RP2350-Touch-LCD-2.8C - development board with RP2350 microcontroller and 2.8" display
ID: 1199755
5902186332935
zł170.12
Tax included
zł138.31 tax excl.
This Raspberry Pi RP2350B microcontroller development board features a dual-core ARM Cortex-M33 or Hazard3 RISC-V processor. It features a 2.8-inch 480x480 circular IPS display with a capacitive touchscreen and LVGL support. It includes 16MB of flash memory, a real-time clock, a 6-axis motion sensor, a microSD slot, and a lithium battery connector. It's ideal for HMI, IoT, and smart wearable device projects. Waveshare RP2350-Touch-LCD-2.8C
Description
The RP2350 2.8″ Round Display development board is a modern and versatile solution based on the Raspberry Pi RP2350B microcontroller with a unique dual-core, dual-architecture design. It allows switching between ARM Cortex-M33 and Hazard3 RISC-V cores, providing developers with flexibility and freedom to experiment in a stable environment. The board features a 2.8-inch round IPS display with a 480×480 pixel resolution, delivering excellent image quality, a wide 160° viewing angle, and smooth operation of graphical interfaces such as LVGL. The capacitive touch screen supports the I2C interface and offers high touch precision, ensuring intuitive operation for HMI applications. The board includes 16 MB of onboard Flash memory and 520 KB of SRAM, expandable with an external PSRAM chip. It also integrates a micro SD card slot, a USB 1.1 interface (host/device), and a lithium battery charging connector, making it suitable for portable applications.
| 1. RP2350B Chip | 12. USB Type-C Connector |
| 2. 16MB Flash Memory | 13. ME6217C33M5G Regulator |
| 3. PSRAM Solder Pads | 14. Charging Indicator |
| 4. Micro SD Card Slot | 15. ON/OFF Power Switch |
| 5. RTC Battery Connector | 16. RESET Button |
| 6. PCF85063 (RTC) Chip | 17. BOOT Button |
| 7. I2C Connector | 18. MX1.25 Battery Connector |
| 8. UART Connector | 19. ETA6096 Chip |
| 9. Buzzer | 20. QST Position Sensor |
| 10. PIO-USB Type-C Port | 21. 12-pin Connector |
| 11. USB Type-C Connector | — |
The integrated QMI8658 6-axis motion sensor enables motion and orientation detection, while the PCF85063 RTC ensures precise timekeeping. Thanks to its low-power modes, the board is ideal for portable and energy-efficient embedded systems. It supports programming in C/C++, MicroPython, and Arduino IDE, with a rich set of SDKs, libraries, and examples available to simplify development. The board integrates multiple communication interfaces, including GPIO, UART, and I2C, for connecting external modules and sensors. The ST7701 display controller ensures smooth and stable screen operation. The RP2350 2.8″ Round Display Development Board is an excellent choice for developers building HMI systems, smartwatches, intelligent devices, or IoT projects seeking a reliable and powerful development platform.
Features
- Microcontroller: Raspberry Pi RP2350B
- Architecture: dual-core, dual-architecture (ARM Cortex-M33 / Hazard3 RISC-V)
- Clock frequency: up to 150 MHz
- Memory: 520KB SRAM + 16MB Flash (expandable with PSRAM)
- Display: 2.8″ IPS, 480×480 pixels, contrast ratio 1200:1
- Display interface: RGB
- Display driver: ST7701
- Touchscreen: capacitive, I2C interface, GT911 controller
- Motion sensor: QMI8658 6-axis IMU
- Real-time clock: PCF85063 RTC
- Micro SD card slot
- Battery connector
- USB interface: USB 1.1 (host/device)
- Operating modes: low power consumption, sleep mode
- Programming: C/C++, MicroPython, Arduino IDE
- Additional features: buzzer, precise clock and timer, temperature sensor
- Supported graphic libraries: LVGL and other GUI frameworks
- Communication interfaces: GPIO, UART, I2C
- Dimensions: 95.86 × 95.86 mm
Kit contains
- RP2350 2.8″ Round Display
- SH1.0 12PIN cable (~100 mm)
- 2 × SH1.0 4PIN cables (~100 mm)
1199755
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 16 MB
- Number of I/O
- 12
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- Yes
- Length
- 95 mm
- Width
- 95 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
zł4.26
24h
Available quantity: 58
Available
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.08
24h
Available quantity: 30
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
24h
Available quantity: 66
Available
Other products in the same category (16)
The first microcontroller designed by the Raspberry Pi foundation, equipped with two ARM Cortex M0 + cores clocked at 133 MHz, 264 KB of RAM and 30 ports with I2C, SPI, UART and USB interfaces. External flash memory can be connected via the QSPI interface. The system can be programmed in C / C ++ or microPython. Raspberry Pi SC0908
zł4.19
24h
Available quantity: 370
Available
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00052
zł139.00
24h
Available quantity: 19
Available
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00053
zł159.00
24h
Available quantity: 12
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 4900
zł52.15
24h
Available quantity: 1
Available
The board with the RP2040 microcontroller in the form of a USB dongle. Equipped with Stemma QT connector, RGB NeoPixel diode, boot and reset button. Adafruit 5056
zł45.34
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
zł16.90
6 weeks
No product available!
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5128
zł264.54
4 weeks
No product available!
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5100
zł174.96
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
zł21.89
24h
Available quantity: 36
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The additional ESP8285 system allows communication in the WiFi network. Seeed Studio 102991555
zł61.34
24h
Available quantity: 1
Available
A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567
zł232.36
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM578
zł66.22
24h
Available quantity: 5
Available
Development board with RP2040 microcontroller. Equipped with a driver for DC motors, servos and Grove connectors. Dedicated to the construction of robots. Cytron MAKER-PI-RP2040
zł62.90
24h
Available quantity: 10
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-18288
zł70.41
24h
Available quantity: 4
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
zł19.90
24h
Available quantity: 63
Available
Game console based on the RP2040 microcontroller from Raspberry Pi. Equipped with a 1.54" LCD display, LiPo battery and aluminum housing. It has API support that allows you to create your own games in C++ and MicroPython. Pimoroni PIM559
zł348.98
4 weeks
No product available!
This Raspberry Pi RP2350B microcontroller development board features a dual-core ARM Cortex-M33 or Hazard3 RISC-V processor. It features a 2.8-inch 480x480 circular IPS display with a capacitive touchscreen and LVGL support. It includes 16MB of flash memory, a real-time clock, a 6-axis motion sensor, a microSD slot, and a lithium battery connector. It's ideal for HMI, IoT, and smart wearable device projects. Waveshare RP2350-Touch-LCD-2.8C