RP2350 development board with 1.64-inch 280x456 AMOLED touch display - Waveshare 31337
ID: 1198966
5902186322790
zł105.12
Tax included
zł85.46 tax excl.
RP2350-Touch-AMOLED-1.64-M is a compact board featuring the RP2350 microcontroller and an AMOLED display, equipped with touch input, motion sensors, and a full set of peripheral interfaces. Designed for modern mobile applications, HMI systems, and experiments with RISC-V and ARM architectures.
Description
The RP2350-Touch-AMOLED-1.64-M development board features the RP2350A microcontroller, offering high performance in a compact form. It includes a 1.64″ AMOLED display with a 280×456 resolution and a capacitive touch panel (FT3168), allowing for the creation of advanced graphical user interfaces. The RP2350A supports either dual ARM Cortex-M33 cores or dual Hazard3 RISC-V cores, enabling flexible architecture usage. The board also integrates a 6-axis sensor (accelerometer and gyroscope), 16 MB Flash memory, RTC, TF card slot, and a Li-ion battery connector with charging support. It supports programming in C/C++, MicroPython, and Arduino IDE.
Features
- Microcontroller: RP2350A (2× Cortex-M33 or 2× Hazard3 RISC-V)
- Clock speed: up to 150 MHz
- Memory: 520 KB SRAM, 16 MB Flash (W25Q128JVSIQ)
- Display: 1.64″ AMOLED, 280×456, 16.7 M colors
- Brightness: 350 cd/m²
- Contrast: 60000:1
- Viewing angle: 178°
- Display controller: CO5300 (QSPI)
- Touch panel: capacitive, FT3168 (I²C)
- Sensors: QMI8658 – 3-axis accelerometer + 3-axis gyroscope
- Connectors: USB 1.1 (host/device), Type-C, TF (microSD), MX1.25 (Li-ion)
- GPIO: 17×
- UART: 2×
- I²C: 2×
- ADC: 3× (12-bit)
- PWM channels: 13×
- PIO (programmable I/O state machines): 12×
- Battery power: 3.7 V Li-ion connector with charge/discharge support
- Power-saving modes: sleep and standby
- Programming: USB drag-and-drop, SDK support
- Dimensions: 44 mm × 29.1 mm × 9.6 mm
1198966
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 16 MB
- Number of I/O
- 17
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- Yes
- Length
- 44 mm
- Width
- 29,1 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
This RP2040-based evaluation board features an embedded W5500 Ethernet controller, providing hardware-based TCP/IP support without burdening the microcontroller. Its compact design, PoE support, and Raspberry Pi Pico-compatible interfaces make it ideal for IoT, automation, and networking projects. WIZnet W5500-EVB-Pico-POE
zł64.89
5 weeks
No product available!
Module with a round 0.99" IPS LCD display with a resolution of 128x115 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-LCD-0.99-B
zł77.53
24h
Available quantity: 2
Available
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM610
zł154.89
24h
Available quantity: 1
Available
RP2350-Touch-AMOLED-1.8 with battery is an advanced development board with an AMOLED display, touch support, motion sensors, audio, and a wide range of interfaces. Designed for mobile and embedded applications, it enables the creation of compact interactive devices with full open-source support.
zł127.38
4 weeks
No product available!
RP2350-Zero enables rapid development of embedded applications while maintaining minimal mounting requirements and excellent flexibility in baseboard design. Particularly recommended for portable devices, educational use, and as a control module in larger systems.
zł21.92
24h
Available quantity: 4
Available
A powerful development board based on the Raspberry Pi RP2350 chip with a dual-core Cortex M33 150 MHz processor and 528 KB RAM, offering 37 GPIO pins and 16 MB of QSPI Flash memory. It supports power supply via USB-C or DC, has a DVI connector, microSD slot, Pico Probe debug port and programmable UF2 bootloader. Thanks to the wide support of programming languages (C/C++, MicroPython, CircuitPython, Arduino), it will be suitable for both educational projects and advanced embedded solutions. Adafruit 6003
zł132.86
24h
Available quantity: 2
Available
RP2350-USB-A is a versatile development board based on the modern RP2350A microcontroller with a unique dual-core architecture: Arm Cortex-M33 + RISC-V. Thanks to the USB Type-A port supported via PIO, a wide range of interfaces, and a compact form factor, the board is ideal for prototyping peripheral devices, learning programming, and integrating into custom projects as an SMD module.
zł24.96
24h
Available quantity: 9
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
zł19.90
24h
Available quantity: 65
Available
Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM674
zł244.45
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 4900
zł52.08
24h
Available quantity: 4
Available
RP2350-LCD-0.96-M is a versatile development board with a display, designed for projects based on RP2350A microcontrollers. It supports multiple interfaces and programming languages, features pre-soldered headers, and is compatible with Pico HAT modules, making it ideal for prototyping embedded systems, portable devices, and educational projects.
zł45.42
24h
Available quantity: 2
Available
RP2350-Touch-AMOLED-1.43-B is a compact development board with an AMOLED display and capacitive touch, enclosed in a robust CNC-machined case. Integrated sensors and interfaces offer extensive expansion and application possibilities in HMI projects, wearable electronics, and smart control systems. Support for C/C++, MicroPython, and Arduino IDE, along with rich SDK resources, facilitates rapid project deployment.
zł132.27
24h
Available quantity: 1
Available
This Raspberry Pi RP2350B microcontroller development board features a dual-core ARM Cortex-M33 or Hazard3 RISC-V processor. It features a 2.8-inch 480x480 circular IPS display with a capacitive touchscreen and LVGL support. It includes 16MB of flash memory, a real-time clock, a 6-axis motion sensor, a microSD slot, and a lithium battery connector. It\'s ideal for HMI, IoT, and smart wearable device projects. Waveshare RP2350-Touch-LCD-2.8C
zł171.02
6 weeks
No product available!
Board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores and a 5x5 RGB LED matrix. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++ or MicroPython. Waveshare RP2040-Matrix
zł31.64
24h
Available quantity: 4
Available
Base board with soldered Raspberry Pi Pico W module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI-W
zł64.23
24h
Available quantity: 3
Available
Module with a 2.9" ePaper display and a Raspberry Pi Pico W board equipped with WiFi communication. It has a built-in Qwiic/Stemma QT connector with an I2C interface, buttons and a battery connector. Perfect as a display for a weather station. Pimoroni PIM669
zł215.19
24h
Available quantity: 4
Available
RP2350-Touch-AMOLED-1.64-M is a compact board featuring the RP2350 microcontroller and an AMOLED display, equipped with touch input, motion sensors, and a full set of peripheral interfaces. Designed for modern mobile applications, HMI systems, and experiments with RISC-V and ARM architectures.