zł151.94 tax excl.
An expansion module for the Wio Terminal development board, which features LoRa-E5 and Quectel L76-LB modules to provide LoRaWan and GNSS network communication. It allows the construction of compact IoT projects. Seeed Studio 114992728
An expansion module for the Wio Terminal development board that features LoRa-E5 and Quectel L76-LB modules to provide LoRaWan and GNSS communications. The STM32WLE5JC LoRa-E5 is the world's first combination of LoRa RF and MCU in a single chip. It uses an ARM Cortex-M4 core and a Semtech SX126X LoRa chip, and supports both LoRaWAN and LoRa protocols on a worldwide frequency and (G)FSK, BPSK, (G)MSK and LoRa modulations. The Quectel L76-LB GNSS module supports simultaneous reception of GPS, GLONASS, BeiDou and QZSS. With 33 tracking channels, 99 acquisition channels and 210 PRN channels, it can receive and track any combination of GPS, GLONASS (or BeiDou) and SBAS signals. The Wio Terminal Chassis, in combination with the Wio Terminal board, allows the construction of compact IoT projects.
Manufacturer
Responsible person
Development kit based on ATSAMD51 with WiFi and BLE 5.0. It is equipped with a 2.4-inch LCD screen, IMU (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor and infrared transmitter (IR 940nm). Seeed Studio 102991299
Power supply module with a 650 mAh battery for the Wio Terminal set. Seeed Studio 103990564
LoRaWan and LongFi network monitor. It allows you to specify the number of hotspots to extend the actual network coverage. Seeed Studio 114992777
An IoT platform based on the nRF52840 chip and the Semtech LR1121 transceiver, enabling LoRa and LoRaWAN communication in the 868/915 MHz and 2.4 GHz bands. The module offers high receiver sensitivity of up to -141 dBm, enabling communication distances of up to approximately 15 km. Support for multiple interfaces, such as GPIO, ADC, I2C, and UART, and compatibility with the Crowtail ecosystem, enables easy integration with sensors and rapid prototyping. Elecrow LMM15121D
A multi-functional device combining a 7000 mAh power bank with LoRa communication based on the Meshtastic protocol, enabling the creation of a decentralized mesh network without internet access. Equipped with a Semtech LR1110 module, an nRF52840 microcontroller, and built-in GPS supporting multiple navigation systems, it allows for messaging and real-time location sharing. It offers fast charging up to 22.5W, PD, QC, and PPS support, and MagSafe-compatible wireless charging. Elecrow LMM14004D1
No product available!
A wireless communication module designed for IoT systems and applications requiring long-range data transmission. Based on the Semtech SX1262 chip, it supports LoRa, (G)FSK, and GMSK modulations in the 850–930 MHz band, offering a maximum transmit power of 22 dBm and very high receiver sensitivity of up to -148 dBm. With a link budget of up to 170 dB, it enables communication over distances of typically 6–7 km, and up to approximately 15 km under favorable conditions. The module communicates with a microcontroller via an SPI interface, features very low power consumption in sleep mode (1.62 µA), and a compact size of 10 x 10 mm, facilitating integration in embedded devices and battery-powered systems. Elecrow CIL13262L
A wireless communication module designed for IoT systems and applications requiring long-range transmission. Based on the Semtech LLCC68 chip, it supports LoRa and (G)FSK modulations in the 850–930 MHz band, offering a maximum transmit power of 22 dBm and a receiver sensitivity of up to -129 dBm. With a link budget of up to 151 dB, it enables communication over distances of up to 5–6 km, and even up to 10 km under favorable conditions. The module communicates with a microcontroller via an SPI interface, features very low power consumption in sleep mode (1.62 µA), and has a compact size of 10 x 10 mm, facilitating integration in embedded devices. Elecrow CIL13368L
ThinkNode M2 Meshtastic (LoRa) enables long-range communication using LoRa technology and Meshtastic firmware. The device is equipped with an ESP32-S3 microcontroller, an SX1262 LoRa module, a 1.3-inch OLED display with 128 × 64 px resolution, 2.4 GHz WiFi, Bluetooth 5.0 Low Energy, and a USB Type-C connector. The transceiver is compatible with the Meshtastic App, also supports MeshCore firmware, and is suitable for emergency communications, mesh networking, and IoT applications. Elecrow ThinkNode M2 Meshtastic (LoRa)
Multi-protocol wireless communication module combining the Nordic nRF52840 microcontroller with the Semtech LR1110 transceiver. Supports LoRa / LoRaWAN in the 850 MHz to 930 MHz band, Bluetooth Low Energy, Thread, Zigbee and NFC, as well as GNSS and WiFi-based positioning functions. Offers up to +21 dBm transmit power, sensitivity down to -141 dBm and a communication range exceeding 10 km under suitable conditions. Elecrow CIL13510X
8-channel LoRaWAN concentrator module based on the Semtech SX1302 chipset with an SPI interface, designed for building IoT gateways. Operates in the US915 frequency band (902-928MHz), supports 125, 250 and 500kHz channel bandwidths, and provides receiver sensitivity down to -139dBm and transmit power up to 25dBm. Equipped with a 52-pin mini-PCIe connector and two U.FL antenna connectors. Radio transmission within the EU is subject to restrictions under applicable national regulations. Elecrow CRT01266M003
Wireless communication module for IoT devices combining a dual-core ESP32-S3R8 microcontroller with an SX1262 LoRa transceiver; supports LoRaWAN in EU868 and US915 bands, 2.4 GHz WiFi and Bluetooth LE 5.0; 16 MB Flash and 8 MB PSRAM; LoRa output power up to 20.9 dBm; sensitivity down to -137 dBm; IPEX antenna connector; 3.0-3.6 V supply voltage; 38-pin SMT package; dimensions 21.6 x 16.5 x 3.3 mm. Seeed Studio 100020327
Multi-band Wio-LR2021 RF transceiver module based on the Semtech LR2021 chip, designed for wireless communication in the 863-928 MHz Sub-GHz and 2.4 GHz ISM bands. Supports LoRa, FLRC, (G)FSK, (G)MSK, 4-FSK, O-QPSK, and LR-FHSS modulation schemes, enabling data transmission at up to 2.6 Mbps in FLRC mode. Offers receiver sensitivity down to -141.1 dBm, transmit power up to +22 dBm, and current consumption of 583 nA in deep sleep mode. Equipped with an SPI interface and 22 SMT terminals, it operates with a supply voltage of 1.8 V to 3.7 V. Designed for IoT devices, LPWAN networks, telemetry systems, and tracking applications. Tape Reel version for surface mounting. Seeed Studio 100058045
No product available!
Portable development device based on the ESP32-S3 microcontroller combines an SX1262 868 MHz LoRa transceiver, a 2.8" IPS color display, a full QWERTY keyboard, and a trackball controller in a compact enclosure. Factory-installed LILYGO Factory Firmware allows immediate use without manually flashing the base firmware. The package includes an 868 MHz LoRa FPC antenna, a power cable, and a 1×6 pin header. The device is designed for LoRa communication terminals, portable messaging devices, IoT projects, and custom applications based on the ESP32-S3 microcontroller. LILYGO TTGO T-Deck 868 MHz Black LILYGO Factory Firmware
No product available!
Portable LoRa device based on the nRF52840 microcontroller combines an SX1262 868 MHz LoRa transceiver, a 1.54" E-Paper display, an L76K GNSS positioning module, and a BME280 environmental sensor in a compact ABS enclosure with a built-in 850 mAh battery. Factory-installed Meshtastic firmware allows immediate deployment in mesh networks without manually flashing the software. The kit includes an 868 MHz LoRa antenna and a USB Type-C cable. The device is designed for autonomous mesh nodes, long-range communication, GPS positioning, and mobile IoT applications. LILYGO TTGO T-Echo 868 MHz BME280 Meshtastic Firmware
No product available!
A development board based on the ESP32 microcontroller that combines an SX1278 LoRa transceiver, a 0.96" OLED display, and a microSD card slot in a single compact design. Preloaded with Disaster-Radio firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a 433 MHz LoRa antenna, a JST 2-pin power cable, and pin headers for soldering. The board is designed for autonomous communication devices, mesh network nodes, and IoT applications. LILYGO TTGO T3 LoRa32 V1.6.1 Disaster-Radio 433 MHz
No product available!
An ESP32-based development board that combines a LoRa communication module, NEO-6M GPS receiver, and a 0.96" OLED display in a single device. Preloaded with Meshtastic firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a non-soldered 0.96" OLED display, a 433 MHz LoRa antenna, and pin headers for self-assembly. The board is suitable for building autonomous mesh network nodes, GPS trackers, and battery-powered IoT devices using a 18650 Li-Ion cell or a microUSB power supply. LILYGO TTGO T-Beam Meshtastic 433 MHz Non-Soldered OLED
The ThinkNode G1 indoor gateway receives data from LoRaWAN end devices operating in the EU868 frequency band and forwards it to a network server via WiFi, Ethernet, or 4G LTE. It features an 8-channel Semtech SX1302 concentrator combined with a MediaTek MT7628N processor, 128 MB DDR2 RAM, and 32 MB Flash memory. The gateway supports LoRaWAN Class A, B, and C devices, The Things Network (TTN), ChirpStack, and built-in LoRaWAN network server functions. Equipped with a 10/100 Mbps Ethernet port, USB Type-C, microSD slot, Nano SIM slot, and RP-SMA antenna connectors, it is designed for IoT deployments in smart buildings, agriculture, industrial automation, and environmental monitoring. Elecrow ThinkNode G1 Global 4G
No product available!
Open-source LoRa USB adapter based on the CH341A and Semtech SX1262 chips, designed to turn Linux or macOS devices into Meshtastic network nodes. Supports EU868 and US915 bands, an external SMA antenna and Web UI management. Powered directly from the USB port with no additional power supply required. Elecrow LMM15202D
Portable communication terminal for MeshCore networks, equipped with an ESP32-S3, Semtech LR1110 LoRa transceiver, 2.4" color LCD and physical QWERTY keyboard. It supports the EU868 band, 2.4 GHz WiFi, Bluetooth 5.0 and GNSS positioning using GPS, BeiDou, Galileo and GLONASS. A built-in 2300 mAh Li-Po battery, 16 GB of storage and preinstalled MeshCore firmware allow standalone operation without a smartphone. Elecrow ThinkNode M9 MeshCore EU868
An expansion module for the Wio Terminal development board, which features LoRa-E5 and Quectel L76-LB modules to provide LoRaWan and GNSS network communication. It allows the construction of compact IoT projects. Seeed Studio 114992728