RP2040-LCD-1.28-B module with 1.28" round IPS LCD and RP2040 microcontroller - Waveshare 26369
ID: 1189115
5906623485284
zł93.97
Tax included
zł76.40 tax excl.
Module with a round 1.28" IPS LCD display with a resolution of 240x240 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-LCD-1.28-B
Description
The module with a 1.28" round, color IPS LCD display with a resolution of 240x240 pixels and an RP2040 chip. The microcontroller has two ARM Cortex M0+ cores running at up to 133 MHz and 264 kB of RAM. It does not have built-in flash memory, but there is an external 2 MB memory on the board connected via the QSPI interface.
| 1. USB Type-C | 5. 1.27mm Connector |
| 2. ETA6096 | 6. 2 MB NOR-Flash Memory W25Q16JVUXIQ |
| 3. Battery Connector | 7. RP2040 |
| 4. IMU QMI8658 | 8. RESET Button |
| 9. BOOT Button |
The display uses a built-in GC9A01A controller that communicates via the SPI interface. It can display content in a full 65K color range. Additionally, the user has access to a 6-axis IMU QMI8658C, which combines an accelerometer and gyroscope, a lithium battery charger, and connectors with GPIO pins exposed.
The RP2040 microcontroller is programmed via a USB Type-C connector and supports popular programming languages such as MicroPython and C/C++. The module is enclosed in a CNC metal case. It is suitable for small IoT projects and building your own watch. Full documentation and example programs are available on the product page.
Features
- RP2040 Microcontroller
- Dual ARM Cortex-M0+ cores running up to 133 MHz
- 264 kB built-in SRAM
- 2 MB external QSPI Flash memory
- Display type: LCD IPS
- Diameter: 1.28"
- Resolution: 240x240 px
- Interface: SPI
- Dot pitch: 0.135 x 0.135 mm
- Display color: RGB 65K
- Wide viewing angle
- Display controller: GC9A01
- 6-axis IMU QMI8658
- Lithium battery charger
- CNC metal housing with acrylic matte-polished bottom plate
- All GPIO pins are exposed on a 1.27 mm female connector
- GPIO Interface: 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x PWM
- Temperature sensor
- Dimensions (diameter x thickness): 48 x 9.5 mm
1189115
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 2 MB
- Number of I/O
- 20
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 48mm
- Width
- 48 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB type A and USB type C plugs, length 2m, white
zł7.06
Delivery date unknown
No product available!
The USB-C 2.0 Natec Prati cable, 2 meters long, is a universal solution that enables fast and safe charging of devices with up to 100 W power thanks to Power Delivery technology support. Made from durable TPE material, it ensures flexibility, durability, and user convenience, while the included Velcro strap facilitates storage and transport. Natec NKA-2147
zł20.38
Delivery date unknown
No product available!
The USB-C 2.0 Natec Prati cable, 1 meters long, is a universal solution that enables fast and safe charging of devices with up to 100 W power thanks to Power Delivery technology support. Made from durable TPE material, it ensures flexibility, durability, and user convenience, while the included Velcro strap facilitates storage and transport. Natec NKA-2146
zł17.33
24h
Available quantity: 3
Available
Other products in the same category (16)
Development board based on the RP2350B microcontroller with a 4-inch IPS display (480×480 px), without touch functionality, featuring CAN, RS485, RTC, IMU, and TF card support. Waveshare RP2350-LCD-4
zł115.08
6 weeks
No product available!
Development board with RP2350 microcontroller and a 7-inch touch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, with a capacitive touch panel. Waveshare RP2350-Touch-LCD-7
zł158.33
24h
Available quantity: 1
Available
Development board with RP2350 microcontroller and a 7-inch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, in a version without touch support. Waveshare RP2350-LCD-7
zł128.94
24h
Available quantity: 3
Available
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and integrated LC76G GPS module. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, and includes a ceramic GNSS antenna in the set, enabling the development of portable HMI devices and embedded systems with positioning functionality. Waveshare RP2350-Touch-AMOLED-1.75-G
zł184.16
6 weeks
No product available!
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The version with protective enclosure is designed for portable devices, HMI panels, and interactive embedded systems requiring high-quality image output and touch support. Waveshare RP2350-Touch-AMOLED-1.75-B
zł160.02
6 weeks
No product available!
RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, enabling the development of portable devices, HMI panels, and interactive embedded systems requiring high-quality display output and touch support. Waveshare RP2350-Touch-AMOLED-1.75
zł143.93
6 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE001
zł356.28
4 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE004
zł485.94
4 weeks
No product available!
Educational kit with a 2.8" color TFT IPS display with a resolution of 320 × 240 px and adjustable backlight, ideal for game development, data visualization, and IoT projects. The device is based on the RP2350B microcontroller (2 × Arm Cortex-M33 250 MHz) with 520 KB SRAM, 16 MB QSPI Flash, and 8 MB PSRAM, and connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery charged via USB-C guarantees mobile operation without a constant power supply. Five buttons, an I2C Qwiic/STEMMA QT connector, and MicroPython support make the kit a versatile platform for learning programming and STEM experiments. Pimoroni WARE002
zł356.36
4 weeks
No product available!
Educational kit with a 2.8" color TFT IPS display with a resolution of 320 × 240 px and adjustable backlight, ideal for game development, data visualization, and IoT projects. The device is based on the RP2350B microcontroller (2 × Arm Cortex-M33 250 MHz) with 520 KB SRAM, 16 MB QSPI Flash, and 8 MB PSRAM, and connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery charged via USB-C guarantees mobile operation without a constant power supply. Five buttons, an I2C Qwiic/STEMMA QT connector, and MicroPython support make the kit a versatile platform for learning programming and STEM experiments. Pimoroni WARE005
zł485.94
4 weeks
No product available!
An interactive educational kit with a 39 x 26 LED matrix (872 diodes) capable of displaying animations, text, and pixel graphics. At the heart of the device is a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB SRAM, 16 MB QSPI Flash, and 8 MB PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery charged via USB-C allows for mobile operation, while additional buttons and a RTC (Real Time Clock) enhance the device\'s functionality. Pimoroni WARE003
zł356.36
4 weeks
No product available!
An interactive educational kit with a 39 x 26 LED matrix (872 diodes) capable of displaying animations, text, and pixel graphics. At the heart of the device is a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB SRAM, 16 MB QSPI Flash, and 8 MB PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery charged via USB-C allows for mobile operation, while additional buttons and a RTC (Real Time Clock) enhance the device\'s functionality. Pimoroni WARE006
zł485.94
4 weeks
No product available!
This development board for building robots and mechatronics projects features 2.4 GHz Wi-Fi and Bluetooth 5.2 connectivity. Based on the RP2350 microcontroller (Dual Arm Cortex-M33 up to 150 MHz, 520 KB SRAM, 4 MB QSPI Flash), it allows you to control two DC motors via a DRV8833C H-bridge and support up to six servos. It features 12 addressable RGB (Neopixel) LEDs, ADC inputs, numerous GPIOs, and two Qw/ST headers for connecting sensors. Pimoroni PIM733
zł250.55
24h
Available quantity: 2
Available
Module with RP2350B microcontroller, clock speed up to 150 MHz, 8 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, USB adapter and FPC cable included, dimensions 25.40 x 25.40 mm. Waveshare Core2350B2-Kit
zł33.42
6 weeks
No product available!
Module with RP2350B microcontroller, up to 150 MHz, 8 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, compact size 25.40 x 25.40 mm. Waveshare Core2350B2
zł30.47
6 weeks
No product available!
Module with RP2350B microcontroller, clock speed up to 150 MHz, 2 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, includes USB adapter and FPC cable, dimensions 25.40 x 25.40 mm. Waveshare Core2350B1-Kit
zł29.45
6 weeks
No product available!
Module with a round 1.28" IPS LCD display with a resolution of 240x240 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-LCD-1.28-B