RP2350 development board with 1.43″ AMOLED display 466×466 - Waveshare 30735
ID: 1197736
5902186305267
zł112.18
Tax included
zł91.20 tax excl.
RP2350-Touch-AMOLED-1.43 is a high-performance platform for building modern user interfaces in mobile, wearable, and control system projects. The high-contrast AMOLED display and capacitive touch, combined with an IMU sensor and RTC, provide a comprehensive development environment for applications requiring advanced interaction and mobility.
Description
RP2350-Touch-AMOLED-1.43 is a compact development board based on the RP2350 microcontroller with a dual-core ARM Cortex-M33 and Hazard3 RISC-V architecture, designed for HMI projects. It features a 1.43-inch AMOLED display with a resolution of 466×466 pixels, a capacitive touch panel controlled via I2C, and a set of integrated peripherals: RTC, 6-axis IMU sensor, TF card slot, and lithium battery connector. With support for C/C++, MicroPython, and Arduino IDE, it enables rapid development of user applications.
Features
- Microcontroller: RP2350 – 2× Cortex-M33 + 2× Hazard3 RISC-V, up to 150 MHz
- Memory: 520 KB SRAM, 16 MB NOR Flash (W25Q128JVSIQ)
- AMOLED display: 1.43", 466×466 px, SPI, 16.7M colors
- Touch: capacitive, FT6146, I2C interface, interrupt support
- Sensor: QMI8658 – accelerometer and gyroscope (3+3 axes)
- RTC: PCF85063, SH1.0 connector for rechargeable battery
- 3.7 V battery connector: MX1.25 (charging/discharging supported)
- TF card slot (back of PCB), power and charging indicators
- USB Type-C port for power, debugging, and programming
- UART and I2C connectors: SH1.0, 4-pin
- Reserved GPIO headers: 2× 14 PIN, 1.27 mm pitch
- BOOT and RESET buttons, chips: ETA6098 (charging), MP1605GTF-Z (DC/DC)
Included
- RP2350-Touch-AMOLED-1.43 x1
- SH1.0 4PIN cable (~100 mm) x2
1197736
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 16 MB
- Number of I/O
- 28
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 46mm
- Width
- 46mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Base board with soldered Raspberry Pi Pico module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI
zł68.11
24h
Available quantity: 10
Available
Ethernet module with RP2040 microcontroller. It has an embedded CH9120 chip with an integrated TCP/IP protocol stack. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-ETH
zł54.59
24h
Available quantity: 3
Available
Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM674
zł244.45
24h
Available quantity: 2
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores that operate at 133 MHz. It has 264 kB of RAM, and the board also includes 16 MB of QSPI Flash memory. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus-16MB
zł27.64
24h
Available quantity: 5
Available
Servo driver based on the Raspberry Pi RP2040 microcontroller. It allows you to control up to 18 servos, has 6 analog inputs and a QW/ST connector for connecting additional sensors. Pimoroni PIM613
zł176.97
24h
Available quantity: 3
Available
Evaluation board with a Raspberry Pi RP2040 microcontroller and a TCP/IP W5500 controller. WIZnet W5500-EVB-PICO
zł55.74
24h
Available quantity: 54
Available
A board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores that operate at a frequency of 133 MHz and 264 kB RAM. There is also 16 MB of QSPI Flash memory on the board. The system can be programmed in C/C++ or MicroPython. It offers a DVI connector, a micorSD card slot and a 40-pin GPIO connector. The module has a shape and connector arrangement similar to the popular Raspberry Pi Zero minicomputers. Waveshare RP2040-PiZero
zł42.18
24h
Available quantity: 2
Available
Board with RP2040 microcontroller and class D mono audio amplifier based on MAX98357 chip. It has a built-in LIS3DH three-axis accelerometer, an RGB NeoPixel LED, a LiPo charging circuit, and a STEMMA QT connector. Adafruit 5768
zł122.47
24h
Available quantity: 7
Available
Development board with RP2040 microcontroller. Equipped with a driver for DC motors, servos and Grove connectors. Dedicated to the construction of robots. Cytron MAKER-PI-RP2040
zł62.90
24h
Available quantity: 11
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
zł19.90
24h
Available quantity: 65
Available
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM624
zł143.18
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero
zł14.97
24h
Available quantity: 25
Available
RP2040-Touch-LCD-1.69 is a high-performance, integrated MCU board designed for interactive device developers. With a touch display, 6-axis sensor, RTC, and power management, it is suitable for HMI systems, mobile devices, data loggers, and IoT solutions. Support for MicroPython and Arduino facilitates rapid prototyping and deployment.
zł96.83
24h
Available quantity: 3
Available
Development board equipped with the Raspberry Pi Pico W module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the RP2040 microcontroller. Can be programmed with Arduino, MicroPython and CircuitPython. SB Components 26630
zł94.85
24h
Available quantity: 3
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus
zł23.27
24h
Available quantity: 10
Available
The RP2350-ETH development module combines the computing power of a dual-architecture microcontroller with Ethernet support, enabling the creation of compact and integrated network applications. Dedicated to projects utilizing TCP/IP transmission, it provides support for C/C++, MicroPython, and Arduino languages as well as a wide range of development resources. Thanks to its open architecture and compact form, it is suitable for IoT applications, communication gateways, and embedded systems requiring fast access to a local network.
zł54.93
24h
Available quantity: 4
Available
RP2350-Touch-AMOLED-1.43 is a high-performance platform for building modern user interfaces in mobile, wearable, and control system projects. The high-contrast AMOLED display and capacitive touch, combined with an IMU sensor and RTC, provide a comprehensive development environment for applications requiring advanced interaction and mobility.