Pico Zero Board - prototype board for Raspberry Pi Pico

Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366

1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277

Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628

8-channel module with relays designed to work with the Raspberry Pi Pico. Has built-in power isolation. Perfect for industrial applications. Waveshare Pico-Relay-B

The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver

Module with a precise clock RTC DS3231 dedicated to the Raspberry Pi Pico. Communication via the I2C interface. SB Components 21420

Keyboard module designed for Raspberry Pi Pico. It is equipped with 16 buttons with RGB backlight. Pimoroni PIM551

A motor controller for the Raspberry Pi Pico, capable of supporting two DC motors or one stepper motor and connecting up to eight servos. Each motor channel offers up to 1 A of current, and built-in overload protection protects the system. The board features additional GPIO pins, analog inputs, and 3V and GND connectors for project expansion. Kitronik 5348

Module with the driver of motors TB6612FNG and driver PWM PCA9685 for Raspberry Pi Pico. It allows you to control the movement of 4 DC motors. Waveshare Pico-Motor-Driver

Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Pimoroni PIM630

Board with prototype holes dedicated to Raspberry Pi Pico. It offers an 8x20 hole area with a pitch of 2.54 mm with marked pin labels and a reset button and STEMMA QT connector. Adafruit 5200

The module with screw connectors is dedicated to the Raspberry Pi Pico boards. It allows you to easily create prototypes, ensuring a stable connection of wires with the board. DFRobot DFR0924

Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468

Shield with two relays for Raspberry Pi Pico, provides control of devices up to 250 VAC/3 A or 30 VDC/3 A, equipped with LEDs indicating the status of the relays and opto-isolation, ideal for home automation and other DIY projects

Expansion module with audio and video outputs dedicated to Raspberry Pi Pico boards. It has a VGA output, SD card slot, audio outputs and control buttons. Pimoroni PIM553

Audio module with DAC and headphone amplifier designed to work with the Raspberry Pi Pico. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM544