Badger 2040 W - module with ePaper display and Raspberry Pi Pico W + accessories
ID: 1188254
769894024102
zł215.19
Tax included
zł174.95 tax excl.
Module with a 2.9" ePaper display and a Raspberry Pi Pico W board equipped with WiFi communication. It has a built-in Qwiic/Stemma QT connector with an I2C interface, buttons and a battery connector. Perfect as a display for a weather station. Pimoroni PIM669
Description
Module with a black and white ePaper display with a diagonal of 2.9". The display is controlled by a Raspberry Pi Pico W board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores operating at a frequency of 133 MHz, 264 kB RAM and 2 MB of external QSPI Flash memory Additionally, the board is equipped with the Infineon CYW43439 system, which extends the board with WiFi wireless connectivity.
The board has 5 user buttons and a Qw/ST connector (Qwiic/STEMMA QT) with an I2C interface, which allows you to connect additional sensors. It is powered by a Micro USB connector or a JST-PH connector using a battery.
The module uses a black and white e-Paper display with a diagonal of 2.9" and a resolution of 296x128 pixels. The built-in controller communicates via the SPI interface. e-Paper displays are characterized by high contrast of the displayed image and consume power only when the displayed content changes. The set includes a battery basket and a strap that allows you to use the module as a pendant. It can be used as an electronic business card, a portable to-do list, or even as part of a weather station.
Features
- Raspberry Pi Pico W
- Dual Arm Cortex M0+ operating at up to 133 MHz with 264 kB of SRAM memory
- 2 MB QSPI flash memory supporting XiP
- Powered and programmable via USB micro-B
- 2.4 GHz WiFi wireless communication
- 2.9" ePaper display with a resolution of 296 x 128 pixels
- 5 user buttons
- Reset and BOOT button
- White LED
- JST-PH connector for battery connection (2.7V to 5.5V)
- USB-C connector for programming and power supply
- Qw/ST connector (Qwiic/STEMMA QT)
- PCF85063A RTC chip
- Dimensions: 85.6 x 48.7 mm
Kit contains
- Badger 2040 module with Raspberry Pi Pico W
- Basket for 2xAAA batteries
- 2 AAA batteries
- Velcro
- Black lanyard
- Micro USB
1188254
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 2 MB
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 85,60 mm
- Width
- 48,70 mm
- USB connector type
- microUSB type B
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM607
zł130.07
24h
Available quantity: 11
Available
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM610
zł154.89
24h
Available quantity: 1
Available
Other products in the same category (16)
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus
zł23.27
24h
Available quantity: 10
Available
RP2350-Touch-LCD-1.28-B is a compact development module with a color touch screen, ideal for projects requiring an HMI interface and mobile integration with sensors. Thanks to the CNC enclosure, the product gains durability and better heat dissipation, making it suitable for prototyping and embedded applications where reliability and elegant design are important. Support for multiple programming languages and extensive technical documentation facilitate rapid development of applications based on ARM and RISC-V architecture.
zł108.22
24h
Available quantity: 4
Available
RP2350-Touch-AMOLED-1.8 with battery is an advanced development board with an AMOLED display, touch support, motion sensors, audio, and a wide range of interfaces. Designed for mobile and embedded applications, it enables the creation of compact interactive devices with full open-source support.
zł129.36
24h
Available quantity: 4
Available
Base board with soldered Raspberry Pi Pico module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI
zł68.11
24h
Available quantity: 10
Available
MicroMod main module with RP2040 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-17720
zł77.32
24h
Available quantity: 2
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
zł16.90
24h
Available quantity: 6
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
zł21.96
24h
Available quantity: 100
Available
Board with RP2040 microcontroller and W6100 network chip. The module is equipped with an Ethernet interface. WIZnet W6100-EVB-Pico
zł55.79
24h
Available quantity: 2
Available
RP2350-Tiny is a minimalist development board based on the RP2350A microcontroller with dual Cortex-M33 and RISC-V architecture, without an integrated USB port. Instead, it features an FPC connector for attaching an external USB-C adapter (not included). The module offers extensive GPIO and peripheral functionality, drag-and-drop programming, support for C/C++ and MicroPython, and SMT mounting capability. It is ideal for embedded projects where minimal space and flexible connectivity are essential.
zł21.55
24h
Available quantity: 10
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. It comes with a USB adapter. Waveshare RP2040-Tiny-Kit
zł26.27
24h
Available quantity: 5
Available
RP2350-Plus without headers is a universal development board designed for developers who prefer surface-mount soldering or custom connector configurations. Thanks to a large number of peripherals, a powerful chip, and full compatibility with the Raspberry Pi Pico, it provides a solid foundation for developing consumer, educational, and professional electronics projects.
zł25.12
24h
Available quantity: 1
Available
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM610
zł154.89
24h
Available quantity: 1
Available
Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM686
zł362.44
24h
Available quantity: 2
Available
RP2350-LCD-1.47-B-M is an advanced yet compact development board designed to work with the RP2350A microcontroller. The integrated LCD display, USB Type-A port, TF card slot, and pre-soldered headers facilitate quick setup and easy integration into various projects. The dual architecture (ARM and RISC-V) provides great flexibility for learning and testing embedded applications, control systems, and IoT devices.
zł48.46
24h
Available quantity: 2
Available
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00052
zł139.00
24h
Available quantity: 23
Available
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM636
zł185.58
24h
Available quantity: 4
Available
Module with a 2.9" ePaper display and a Raspberry Pi Pico W board equipped with WiFi communication. It has a built-in Qwiic/Stemma QT connector with an I2C interface, buttons and a battery connector. Perfect as a display for a weather station. Pimoroni PIM669