List of products by brand SB-Components

The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499

Module with IPS LCD display, 1.14" diagonal and 240x135 px resolution. Communication via SPI interface. SB Components 21741

The module with a 1.3" color IPS LCD display. It has a resolution of 240x240 pixels and a ST7789VM controller. Communication with the module is implemented via SPI interface. SB Components 22632

Prototyping kit dedicated to micro:bit. It offers pin leads, a contact plate, buttons, LEDs and a buzzer. SB Components 22717

A pin expander designed to work with the Raspberry Pi. It provides 2 UART and 8 GPIO interfaces and communicates via the I2C bus. SB Components 14873

Expansion module designed to work with a portable computer built into the Raspberry Pi 400 keyboard. There are two 40-pin connectors on the board in a vertical position. SB Components 21307

Development board equipped with ESP32-S3-WROOM-1 module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the ESP32 microcontroller. It can be programmed with Arduino, ESP-IDF, MicroPython and CircuitPython. SB Components 26647

Module with barcode and QR scanner designed for Raspberry Pi. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. SB Components 22595

Module with round 1.28" IPS LCD display and 240x240 px resolution and RP2040 chip. SB Components 24018

Pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of 2x20 pin male strips. SB Components 20836

Universal module dedicated to e-Paper displays. It is equipped with connectors compatible with the Raspberry Pi Pico. It allows you to connect a display through one of the two FPC sockets. SB Components 26241

USB-UART/I2C converter based on the MCP2221 chip. It enables communication of devices with UART or I2C interface with a computer. SB Components 21246

A small module with a 1.54" LCD display and a resolution of 240x240 pixels, equipped with an RP2040 microcontroller. It is programmed via a USB type C connector. SB Components 25619

Open source USB dongle that allows you to work with the LoRa network. It allows you to communicate with a range of up to 5 km and has a built-in 1.14-inch LCD display. SB Components 23011

LoRa module operating at 433 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23233

Prototyping kit dedicated to Raspberry Pi. It offers GPIO pin leads, a breadboard, buttons, LEDs and a buzzer. SB Components 11605

Module with a round 1.28" IPS LCD display and a resolution of 240x240 px. Communication is via the SPI interface. SB Components 21451

The board with the RP2040 microcontroller, which provides a set of 2x20-pin connectors to which you can connect the HATs of the Raspberry Pi. SB Components 24032

2-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 14088

Module with round 1.28" IPS LCD display and 240x240 px resolution and ESP-12E chip. SB Components 24025