RP2040-Touch-LCD-1.28-B module with 1.28" round touch IPS LCD and RP2040 microcontroller - Waveshare 26371
ID: 1189114
5906623466108
zł121.67
Tax included
zł98.92 tax excl.
Module with a round 1.28" IPS LCD touch display with a resolution of 240x240 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-Touch-LCD-1.28-B
Description
The module with a round, color touch LCD IPS 1.28" display with a resolution of 240x240 pixels and an RP2040 chip. The microcontroller has two ARM Cortex M0+ cores operating at up to 133 MHz and 264 kB of RAM. It does not have built-in flash memory, but the board features external memory with a capacity of 16 MB connected via the QSPI interface.
| 1. USB Type C | 5. RP2040 |
| 2. ETA6096 | 6. IMU QMI8658C |
| 3. LDO RT9013-33GB | 7. BOOT Button |
| 4. 16 MB NOR-Flash W25Q128JVSIQ | 8. RESET Button |
| 9. Battery Connector |
The display uses a built-in GC9A01A controller that communicates via the SPI interface. It can display content in a full 65K color range. It is equipped with a capacitive touch panel, allowing for a simple interface addition. Additionally, the user has access to a 6-axis IMU QMI8658C combining an accelerometer and gyroscope, a lithium battery charger, and connectors with exposed GPIO pins.
The RP2040 microcontroller is programmed through a USB Type C connector and supports popular programming languages MicroPython and C/C++. The module is enclosed in a CNC metal housing. It is suitable for small IoT projects and building your own watch. Full documentation and example programs are available on the product page.
Features
- RP2040 Microcontroller
- Two ARM Cortex-M0+ cores with up to 133 MHz clock speed
- 264 kB built-in SRAM
- 16 MB external QSPI Flash memory
- Display type: LCD IPS
- Capacitive touch panel
- Diameter: 1.28"
- Resolution: 240x240 px
- Interface: SPI
- Pixel size: 0.135 x 0.135 mm
- Display color: RGB 65K
- Wide viewing angle
- Display controller: GC9A01
- 6-axis IMU QMI8658C
- Lithium battery charger
- CNC metal housing with an acrylic, matte-polished bottom plate
- GPIO Connector SH1.0
- Temperature sensor
- Dimensions (diameter x thickness): 48 x 12.5 mm
1189114
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 16 MB
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 48mm
- Width
- 48 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB type A and USB type C plugs, length 1m, white
zł7.24
Delivery date unknown
No product available!
Cable with USB type A and USB type C plugs, length 2m, white
zł7.06
Delivery date unknown
No product available!
The USB-C 2.0 Natec Prati cable, 2 meters long, is a universal solution that enables fast and safe charging of devices with up to 100 W power thanks to Power Delivery technology support. Made from durable TPE material, it ensures flexibility, durability, and user convenience, while the included Velcro strap facilitates storage and transport. Natec NKA-2147
zł20.38
24h
Available quantity: 2
Available
The USB-C 2.0 Natec Prati cable, 1 meters long, is a universal solution that enables fast and safe charging of devices with up to 100 W power thanks to Power Delivery technology support. Made from durable TPE material, it ensures flexibility, durability, and user convenience, while the included Velcro strap facilitates storage and transport. Natec NKA-2146
zł17.33
24h
Available quantity: 1
Available
Other products in the same category (16)
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
zł138.13
4 weeks
No product available!
Mini board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz and 264 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM558
zł55.35
24h
Available quantity: 5
Available
The first microcontroller designed by the Raspberry Pi foundation, equipped with two ARM Cortex M0 + cores clocked at 133 MHz, 264 KB of RAM and 30 ports with I2C, SPI, UART and USB interfaces. External flash memory can be connected via the QSPI interface. The system can be programmed in C / C ++ or microPython. Raspberry Pi SC0908
zł4.19
24h
Available quantity: 398
Available
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00052
zł139.00
24h
Available quantity: 21
Available
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00053
zł159.00
24h
Available quantity: 14
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 4900
zł51.49
4 weeks
No product available!
The board with the RP2040 microcontroller in the form of a USB dongle. Equipped with Stemma QT connector, RGB NeoPixel diode, boot and reset button. Adafruit 5056
zł39.58
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
zł16.90
24h
Available quantity: 2
Available
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5128
zł264.54
4 weeks
No product available!
Mechanical keyboard module with LED backlight, encoder and display. Based on the RP2040 microcontroller. Adafruit 5100
zł170.90
24h
Available quantity: 1
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
zł21.89
24h
Available quantity: 79
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The additional ESP8285 system allows communication in the WiFi network. Seeed Studio 102991555
zł61.34
24h
Available quantity: 1
Available
A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567
zł232.36
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM578
zł66.22
24h
Available quantity: 6
Available
Development board with RP2040 microcontroller. Equipped with a driver for DC motors, servos and Grove connectors. Dedicated to the construction of robots. Cytron MAKER-PI-RP2040
zł62.90
24h
Available quantity: 11
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-18288
zł70.41
24h
Available quantity: 4
Available
Module with a round 1.28" IPS LCD touch display with a resolution of 240x240 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-Touch-LCD-1.28-B