RP2350 MCU board with 1.28″ round touch LCD 240×240 and enclosure - Waveshare 29075
ID: 1197478
5902186321687
zł108.22
Tax included
zł87.98 tax excl.
RP2350-Touch-LCD-1.28-B is a compact development module with a color touch screen, ideal for projects requiring an HMI interface and mobile integration with sensors. Thanks to the CNC enclosure, the product gains durability and better heat dissipation, making it suitable for prototyping and embedded applications where reliability and elegant design are important. Support for multiple programming languages and extensive technical documentation facilitate rapid development of applications based on ARM and RISC-V architecture.
Description
The RP2350-Touch-LCD-1.28-B module integrates the RP2350 microcontroller with a 1.28-inch capacitive IPS touch screen with a resolution of 240×240 pixels, all enclosed in a CNC aluminum housing with a matte acrylic bottom cover. The device, based on dual-core and dual-ISA architecture (ARM Cortex-M33 + RISC-V Hazard3), operates at a frequency of up to 150 MHz. The module includes 520 KB of SRAM and 16 MB of NOR Flash memory.
The board features a USB 1.1 interface (host/device), Li-Ion battery charging management (ETA6098), a temperature sensor, and a 6-axis IMU (QMI8658) with accelerometer and gyroscope. Programming is done via USB Type-C using the drag-and-drop method, with support for C/C++, Arduino, and MicroPython environments. A SH1.0 (12PIN) cable is included, and 6 GPIO lines are available through a dedicated connector.
Features
- Microcontroller: RP2350 – 2× ARM Cortex-M33 + 2× RISC-V Hazard3, up to 150 MHz
- Memory: 520 KB SRAM, 16 MB NOR Flash
- Display: IPS, 1.28", 240×240, 65K colors, capacitive touch
- Sensors: QMI8658 (6DOF IMU), temperature sensor
- Li-Ion charger: ETA6098, MX1.25 battery connector
- USB 1.1 Type-C interface, host/device support
- 6 GPIO via SH1.0 connector
- Sleep and low-power modes
- Enclosure: CNC aluminum housing, acrylic bottom cover
Included in the set
- RP2350-Touch-LCD-1.28-B x1
- SH1.0 12PIN cable x1
1197478
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 16 MB
- Number of I/O
- 6
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 48mm
- Width
- 48 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
This modern development board features a dual-core Cortex-M33 microcontroller clocked at 150 MHz, 520 KB of RAM, and 8 MB of QSPI Flash. It features a rich set of interfaces, including I2C, SPI, UART, 24 PWM channels, and an HSTX port for high-speed differential data transfer. The board features a STEMMA QT connector, a built-in 200 mA+ LiPo charger, a USB-C port with a UF2 bootloader, and NeoPixel LEDs and a red LED for signaling. The Feather RP2350 is compatible with MicroPython, CircuitPython, Arduino, and C/C++. Adafruit 6000
zł63.04
24h
Available quantity: 1
Available
The RP2040 MCU board combines the high performance of two ARM Cortex M0+ cores clocked at up to 133 MHz, with 264 KB of SRAM, 2 MB of Flash, and integrated Bluetooth 5.1 for easy wireless communication. With simple programming, multiple GPIO interfaces, and support for C/C++, MicroPython, and Arduino, the board is ideal for IoT projects and other advanced applications. Waveshare RP2040-BLE
zł30.25
24h
Available quantity: 2
Available
Module with round 1.28" IPS LCD display and 240x240 px resolution and RP2040 chip. SB Components 24018
zł190.51
24h
Available quantity: 4
Available
Waveshare RP2350-One is a compact development board featuring the RP2350A microcontroller with dual-core architecture: Arm Cortex-M33 and RISC-V. It offers a rich set of peripherals and 4 MB of Flash memory. With a direct USB Type-A connector, support for C/C++ and MicroPython, and SMT mounting capability, it is ideal for modern embedded applications, automation, and technical education.
zł24.35
24h
Available quantity: 3
Available
USB RTC module based on Raspberry Pi RP2040 microcontroller. It combines MicroSD card slot, LCD display and CR1220 battery holder. SB Components SKU25138
zł296.82
24h
Available quantity: 3
Available
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM624
zł143.18
24h
Available quantity: 2
Available
Module with a round 1.28" IPS LCD display with a resolution of 240x240 px and RP2040 microcontroller. Equipped with an accelerometer and a gyroscope. Waveshare RP2040-LCD-1.28
zł77.05
24h
Available quantity: 11
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
zł16.90
24h
Available quantity: 6
Available
Board with RP2040 microcontroller equipped with two ARM Cortex-M0+ 133 MHz cores, 264 kB RAM. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++, CircuitPython or MicroPython. SB Components 26531
zł30.50
24h
Available quantity: 3
Available
NeoPixel 8-channel RGB LED driver. It features an RP2040 microcontroller with two ARM Cortex-M0+ cores, 264 kB of RAM and 8 MB of external Flash memory. Adafruit 5650
zł82.37
24h
Available quantity: 4
Available
RP2350-LCD-0.96-M is a versatile development board with a display, designed for projects based on RP2350A microcontrollers. It supports multiple interfaces and programming languages, features pre-soldered headers, and is compatible with Pico HAT modules, making it ideal for prototyping embedded systems, portable devices, and educational projects.
zł44.45
24h
Available quantity: 3
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Tiny
zł20.04
24h
Available quantity: 14
Available
A compact and powerful development board featuring the RP2350B microcontroller, featuring a dual-core ARM Cortex-M33 processor and Hazard3 RISC-V processor. It features 520 KB of SRAM, 16 MB of Flash, expandable with PSRAM, a DVI connector, a PIO-USB port, a microSD slot, and a 40-pin GPIO header. The board supports SPI, I2C, UART, and USB communication, and offers 12 programmable state machines (PIOs) and an on-board temperature sensor. Waveshare RP2350-PiZero
zł51.52
6 weeks
No product available!
Mini board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz and 264 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM558
zł55.35
24h
Available quantity: 5
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-17745
zł125.42
24h
Available quantity: 3
Available
Base board with soldered Raspberry Pi Pico module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI
zł68.11
24h
Available quantity: 10
Available
RP2350-Touch-LCD-1.28-B is a compact development module with a color touch screen, ideal for projects requiring an HMI interface and mobile integration with sensors. Thanks to the CNC enclosure, the product gains durability and better heat dissipation, making it suitable for prototyping and embedded applications where reliability and elegant design are important. Support for multiple programming languages and extensive technical documentation facilitate rapid development of applications based on ARM and RISC-V architecture.