- Out-of-Stock
Robotic Claw - MKII, SparkFun
ID: 201312
ROB-11524
Description: This robotic claw is a step up from the classic. The MKII takes everything you loved about the standard robot claw from DAGU and makes some significant improvements!
Just like the classic claw, they are made from metal and are pretty heavy-duty, but the MKII also features brass sleeves in the joints which make them more rigid and less likely to come loose. The claw opens to about 2" and depending on the servo motor used, it can pick up some relatively heavy objects. The new spring-loaded clutch helps protect your servo gears from damage and also increases the gearing to 2:1, allowing the servo to act over its entire range and provide more gripping power!
These also have a mounting plate on the bottom which accepts standard spacing found on servo mounts (the extra bits that come with our servo motors). These do not come with a servo motor, so check below, the ‘micro servo’ is the one that works well.
Documents:
- Dimensional Drawing
- Assembly Diagram
- Assembly Instructions (Large File)
201312
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with 4 relays controlled by the I2C interface. Each relay can switch currents up to 40 A at 28-380 V AC. SparkFun KIT-16833
Retired
No product available!
ActivePresenter is a handy tool for creating interactive e-learning training, quizzes, software simulations or even educational games
Retired
No product available!
A small USB-UART TTL converter module based on the CH340N chip with a microUSB connector. Equipped with a LED indicating power.
Retired
No product available!
16-channel logic analyzer with a maximum sampling frequency of 100 MHz. It can decode data under most popular communication protocols. Works with Windows systems. LA1016
Retired
No product available!
USB camera module with a resolution of 8 MP based on a Sony IMX179 1/3.2" matrix compatible with UVC. It has a variable focal length adjustable in the range from 2.8 to 12 mm. Equipped with a CS mount lens with an integrated UV filter. ArduCAM UB0226
Retired
No product available!
The evaluation kit is equipped with the Lattice iCE40 HX FPGA chip. The kit is supported by iCEcube2 and Verilog and Lucid languages. SparkFun DEV-16526
Retired
No product available!
Handheld thermal imaging camera with a 3.2" LCD display. It measures the temperature in the range from -20 to 300°C with an accuracy of 2°C. HTI HT-19
Retired
No product available!
A hand-held thermal imaging camera with a 2.4 "LCD screen. It measures the temperature in the range from -20 to 300°C. HTI HT-02
Retired
No product available!
Handheld thermal imaging camera with a 2.8" LCD display. It measures the temperature in the range from -20 to 300°C with an accuracy of 2°C. HTI HT-04
Retired
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. The camera has a FoV 100° lens with M12 mount. ArduCAM B0245
Retired
No product available!
Camera module with a resolution of 2 MP equipped with an image sensor AR0230. The camera has a FoV 90° lens with M12 mount. ArduCAM B0247
Retired
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. The camera has a FoV 60° lens with M12 mount. ArduCAM B0248
Retired
No product available!
L76X GNSS receiver module . It can receive data from GPS, BDS and QZSS systems. It uses a UART interface and offers an accuracy of up to 2.5 meters. Waveshare L76X GPS Module
Retired
No product available!
Lens Mount Adapter for Canon EOS Lens to C-Mount, Compatiable with All EF, EF-S Lens to Raspberry Pi HQ Camera. ArduCAM UB0228
Retired
No product available!
The functional/arbitrary generator allows you to generate sinusoidal, square and ramp signals or add noise to the signal. It provides modulations such as AM, PM, FM, ASK, FSK. Equipped with a transparent 4.3" LCD display and USB interface. Uni-T UTG1010A
Retired
No product available!
Programmable, linear laboratory power supply with adjustable supply voltage up to 30V and current up to 5A. The power supply has two 30V/5A output channels and one 5V/3A channel. Equipped with a USB and RS-232 interface. Uni-T UTP3305C
Retired
No product available!
ROB-11524