Tufty 2040 - module with LCD display and RP2040 microcontroller + accessories
ID: 1181334
769894022153
zł185.58
Tax included
zł150.88 tax excl.
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM636
Description
Module with a 2.4" LCD display with a resolution of 320x240 px based on the Raspberry Pi RP2040 microcontroller. The system has two ARM Cortex M0 + cores operating at a frequency of 133 MHz and 264 KB of RAM memory. The microcontroller is not equipped with flash memory, but the board has 8 MB external memory connected via QSPI interface.
The board has 5 user buttons and a Qw/ST (Qwiic/STEMMA QT) connector with an I2C interface, which allows you to connect additional sensors. It is powered via the USB type C connector or via the JST-PH connector for battery connection.
The module uses a color LCD IPS display with a diagonal of 2.4" and a resolution of 320x240 pixels. The built-in controller communicates via the parallel 8080 interface. The set includes a battery basket and a strap that allows the module to be used as a pendant. to or even as part of the weather station.
Features
- RP2040 microcontroller (Dual Arm Cortex M0 + operating at speeds up to 133Mhz with 264kB SRAM)
- 8MB QSPI flash memory supporting XiP
- 2.4" IPS LCD display with a resolution of 320x240 pixels
- ST7789V controller
- 5 user buttons
- Reset and BOOT button
- Phototransistor
- White LED
- JST-PH connector for battery connection (3 V to 5.5 V)
- USB-C connector for programming and power
- Qw/ST Connector (Qwiic/STEMMA QT)
Kit contains
- Tufta module 2040
- 3xAAA battery basket
- 3 AAA batteries
- Velcro
- Black lanyard
- USB-C to USB-A cable
1181334
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 8 MB
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 65,2 mm
- Width
- 52,70 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The first microcontroller designed by the Raspberry Pi foundation, equipped with two ARM Cortex M0 + cores clocked at 133 MHz, 264 KB of RAM and 30 ports with I2C, SPI, UART and USB interfaces. External flash memory can be connected via the QSPI interface. The system can be programmed in C / C ++ or microPython. Raspberry Pi SC0908
zł4.19
24h
Available quantity: 370
Available
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM610
zł154.89
24h
Available quantity: 1
Available
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM624
zł143.18
24h
Available quantity: 2
Available
Other products in the same category (16)
Development board based on the RP2350 microcontroller with a 4.3-inch capacitive touch display 800 x 480, dual-core and dual-architecture support, CAN, RS485 and I2C interfaces, and isolated digital inputs and outputs, designed for control systems and HMI interfaces. Waveshare RP2350-Touch-LCD-4.3B-BOX
zł193.32
6 weeks
No product available!
Development board featuring the RP2350 microcontroller and a 4.3-inch capacitive touch display with 800 × 480 resolution, dual-core and dual-architecture support, designed for HMI interfaces, control systems, and embedded applications. Waveshare RP2350-Touch-LCD-4.3B
zł164.83
6 weeks
No product available!
RP2350 development board with a round 1.46" capacitive IPS touch display 480x480, supporting multi-touch and equipped with IMU sensors, RTC, and a wide range of interfaces. RP2350-Touch-LCD-1.46B Waveshare 32868
zł91.61
6 weeks
No product available!
RP2350 development board featuring a 1.46″ round capacitive IPS touch display with 480×480 resolution, multi-touch support, integrated IMU and RTC sensors, rich peripheral interfaces, and protective cover glass. RP2350-Touch-LCD-1.46 Waveshare 32867
zł100.11
6 weeks
No product available!
RP2350-Touch-LCD-2.1B - Development board with 2.1" round capacitive touch display 480x480 + 2.5D...
Development board based on the RP2350 microcontroller, featuring a 2.1" round IPS display with a resolution of 480 x 480 px, a capacitive touch panel, and an extensive set of peripheral interfaces. Waveshare RP2350-Touch-LCD-2.1B
zł139.69
6 weeks
No product available!
Development board based on the RP2350 microcontroller, featuring a 2.1" round IPS display with 480 x 480 px resolution, a flat capacitive touch panel, and an extensive set of peripheral interfaces. Waveshare RP2350-Touch-LCD-2.1
zł139.69
6 weeks
No product available!
Development board based on the RP2350B microcontroller, featuring a 3.49-inch IPS capacitive touch display with 172 x 640 resolution, supporting ARM Cortex-M33 and RISC-V architectures, with audio interfaces, TF card slot, and a wide range of peripherals. Waveshare RP2350-Touch-LCD-3.49-EN
zł126.75
6 weeks
No product available!
Development board based on the RP2350B microcontroller, featuring a 3.49-inch IPS capacitive touch display with 172 x 640 resolution, supporting ARM Cortex-M33 and RISC-V architectures, with audio interfaces, TF card slot, and a wide range of peripherals, with an 18650 lithium battery included. Waveshare RP2350-Touch-LCD-3.49
zł133.64
6 weeks
No product available!
Development board based on the RP2350B microcontroller with a 4-inch IPS display (480 × 480 px) and a 5-point capacitive touch panel, featuring CAN, RS485, I2C interfaces, RTC, a 6-axis IMU, and a TF card slot. Designed for modern HMI interfaces and multi-touch control systems. Waveshare RP2350-Touch-LCD-4
zł143.64
6 weeks
No product available!
Development board based on the RP2350B microcontroller with a 4-inch IPS display (480×480 px), without touch functionality, featuring CAN, RS485, RTC, IMU, and TF card support. Waveshare RP2350-LCD-4
zł115.08
6 weeks
No product available!
Development board with RP2350 microcontroller and a 7-inch touch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, with a capacitive touch panel. Waveshare RP2350-Touch-LCD-7
zł158.33
24h
Available quantity: 1
Available
Development board with RP2350 microcontroller and a 7-inch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, in a version without touch support. Waveshare RP2350-LCD-7
zł128.94
24h
Available quantity: 3
Available
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and integrated LC76G GPS module. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, and includes a ceramic GNSS antenna in the set, enabling the development of portable HMI devices and embedded systems with positioning functionality. Waveshare RP2350-Touch-AMOLED-1.75-G
zł184.16
6 weeks
No product available!
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The version with protective enclosure is designed for portable devices, HMI panels, and interactive embedded systems requiring high-quality image output and touch support. Waveshare RP2350-Touch-AMOLED-1.75-B
zł160.02
6 weeks
No product available!
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, enabling the development of portable devices, HMI panels, and interactive embedded systems requiring high-quality display output and touch support. Waveshare RP2350-Touch-AMOLED-1.75
zł143.93
6 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE001
zł356.28
4 weeks
No product available!
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM636