zł104.28 tax excl.
A powerful development board based on the Raspberry Pi RP2350 chip with a dual-core Cortex M33 150 MHz processor and 528 KB RAM, offering 37 GPIO pins and 16 MB of QSPI Flash memory. It supports power supply via USB-C or DC, has a DVI connector, microSD slot, Pico Probe debug port and programmable UF2 bootloader. Thanks to the wide support of programming languages (C/C++, MicroPython, CircuitPython, Arduino), it will be suitable for both educational projects and advanced embedded solutions. Adafruit 6003
RP2350 Metro Line is an advanced development board based on the Raspberry Pi RP2350 chip, ideal for projects requiring Arduino form-factor compatibility or additional space and debugging ports. Onboard, it features a dual-core Cortex M33 processor running at 150 MHz and 528 KB RAM, providing high computing performance. Additionally, it includes 16 MB of QSPI Flash memory for storing programs and user files. The board offers up to 37 available GPIO pins, including analog pins, an HSTX connector for high-speed DVI video output, and USB host outputs. With a built-in microSD card slot, it supports SPI and advanced SDIO interface (for advanced users). Power can be supplied via a USB-C port or a 5.5/2.1 mm DC jack with a buck converter supporting 6 to 17 V input. The PCB includes RESET and BOOT buttons, an onboard RGB NeoPixel, and a Pico Probe debug port. Users will appreciate the RX/TX switch that allows UART pin order to be set either to the classic Arduino standard or to the physical RP2350 pin mapping. Programming the board is simple thanks to the built-in UF2 bootloader, which allows firmware files to be dragged and dropped without additional hardware. The board supports programming in C/C++, MicroPython, CircuitPython, and unofficially with Arduino, making it suitable for both beginners and advanced developers.

Data sheet
Manufacturer
Responsible person
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
Module with RP2350B microcontroller, clock speed up to 150 MHz, 0 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, includes USB adapter and FPC cable, dimensions 25.40 x 25.40 mm. Waveshare Core2350B0-Kit
Module with RP2350B microcontroller, clock speed up to 150 MHz, 0 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, compact size 25.40 x 25.40 mm. Waveshare Core2350B0
Development board with RP2350B microcontroller, 2.41" AMOLED touch display, 450 x 600 px resolution, QSPI interface, 6-axis sensor, RTC, TF card slot and Li-ion battery connector, version with protective case. Waveshare RP2350-Touch-AMOLED-2.41-B
No product available!
Development board with RP2350B microcontroller, 2.41" AMOLED touch display, 450 x 600 px resolution, QSPI interface, 6-axis sensor, RTC, TF card slot and Li-ion battery connector, version without protective case. Waveshare RP2350-Touch-AMOLED-2.41
No product available!
Development board with RP2350B microcontroller, equipped with a 3.5" IPS display with 320 x 480 px resolution, capacitive touch panel, camera interface, audio codec, IMU sensor, microSD slot and USB Type-C, enclosed with OV5640 camera. Waveshare RP2350-Touch-LCD-3.5-C
No product available!
Development board with RP2350B microcontroller, equipped with a 3.5" IPS display with 320 x 480 px resolution, capacitive touch panel, camera interface, audio codec, IMU sensor, microSD slot and USB Type-C. Waveshare RP2350-Touch-LCD-3.5
No product available!
Development board with RP2350A microcontroller, 1.54" IPS touch LCD 240 x 240 px, USB-C interface, IMU module, microSD slot and 3.7 V battery included. Waveshare 34333
Development board with RP2350A microcontroller, 1.54" IPS touch LCD 240 x 240 px, USB-C interface, IMU module, microSD slot. No 3.7 V battery included. Waveshare 34332
Development board with RP2350A microcontroller, 1.54" IPS LCD 240 x 240 px, USB-C interface, IMU module and microSD slot. No 3.7 V battery included. Waveshare 34334
Development board with RP2350A microcontroller, 1.54" IPS LCD 240 x 240 px, USB-C interface, IMU module, microSD slot and 3.7 V battery included. Waveshare 34335
Waveshare development board based on the RP2350 microcontroller with a 0.85" 128 × 128px IPS display, 16MB Flash memory, QMI8658 6-axis IMU, audio codec, microphone, TF card slot and 8 programmable RGB LEDs. This version is supplied without a battery and supports an optional 3.7V lithium battery through the MX1.25 connector. Waveshare RP2350-LCD-0.85
No product available!
Waveshare development board based on the RP2350 microcontroller with a 0.85" 128 × 128px IPS display, 16MB Flash memory, QMI8658 6-axis IMU, audio codec, microphone, TF card slot and 8 programmable RGB LEDs. This version includes a 3.7V 1000mAh lithium battery with an MX1.25 connector. Waveshare RP2350-LCD-0.85
No product available!
Development board based on the RP2040 microcontroller combines a dual-core Arm Cortex-M0+ processor with the W6300 Ethernet controller featuring a hardware TCP/IP stack and native IPv4/IPv6 support. The board maintains compatibility with Raspberry Pi Pico while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W6300-EVB-Pico
Development board based on the RP2350 microcontroller combines a dual-core Arm Cortex-M33 processor with the W6100 Ethernet controller featuring a hardware TCP/IP stack and native IPv4/IPv6 support. The board maintains compatibility with Raspberry Pi Pico 2 while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W6100-EVB-Pico2
Development board based on the RP2350 microcontroller combines a dual-core Arm Cortex-M33 processor with the W5500 Ethernet controller featuring a hardware TCP/IP stack. The board maintains compatibility with Raspberry Pi Pico 2 while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W5500-EVB-Pico2
No product available!
Development board based on the RP2350 microcontroller combines a dual-core Arm Cortex-M33 processor with the W5100S Ethernet controller featuring a hardware TCP/IP stack. The board maintains compatibility with Raspberry Pi Pico 2 while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W5100S-EVB-Pico2
A powerful development board based on the Raspberry Pi RP2350 chip with a dual-core Cortex M33 150 MHz processor and 528 KB RAM, offering 37 GPIO pins and 16 MB of QSPI Flash memory. It supports power supply via USB-C or DC, has a DVI connector, microSD slot, Pico Probe debug port and programmable UF2 bootloader. Thanks to the wide support of programming languages (C/C++, MicroPython, CircuitPython, Arduino), it will be suitable for both educational projects and advanced embedded solutions. Adafruit 6003