. RESET button |
| 9. MX1.25 battery connector |
The display used has an on-board GC9A01A controller, which performs communication via an SPI interface. It can display content in a full 65K colour gamut. In addition, the user has the QMI8658C 6-axis IMU, which combines an accelerometer and gyroscope, a lithium battery charger and GPIO pinout connectors.
The RP2040 microcontroller is programmed via a USB Type C connector and supports the popular MicroPython and C/C++ programming languages. The module will find use in small IoT projects and in building your own watch. Full documentation and example programs are available on the product page.
Features
- RP2040 microcontroller
- Two ARM Cortex-M0+ cores clocked at up to 133 MHz
- 264 kB of on-board SRAM
- 16 MB external QSPI flash memory
- Display type: LCD IPS
- Diameter 1.28"
- Touch panel
- Resolution: 240x240 px
- Interface: SPI
- Dot size: 0.135 x 0.135 mm
- Display colour: RGB 65K
- Wide viewing angle
- Display driver GC9A01
- QMI8658C 6-axis IMU
- Lithium battery charger
- Dimensions: 39.49 x 26.52
Kit contains
- RP2040-Touch-LCD-1.28
- SH1.0 12-pin cable
1185250
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 16 MB
- Number of I/O
- None
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 39,49 mm
- Width
- 26,52 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 582
Available
Module with a round 1.28" IPS LCD display with a resolution of 240x240 px and RP2040 microcontroller. Equipped with an accelerometer and a gyroscope. Waveshare RP2040-LCD-1.28
zł77.05
24h
Available quantity: 11
Available
Other products in the same category (16)
MicroMod main module with RP2040 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-17720
zł77.32
24h
Available quantity: 2
Available
Board with RP2040 microcontroller and class D mono audio amplifier based on MAX98357 chip. It has a built-in LIS3DH three-axis accelerometer, an RGB NeoPixel LED, a LiPo charging circuit, and a STEMMA QT connector. Adafruit 5768
zł122.47
24h
Available quantity: 7
Available
Development board equipped with the Raspberry Pi Pico W module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the RP2040 microcontroller. Can be programmed with Arduino, MicroPython and CircuitPython. SB Components 26630
zł94.85
24h
Available quantity: 3
Available
RP2350-Touch-LCD-2.8 is a versatile development platform with a touchscreen and audio functions, designed for projects involving user interfaces, audio playback, motion tracking, and remote communication. It combines the processing power of the RP2350 with a rich set of peripherals and low power consumption, making it ideal for portable, educational, and HMI applications.
zł107.78
24h
Available quantity: 4
Available
Board with the RP2040 microcontroller in the form of a USB dongle. Equipped with edge connectors, RGB LED, boot and reset button. Waveshare RP2040-One
zł23.11
24h
Available quantity: 9
Available
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM607
zł130.07
24h
Available quantity: 11
Available
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
zł138.13
4 weeks
No product available!
Board with RP2040 microcontroller and HDMI video connector. Has a built-in LiPo charging circuit and STEMMA QT connector. Allows the use of the Feather module to display data on a monitor. Adafruit 5710
zł85.77
24h
Available quantity: 4
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. It comes with a USB adapter. Waveshare RP2040-Tiny-Kit
zł26.27
24h
Available quantity: 7
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero
zł14.81
24h
Available quantity: 17
Available
Game console based on the RP2040 microcontroller from Raspberry Pi. Equipped with a 1.54" LCD display, LiPo battery and aluminum housing. It has API support that allows you to create your own games in C++ and MicroPython. Pimoroni PIM559
zł348.98
4 weeks
No product available!
Waveshare RP2350-One is a compact development board featuring the RP2350A microcontroller with dual-core architecture: Arm Cortex-M33 and RISC-V. It offers a rich set of peripherals and 4 MB of Flash memory. With a direct USB Type-A connector, support for C/C++ and MicroPython, and SMT mounting capability, it is ideal for modern embedded applications, automation, and technical education.
zł24.17
24h
Available quantity: 9
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 4900
zł54.67
24h
Available quantity: 1
Available
RP2350-USB-A is a versatile development board based on the modern RP2350A microcontroller with a unique dual-core architecture: Arm Cortex-M33 + RISC-V. Thanks to the USB Type-A port supported via PIO, a wide range of interfaces, and a compact form factor, the board is ideal for prototyping peripheral devices, learning programming, and integrating into custom projects as an SMD module.
zł23.85
24h
Available quantity: 11
Available
Board with RP2040 microcontroller equipped with two ARM Cortex-M0+ 133 MHz cores, 264 kB RAM. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++, CircuitPython or MicroPython. SB Components 26531
zł30.50
24h
Available quantity: 3
Available
A board with an RP2040 microcontroller and a radio module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and a STEMMA QT connector. Adafruit 5712
zł121.44
24h
Available quantity: 5
Available
A 1.28" circular IPS LCD display module with touch panel. It has a resolution of 240x240 px and is controlled by an RP2040 microcontroller. It is equipped with an accelerometer and a gyroscope. Waveshare RP2040-Touch-LCD-1.28