RP2350 MCU board with 1.28″ round LCD 240×240 and enclosure - Waveshare 28987
ID: 1197466
5902186307339
zł84.01
Tax included
zł68.30 tax excl.
RP2350-LCD-1.28-B is a highly integrated development platform with a display, designed for applications requiring low power consumption and high flexibility in interface design. Thanks to its robust CNC enclosure and support for two processor architectures, the module is perfectly suited for use in portable systems, HMI devices, and intelligent embedded projects.
Description
RP2350-LCD-1.28-B is a compact development module equipped with a 1.28-inch color IPS screen with a resolution of 240×240 pixels, enclosed in a durable CNC-machined aluminum housing with a matte acrylic bottom cover. Based on the RP2350 microcontroller, the device combines two ARM Cortex-M33 cores and two Hazard3 RISC-V cores, allowing parallel application development for both architectures.
The board features 4 MB Flash memory, 520 KB SRAM, an IMU sensor (accelerometer + gyroscope), a Li-Ion battery charging management chip, and a USB 1.1 interface with drag-and-drop programming capability. All GPIO lines are accessible through a 30-pin female header with a 1.27 mm pitch, supporting multifunctional pin configurations.
Features
- Microcontroller: RP2350 – 2× ARM Cortex-M33 + 2× Hazard3 RISC-V, up to 150 MHz
- Memory: 520 KB SRAM, 4 MB NOR Flash (P25Q32SH-UXH-IR)
- Display: IPS 1.28”, 240×240, 65K colors (non-touch)
- Sensors: QMI8658 (6DOF IMU), temperature sensor
- Interfaces: USB 1.1, 2× SPI, 2× I2C, 2× UART, 4× 12-bit ADC, 24× PWM
- 12 PIO state machines for custom peripheral interfaces
- Power supply: USB Type-C, MX1.25 connector (3.7 V Li-Ion battery)
- Low-power, sleep, and standby modes
- All GPIO and debug pins accessible via 1.27 mm header
- Enclosure: CNC aluminum with matte acrylic bottom cover
- Language support: C/C++, MicroPython
1197466
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 4 MB
- Number of I/O
- 30
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 48mm
- Width
- 48 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
zł138.13
4 weeks
No product available!
Mini board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz and 264 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM558
zł55.35
24h
Available quantity: 5
Available
The first microcontroller designed by the Raspberry Pi foundation, equipped with two ARM Cortex M0 + cores clocked at 133 MHz, 264 KB of RAM and 30 ports with I2C, SPI, UART and USB interfaces. External flash memory can be connected via the QSPI interface. The system can be programmed in C / C ++ or microPython. Raspberry Pi SC0908
zł4.19
24h
Available quantity: 397
Available
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00052
zł139.00
24h
Available quantity: 21
Available
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00053
zł159.00
24h
Available quantity: 14
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 4900
zł51.49
4 weeks
No product available!
The board with the RP2040 microcontroller in the form of a USB dongle. Equipped with Stemma QT connector, RGB NeoPixel diode, boot and reset button. Adafruit 5056
zł45.37
24h
Available quantity: 1
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
zł16.90
6 weeks
No product available!
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5128
zł264.54
4 weeks
No product available!
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5100
zł170.90
24h
Available quantity: 1
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
zł21.89
24h
Available quantity: 70
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The additional ESP8285 system allows communication in the WiFi network. Seeed Studio 102991555
zł61.34
24h
Available quantity: 1
Available
A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567
zł232.36
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM578
zł66.22
24h
Available quantity: 6
Available
Development board with RP2040 microcontroller. Equipped with a driver for DC motors, servos and Grove connectors. Dedicated to the construction of robots. Cytron MAKER-PI-RP2040
zł62.90
24h
Available quantity: 11
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-18288
zł70.41
24h
Available quantity: 4
Available
RP2350-LCD-1.28-B is a highly integrated development platform with a display, designed for applications requiring low power consumption and high flexibility in interface design. Thanks to its robust CNC enclosure and support for two processor architectures, the module is perfectly suited for use in portable systems, HMI devices, and intelligent embedded projects.