RP2040-Plus-M board with RP2040 microcontroller with headers - Waveshare 20808
ID: 588234
5906623422678
zł41.48
Tax included
zł33.72 tax excl.
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus-M
Description
The board is equipped with the RP2040 microcontroller designed by the Raspberry Pi foundation. The system has two ARM Cortex M0+ cores operating at a frequency of 133 MHz and 264 KB of RAM. The microcontroller is not equipped with flash memory, but on the board there is an external memory with a capacity of 4 MB connected via the QSPI interface.
| 1. User LED | 8. RP2040 |
| 2. LiPo charger ETA6096 | 9. MX1.25 battery connector |
| 3. Back Boost DC-DC TPS63000 | 10. Pi Pico connector |
| 4. USB type C | 11. Test points USB |
| 5. BOOT button | 12. Test points BOOT |
| 6. NOR-Flash 4 MB W25Q32JVSSIQ | 13. Test points DEBUG |
| 7. RESET button |
In addition to the RP2040 system and Flash memory, the user has a 3.3 V voltage converter, Boot and Power buttons, a user diode, a USB type-C connector for powering and programming the module and GPIO outputs, on which such peripherals as 12-bit have been led out ADC, PWM inputs, I2C, SPI and UART interface. In addition, the module has a built-in LiPo / Li-Ion charger and a connector for connecting the battery.
The platform supports the popular MicroPython and C/C++ programming languages. Programs can be uploaded to memory via USB interface or via SWD connector. The guide with examples of use is available on the product page.
Comparison table of boards with RP2040 microcontroller
Features
- RP2040 microcontroller designed by Raspberry Pi
- Two ARM Cortex-M0 + cores clocked up to 133 MHz
- 264 kB of onboard SRAM
- DC-DC converter 3.3 V 1800 mA
- Built-in USB-C connector for programming and power
- 26 x multi-functional GPIO pins
- 3 x 12-bit ADC inputs with temperature sensor
- 16 x PWM
- 2 x UART
- 2 x I2C
- 2 x SPI
- Power and Boot buttons
- User LED
- 4 MB external flash memory
- LiPo and Li-Ion charging circuit (ETA6096)
- MX 1.25 connector for the battery
- Supported programming languages: MicroPython and C/C++
- Dimensions: 51 x 21 mm
588234
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 4 MB
- Number of I/O
- 26
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 51mm
- Width
- 21 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.08
24h
Available quantity: 5
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
24h
Available quantity: 25
Available
Cable with USB typ A and USB typ C connectors, compatible with Quick Charge 3.0, cable length 1,8m. LANBERG
zł11.06
24h
Available quantity: 4
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
zł36.56
24h
Available quantity: 4
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
zł29.14
24h
Available quantity: 5
Available
Module with OLED display, 1.3" diagonal and 64x128 px resolution. Communication via SPI or I2C interface. Waveshare Pico-OLED-1.3
zł39.61
24h
Available quantity: 1
Available
Module with 3-color e-Paper display with a diagonal of 2.13" and a resolution of 212x104 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.13-B
zł75.34
24h
Available quantity: 1
Available
Universal board equipped with a metalized hole grid with a pitch of 2.54 mm, enabling mounting using goldpin strips or directly on the surface, with markings facilitating the identification of signals
zł9.90
24h
Available quantity: 401
Available
Other products in the same category (16)
RP2350 Touch LCD 1.85 – Development Board with Round Touch Display (Standard Version) - Waveshare...
Development board based on the RP2350A microcontroller with a 1.85-inch round capacitive LCD touch display at 360 x 360 resolution and 65K colors, supporting ARM Cortex-M33 and RISC-V architectures, designed for user interfaces and embedded systems. Waveshare RP2350-Touch-LCD-1.85C
zł127.62
6 weeks
No product available!
Development board based on the RP2350 microcontroller with a 4.3-inch capacitive touch display 800 x 480, dual-core and dual-architecture support, CAN, RS485 and I2C interfaces, and isolated digital inputs and outputs, designed for control systems and HMI interfaces. Waveshare RP2350-Touch-LCD-4.3B-BOX
zł193.32
6 weeks
No product available!
Development board featuring the RP2350 microcontroller and a 4.3-inch capacitive touch display with 800 × 480 resolution, dual-core and dual-architecture support, designed for HMI interfaces, control systems, and embedded applications. Waveshare RP2350-Touch-LCD-4.3B
zł164.83
6 weeks
No product available!
RP2350 development board with a round 1.46" capacitive IPS touch display 480x480, supporting multi-touch and equipped with IMU sensors, RTC, and a wide range of interfaces. RP2350-Touch-LCD-1.46B Waveshare 32868
zł91.61
6 weeks
No product available!
RP2350 development board featuring a 1.46″ round capacitive IPS touch display with 480×480 resolution, multi-touch support, integrated IMU and RTC sensors, rich peripheral interfaces, and protective cover glass. RP2350-Touch-LCD-1.46 Waveshare 32867
zł100.11
6 weeks
No product available!
RP2350-Touch-LCD-2.1B - Development board with 2.1" round capacitive touch display 480x480 + 2.5D...
Development board based on the RP2350 microcontroller, featuring a 2.1" round IPS display with a resolution of 480 x 480 px, a capacitive touch panel, and an extensive set of peripheral interfaces. Waveshare RP2350-Touch-LCD-2.1B
zł139.69
6 weeks
No product available!
Development board based on the RP2350 microcontroller, featuring a 2.1" round IPS display with 480 x 480 px resolution, a flat capacitive touch panel, and an extensive set of peripheral interfaces. Waveshare RP2350-Touch-LCD-2.1
zł139.69
6 weeks
No product available!
Development board based on the RP2350B microcontroller, featuring a 3.49-inch IPS capacitive touch display with 172 x 640 resolution, supporting ARM Cortex-M33 and RISC-V architectures, with audio interfaces, TF card slot, and a wide range of peripherals. Waveshare RP2350-Touch-LCD-3.49-EN
zł126.75
6 weeks
No product available!
Development board based on the RP2350B microcontroller, featuring a 3.49-inch IPS capacitive touch display with 172 x 640 resolution, supporting ARM Cortex-M33 and RISC-V architectures, with audio interfaces, TF card slot, and a wide range of peripherals, with an 18650 lithium battery included. Waveshare RP2350-Touch-LCD-3.49
zł133.64
6 weeks
No product available!
Development board based on the RP2350B microcontroller with a 4-inch IPS display (480 × 480 px) and a 5-point capacitive touch panel, featuring CAN, RS485, I2C interfaces, RTC, a 6-axis IMU, and a TF card slot. Designed for modern HMI interfaces and multi-touch control systems. Waveshare RP2350-Touch-LCD-4
zł143.64
6 weeks
No product available!
Development board based on the RP2350B microcontroller with a 4-inch IPS display (480×480 px), without touch functionality, featuring CAN, RS485, RTC, IMU, and TF card support. Waveshare RP2350-LCD-4
zł115.08
6 weeks
No product available!
Development board with RP2350 microcontroller and a 7-inch touch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, with a capacitive touch panel. Waveshare RP2350-Touch-LCD-7
zł158.33
24h
Available quantity: 1
Available
Development board with RP2350 microcontroller and a 7-inch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, in a version without touch support. Waveshare RP2350-LCD-7
zł128.94
24h
Available quantity: 3
Available
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE001
zł356.28
4 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE004
zł485.94
4 weeks
No product available!
Educational kit with a 2.8" color TFT IPS display with a resolution of 320 × 240 px and adjustable backlight, ideal for game development, data visualization, and IoT projects. The device is based on the RP2350B microcontroller (2 × Arm Cortex-M33 250 MHz) with 520 KB SRAM, 16 MB QSPI Flash, and 8 MB PSRAM, and connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery charged via USB-C guarantees mobile operation without a constant power supply. Five buttons, an I2C Qwiic/STEMMA QT connector, and MicroPython support make the kit a versatile platform for learning programming and STEM experiments. Pimoroni WARE002
zł356.36
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus-M