zł43.61 tax excl.
Waveshare RP2350-CAN is a compact development board with CAN bus support, featuring the RP2350A microcontroller with a dual Arm/RISC-V architecture. It is used in communication systems, industrial automation, and as an educational platform, offering full compatibility with Raspberry Pi Pico.
The RP2350-CAN is a Pico-style development board based on the Raspberry Pi RP2350A microcontroller, featuring a unique dual-core architecture: Arm Cortex-M33 and Hazard 3 RISC-V. Operating at up to 150 MHz, it offers a rich set of communication interfaces and high flexibility for industrial, communication, and educational applications. The board includes an onboard XL2515 CAN bus controller with a SIT65HVD230 transceiver and a screw terminal for direct CAN network connection. Power and programming are provided via a USB Type-C connector, with support for C/C++ and MicroPython development.
The board is compatible with most Raspberry Pi Pico modules and features 26 configurable GPIO pins.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
A set of 50 MF wires in various colors, 20 cm long, with insulated terminals
No product available!
Debugger/programmer with a USB interface that supports the SWD (Serial Wire Debbug) programming interface. It is based on CMSIS-DAP (Coresight Debug Access Port) and also has a USB-UART converter function
The 1 meter USB-C M/M 2.0 cable from Lanberg is a practical and effective solution for fast and stable connection of devices with the USB type C interface. The half-meter cable, finished in an elegant black colour, is perfect for offices, homes and travel. Lanberg CA-CMCM-10CU-0010-BK
KAmod ProtoSupply is a universal, USB-C powered breadboard power supply module that offers two independent voltage outputs – the first adjustable (from 2.5 to 10.5 V or fixed at 3.3 V, 5 V, 9 V) and the second with 5 V or 12.5 V options – equipped with overload, overheat and short circuit protections and adapted to standard power rail layouts
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96-M
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 5302
Mini board with RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Pimoroni SP011
No product available!
Board with RP2040 microcontroller and W5100S network chip. The module is equipped with an Ethernet connector. WIZnet W5100S-EVB-Pico
Development board equipped with RP2040 microcontroller, RGB LED diodes, buzzer and Qwiic/STEMMA QT connectors. Pin spacing compatible with Arduino Nano. Cytron MAKER-NANO-RP2040
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores. The board also has 4 MB of QSPI flash memory. 1.14" LCD module. TTGO T-Display RP2040
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM607
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM610
Development board with RP2040 microcontroller. Equipped with a microBUS connector, it can work with Qwiic expansion boards. SprakFun DEV-18721
Servo driver based on the Raspberry Pi RP2040 microcontroller. It allows you to control up to 18 servos, has 6 analog inputs and a QW/ST connector for connecting additional sensors. Pimoroni PIM613
Development board with RP2040 and ESP-12E microcontroller. Equipped with 0.91" OLED display. SB Components 24186
The board with the RP2040 microcontroller, which provides a set of 2x20-pin connectors to which you can connect the HATs of the Raspberry Pi. SB Components 24032
Module with round 1.28" IPS LCD display and 240x240 px resolution and RP2040 chip. SB Components 24018
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity. Raspberry Pi SC0918
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity. Version with soldered connectors. Raspberry Pi SC0919
Waveshare RP2350-CAN is a compact development board with CAN bus support, featuring the RP2350A microcontroller with a dual Arm/RISC-V architecture. It is used in communication systems, industrial automation, and as an educational platform, offering full compatibility with Raspberry Pi Pico.