RP2040-Tiny board with RP2040 microcontroller - Waveshare 24664
ID: 1185248
5906623423736
zł19.68
Tax included
zł16.00 tax excl.
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Tiny
Description
The board features the RP2040 microcontroller designed by the Raspberry Pi Foundation. The chip has two ARM Cortex M0+ cores running at up to 133 MHz and 264 kB of RAM. The microcontroller is not equipped with Flash memory, but there is a 2MB external memory on the board connected via the QSPI interface.
| 1. FPC connector | 4. RP2040 |
| 2. RT9193-33 | 5. WS2812 |
| 3. NOR-Flash 2 MB |
In addition to the RP2040 chip and Flash memory, the user has a 3.3 V voltage stabiliser, an RGB diode and GPIO outputs where peripherals such as 12-bit ADC, PWM inputs, I2C, SPI and UART interfaces are brought out. The module is programmed via an 8-pin FPC connector (an FPC-USB adapter is required). The use of such a connector reduces the size of the board and eliminates the protruding USB connector, making it easier to install in the target device.
The platform supports the popular MicroPython and C/C++ programming languages. Programmes can be uploaded to the memory using a USB interface. A guide with examples of use is available on the product page.
Features
- RP2040 microcontroller designed by Raspberry Pi
- Two ARM Cortex-M0+ cores clocked at up to 133 MHz
- 264 kB of on-board SRAM
- LDO 3.3 V 500 mA stabiliser
- Built-in FPC 8-pin connector for programming and power supply
- 20 x multi-function GPIO pins: ADC, UART, SPI, I2C, PWM
- WS2812 RGB LED
- 2 MB external flash memory
- Supported programming languages: MicroPython and C/C++
- Dimensions: 23.5 x 18 mm
1185248
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 2 MB
- Number of I/O
- 20
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 23,5 mm
- Width
- 18 mm
- USB connector type
- Brak
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
zł16.90
Delivery date unknown
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
zł19.90
24h
Available quantity: 63
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. It comes with a USB adapter. Waveshare RP2040-Tiny-Kit
zł25.03
Delivery date unknown
No product available!
Other products in the same category (16)
Miniature KAmod RP2040 module with Raspberry RP2040 microcontroller and 16 MB flash memory provides high computing performance in a compact format. Suitable for educational, hobbyist, and prototyping applications of devices with USB, I2C, SPI, and UART communication.
zł22.21
24h
Available quantity: 175
Available
Development board based on the RP2350A microcontroller featuring a unique dual-core, dual-architecture design (Arm Cortex-M33 + Hazard3 RISC-V), an onboard 6-axis sensor, and an 8×8 RGB LED matrix for IoT, robotics, and interactive systems. Waveshare RP2350-Matrix
zł171.17
24h
Available quantity: 5
Available
RP2350B-Plus-W is an advanced development board with an RP2350B microcontroller and wireless Wi-Fi/Bluetooth communication, enabling selection between ARM and RISC-V architectures. Intended for educational applications, IoT device prototyping, and projects requiring versatile communication and processing capabilities.
zł56.42
24h
Available quantity: 2
Available
This development board is based on the Raspberry Pi RP2350 microcontroller with an Arm Cortex-M33 or RISC-V Hazard3 core. It offers 2.4/5 GHz Wi-Fi, Bluetooth 5.0, and 8 MB of Flash memory, delivering high performance in a compact form factor. With a USB-C port and full Pico W compatibility, it\'s ideal for IoT projects, home automation, and learning to program. Elecrow RP2350 Pico W5 Board
zł55.18
24h
Available quantity: 6
Available
This modern development board features a dual-core Cortex-M33 microcontroller clocked at 150 MHz, 520 KB of RAM, and 8 MB of QSPI Flash. It features a rich set of interfaces, including I2C, SPI, UART, 24 PWM channels, and an HSTX port for high-speed differential data transfer. The board features a STEMMA QT connector, a built-in 200 mA+ LiPo charger, a USB-C port with a UF2 bootloader, and NeoPixel LEDs and a red LED for signaling. The Feather RP2350 is compatible with MicroPython, CircuitPython, Arduino, and C/C++. Adafruit 6000
zł63.04
24h
Available quantity: 2
Available
Pimoroni Pico LiPo 2 development board – RP2350B, 16MB Flash, 8MB PSRAM, USB-C, LiPo, Qw/ST – PIM775
Pimoroni Pico LiPo 2 PIM775 is an advanced development board with the RP2350B, 16 MB of flash memory and 8 MB of PSRAM, created with battery-powered projects in mind. Thanks to the Qw/ST, SP/CE and JST connectors and the built-in LiPo charging system, it enables quick prototyping of mobile devices and remote IoT systems.
zł109.74
24h
Available quantity: 1
Available
Pimoroni Pico LiPo 2 XL W development board – RP2350B, 16MB Flash, 8MB PSRAM, Wireless/Bluetooth,...
Pimoroni Pico LiPo 2 XL W PIM776 is an extended development board with the RP2350B, offering Wi-Fi and Bluetooth connectivity, 16 MB of flash memory and 8 MB of PSRAM. Thanks to its 40 GPIO pins, integrated LiPo charging system and numerous interfaces, it works well in advanced IoT projects and battery-powered systems.
zł152.88
24h
Available quantity: 1
Available
A modular control platform based on the RP2040 microcontroller, designed for advanced robotics and engineering projects. It can simultaneously support up to six high-power modules, such as motor, servo, and LED lighting controllers. Power is supplied via an XT30 connector, ranging from 5 to 17 V, with built-in current and voltage protection. It supports MicroPython programming. Pimoroni PIM687
zł173.25
4 weeks
No product available!
Development board based on the RP2350A microcontroller with a 1.85-inch round capacitive LCD touch display at 360 x 360 resolution and 65K colors, supporting ARM Cortex-M33 and RISC-V architectures, comes with a speaker box, designed for user interfaces and embedded systems. Waveshare RP2350-Touch-LCD-1.85C-BOX-EN
zł135.23
6 weeks
No product available!
RP2350 Touch LCD 1.85 – Development Board with Round Touch Display, Speaker Enclosure and Battery...
Development board based on the RP2350A microcontroller with a 1.85-inch round capacitive LCD touch display at 360 x 360 resolution and 65K colors, supporting ARM Cortex-M33 and RISC-V architectures, supplied with a speaker enclosure and a 3.7 V lithium battery. Waveshare RP2350-Touch-LCD-1.85C-BOX
zł142.86
6 weeks
No product available!
RP2350 Touch LCD 1.85 – Development Board with Round Touch Display (Standard Version) - Waveshare...
Development board based on the RP2350A microcontroller with a 1.85-inch round capacitive LCD touch display at 360 x 360 resolution and 65K colors, supporting ARM Cortex-M33 and RISC-V architectures, designed for user interfaces and embedded systems. Waveshare RP2350-Touch-LCD-1.85C
zł127.62
6 weeks
No product available!
Development board based on the RP2350 microcontroller with a 4.3-inch capacitive touch display 800 x 480, dual-core and dual-architecture support, CAN, RS485 and I2C interfaces, and isolated digital inputs and outputs, designed for control systems and HMI interfaces. Waveshare RP2350-Touch-LCD-4.3B-BOX
zł193.32
6 weeks
No product available!
Development board featuring the RP2350 microcontroller and a 4.3-inch capacitive touch display with 800 × 480 resolution, dual-core and dual-architecture support, designed for HMI interfaces, control systems, and embedded applications. Waveshare RP2350-Touch-LCD-4.3B
zł164.83
6 weeks
No product available!
RP2350 development board with a round 1.46" capacitive IPS touch display 480x480, supporting multi-touch and equipped with IMU sensors, RTC, and a wide range of interfaces. RP2350-Touch-LCD-1.46B Waveshare 32868
zł91.61
6 weeks
No product available!
RP2350 development board featuring a 1.46″ round capacitive IPS touch display with 480×480 resolution, multi-touch support, integrated IMU and RTC sensors, rich peripheral interfaces, and protective cover glass. RP2350-Touch-LCD-1.46 Waveshare 32867
zł100.11
6 weeks
No product available!
RP2350-Touch-LCD-2.1B - Development board with 2.1" round capacitive touch display 480x480 + 2.5D...
Development board based on the RP2350 microcontroller, featuring a 2.1" round IPS display with a resolution of 480 x 480 px, a capacitive touch panel, and an extensive set of peripheral interfaces. Waveshare RP2350-Touch-LCD-2.1B
zł139.69
6 weeks
No product available!
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Tiny