RangePi - USB dongle with LoRa 868MHz communication

IoT development kit with STM32WLE5JC chip that connects microcontroller with ARM Cortex-M4 core and LoRa SX126X module. It has all the pins of the LoRa-E5 module, I2C, SPI, UART, RS485 interfaces and an external antenna. Seeed Studio 113990934

Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT

LoRa radio module with 433 MHz operating frequency. Communication takes place via the SPI serial interface. It is supplied with the voltage of 3.3 V

Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT

Module with the SX1276 868 MHz system for LoRa communication, designed for FireBeetle boards. It communicates via the SPI interface. DFRobot TEL0125

Solar-powered communication node integrating LoRa, GPS and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel and four 18650 batteries, which ensures reliable operation even in limited sunlight and makes it ideal for field work. Thanks to its long range (up to 8-9 km), support for many navigation systems and the possibility of expansion via the Grove interface, the P1-Pro will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993633

Compact GPS locator in the shape of a credit card. Equipped with GPS, Bluetooth and Wi-Fi, it ensures smooth positioning both indoors and outdoors. It not only offers location tracking, but also monitors parameters such as temperature, brightness and movement. Seeed Studio 114993073

Adafruit Feather 32u4 RFM95 is a development board with built-in ATmega32u4 AVR microcontroller (8MHz, 32kB Flash, 2kB RAM) and RFM95W module enabling wireless communication in the 868 MHz or 915 MHz band. The board is compatible with Arduino IDE. Adafruit 3078

Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT

A comprehensive development kit for creating mobile and energy-efficient LoRa® devices with GPS support and environmental sensors. The kit includes a development board with nRF52840 and Semtech LR1110, an Air530 GPS module and a 0.96” OLED display, ready to work with Meshtastic software. With support for Bluetooth 5.3, Zigbee, Thread and four Grove connectors, the kit offers extensive expansion possibilities and full freedom to design independent communication and location systems. Seeed Studio E24070201

Development kit with SAMD21G18 microcontroller with ARM Cortex M0 core and LoRa RFM95 868/915 MHz radio communication module. Adafruit 3178

LoRaWAN SX1303 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1303 868M LoRaWAN Gateway (B)

M5Stack U111-B is an evaluation board with SIM7020G module, which supports NB-IoT and LTE Cat-NB communication, ideal for IoT applications requiring low power consumption. With support for TCP/IP, UDP and MQTT protocols and wide frequency range, the module provides reliable connectivity in different regions and remote monitoring applications

IoT development board with STM32WLE5JC chip that connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. It has all the pins of the LoRa-E5 module and an external antenna. Seeed Studio 113990939

LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116

STM32 Nucleo starter pack for LoRa technology. It consists of two development kits: NUCLEO-L073RZ and NUCLEO-F746ZG and expansion modules for communication within LoRa: LRWAN_NS1 and LRWAN_GS_LF1. STMicroelectronics P-NUCLEO-LRWAN3