RP2350 development board with 2.8″ capacitive touch display 240×320 - Waveshare 30706
ID: 1197731
5902186305236
zł107.78
Tax included
zł87.63 tax excl.
RP2350-Touch-LCD-2.8 is a versatile development platform with a touchscreen and audio functions, designed for projects involving user interfaces, audio playback, motion tracking, and remote communication. It combines the processing power of the RP2350 with a rich set of peripherals and low power consumption, making it ideal for portable, educational, and HMI applications.
Description
RP2350-Touch-LCD-2.8 is an advanced development board based on the RP2350 microcontroller, designed for multimedia and interactive projects. It features a 2.8-inch IPS display with 5-point capacitive touch, speaker, IMU sensor, RTC chip, and battery charging management. It supports UART, I2C, and GPIO interfaces, providing broad expansion and integration options.
Features
- Microcontroller: RP2350 (2× ARM Cortex-M33 + 2× Hazard3 RISC-V, up to 150 MHz)
- Memory: 520 KB SRAM, 16 MB NOR Flash
- Display: 2.8" IPS, 240×320 px, 262K colors, SPI interface
- Capacitive touch (I2C), 5-point support, with interrupt
- Sensor: QMI8658 – 6-axis IMU (3× accelerometer, 3× gyroscope)
- RTC: PCF85063 with SH1.0 battery connector
- Audio: PCM5101 audio decoder and amplifier with volume control
- Integrated speaker: 8 Ω 2W
- TF card slot, lithium battery connector (MX1.25)
- USB Type-C with USB 1.1 (host/device) support
- Interfaces: 12PIN GPIO, I2C, UART
- Supported environments: C/C++, MicroPython, Arduino IDE
Included
- RP2350-Touch-LCD-2.8 x1
- Speaker 8 Ω 2W (model 2030) x1
- SH1.0 4PIN cable x2
- SH1.0 12PIN cable x1
1197731
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 16 MB
- Number of I/O
- 12
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 50,5 mm
- Width
- 73 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
RP2350-Touch-AMOLED-1.8 with battery is an advanced development board with an AMOLED display, touch support, motion sensors, audio, and a wide range of interfaces. Designed for mobile and embedded applications, it enables the creation of compact interactive devices with full open-source support.
zł129.36
24h
Available quantity: 4
Available
Ethernet module with RP2040 microcontroller. It has an embedded CH9120 chip with an integrated TCP/IP protocol stack. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-ETH
zł54.59
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4884
zł79.03
24h
Available quantity: 5
Available
RP2350-LCD-0.96 offers a low-cost and flexible solution for creating projects involving information display, battery-powered operation, and full GPIO control. Ideal for portable devices, user interfaces, and educational applications.
zł41.55
24h
Available quantity: 3
Available
Expansion module with a Raspberry Pi Pico W board equipped with WiFi communication. The module has a built-in relay, buffer inputs, sink outputs and analog inputs. Perfect for controlling fans, pumps, solenoid valves, large motors, electronic locks or LED lighting. Pimoroni PIM652
zł169.22
24h
Available quantity: 1
Available
Board with RP2040 microcontroller and W5100S network chip. The module is equipped with an Ethernet connector. WIZnet W5100S-EVB-Pico
zł55.77
24h
Available quantity: 17
Available
Development board with RP2040 microcontroller. Equipped with a microBUS connector, it can work with Qwiic expansion boards. SprakFun DEV-18721
zł68.83
24h
Available quantity: 3
Available
Game console based on the RP2040 microcontroller from Raspberry Pi. Equipped with a 1.54" LCD display, LiPo battery and aluminum housing. It has API support that allows you to create your own games in C++ and MicroPython. Pimoroni PIM559
zł348.98
4 weeks
No product available!
Camera adapter based on Raspberry RP2040, dedicated to TinyML development. is equipped with a 2.4-inch LCD screen, microphone, camera connectors and an IMU module. It allows you to take photos, use WiFi, SD card and USB mass storage. ArduCam B0432
zł149.00
24h
Available quantity: 2
Available
Base board with soldered Raspberry Pi Pico W module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI-W
zł64.23
24h
Available quantity: 3
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores. The board also has 4 MB of QSPI flash memory. 1.14" LCD module. TTGO T-Display RP2040
zł84.85
24h
Available quantity: 4
Available
Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM686
zł362.44
24h
Available quantity: 2
Available
The RP2350-Plus-M offers the flexibility and performance required in modern embedded projects while maintaining full compatibility with Raspberry Pi Pico and its extensions. Factory-soldered headers and built-in Flash memory make the module suitable for rapid prototyping as well as educational and commercial applications.
zł29.15
24h
Available quantity: 7
Available
Board with the RP2040 microcontroller in the form of a USB dongle. Equipped with edge connectors, RGB LED, boot and reset button. Waveshare RP2040-One
zł22.99
24h
Available quantity: 18
Available
RP2350-USB-A is a versatile development board based on the modern RP2350A microcontroller with a unique dual-core architecture: Arm Cortex-M33 + RISC-V. Thanks to the USB Type-A port supported via PIO, a wide range of interfaces, and a compact form factor, the board is ideal for prototyping peripheral devices, learning programming, and integrating into custom projects as an SMD module.
zł25.37
24h
Available quantity: 26
Available
Board with RP2040 microcontroller and HDMI video connector. Has a built-in LiPo charging circuit and STEMMA QT connector. Allows the use of the Feather module to display data on a monitor. Adafruit 5710
zł85.77
24h
Available quantity: 4
Available
RP2350-Touch-LCD-2.8 is a versatile development platform with a touchscreen and audio functions, designed for projects involving user interfaces, audio playback, motion tracking, and remote communication. It combines the processing power of the RP2350 with a rich set of peripherals and low power consumption, making it ideal for portable, educational, and HMI applications.