ArduCAM Pico4ML-Pro TinyML RP2040 Dev Kit - 4-channel camera adapter with RP2040 microcontroller
ID: 1190077
5906623404858
zł149.00
Tax included
zł121.14 tax excl.
Camera adapter based on Raspberry RP2040, dedicated to TinyML development. is equipped with a 2.4-inch LCD screen, microphone, camera connectors and an IMU module. It allows you to take photos, use WiFi, SD card and USB mass storage. ArduCam B0432
Description
An adapter for cameras based on Raspberry RP2040, dedicated to TinyML development. Equipped with all-in-one software, providing access to all examples without the need for reprogramming. This allows immediate testing of predefined examples such as person detection, keyword recognition, and Magic Wand.
The adapter features a 2.4-inch LCD screen, microphone, camera connectors, and IMU module. It enables photo capturing, WiFi usage, SD card, and USB mass storage. It supports connection to four Arducam Mega cameras simultaneously, allowing both live streaming and photo capture. It supports audio input/output, face recognition, and user interface. Pico4ML Pro enables smoother deployment and expansion of various projects. The kit supports gesture detection, keyword recognition, and most importantly, the Magic Wand feature.
Features
- RP2040 microcontroller
- Clock frequency: 133 MHz
- Flash memory: 2 MB
- SRAM: 264 KB
- USB 1.1 controller and PHY with host and device support
- Camera interface: 4 SPI interfaces for Mega cameras and 1 single-wire camera for HM01B0
- SD card slot support
- LCD support
- IMU support
- Microphone support
- Wi-Fi
- Power supply voltage: 5 V
Kit contains
- Pico4ML Pro TinyML development kit
- 4 x 6-pin 150 mm cables
- Acrylic case and screws
1190077
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 2 MB
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- No
- MicroSD slot
- Yes
- USB connector type
- microUSB type B
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Camera module designed for RP2040 development boards. It uses the Himax HM01B0 sensor to achieve excellent performance in low light. ArduCAM B328
Regular pricezł60.73zł45.76
24h
Available quantity: 3
Available
Module with a 1.14" IPS LCD display with a resolution of 240x135 px and a monochrome HM01B0 camera. Equipped with an RP2040 microcontroller. Waveshare PICO-Cam-A
zł81.73
Delivery date unknown
No product available!
Other products in the same category (16)
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 140
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity. Raspberry Pi SC0918
Regular pricezł28.91zł26.90
24h
Available quantity: 1625
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity. Version with soldered connectors. Raspberry Pi SC0919
zł31.89
24h
Available quantity: 161
Available
Evaluation board with a Raspberry Pi RP2040 microcontroller and a TCP/IP W5500 controller. WIZnet W5500-EVB-PICO
zł53.51
24h
Available quantity: 125
Available
CAN 2.0 module based on the MCP2551 and MCP2515 systems, equipped with the RP2040 microcontroller. Seeed Studio 102991596
zł99.00
24h
Available quantity: 3
Available
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM624
zł143.18
24h
Available quantity: 2
Available
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM636
zł185.58
24h
Available quantity: 4
Available
Base board with soldered Raspberry Pi Pico W module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI-W
zł64.23
24h
Available quantity: 2
Available
Base board with soldered Raspberry Pi Pico module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI
zł68.11
24h
Available quantity: 10
Available
Module with a round 1.28" IPS LCD display with a resolution of 240x240 px and RP2040 microcontroller. Equipped with an accelerometer and a gyroscope. Waveshare RP2040-LCD-1.28
zł77.05
24h
Available quantity: 9
Available
The board features the Raspberry Pi Foundation\'s RP2040 microcontroller and the WizFi360 module, which provides 2.4GHz WiFi communication over 802.11 b/g/n. WIZnet WizFi360-EVB-Pico
zł35.90
24h
Available quantity: 17
Available
Board with the RP2040 microcontroller in the form of a USB dongle. Equipped with edge connectors, RGB LED, boot and reset button. Waveshare RP2040-One
zł22.99
24h
Available quantity: 9
Available
USB RTC module based on Raspberry Pi RP2040 microcontroller. It combines MicroSD card slot, LCD display and CR1220 battery holder. SB Components SKU25138
zł296.82
24h
Available quantity: 3
Available
The RP2040 microcontroller board features two 133 MHz ARM Cortex-M0+ cores and 264 kB of RAM. The board also includes 2 MB of QSPI Flash memory. The chip can be programmed in C/C++, CircuitPython or MicroPython. DFRobot DFR0959
zł45.88
24h
Available quantity: 6
Available
A kit containing an LED strip driver module and WS2812/Neopixel tape. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM657
zł176.82
24h
Available quantity: 5
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores that operate at 133 MHz. It has 264 kB of RAM, and the board also includes 16 MB of QSPI Flash memory. The chip can be programmed in C/C++ or MicroPython. Board with connectors. Waveshare RP2040-Plus-16MB-M
zł53.80
24h
Available quantity: 2
Available
Camera adapter based on Raspberry RP2040, dedicated to TinyML development. is equipped with a 2.4-inch LCD screen, microphone, camera connectors and an IMU module. It allows you to take photos, use WiFi, SD card and USB mass storage. ArduCam B0432