.png)
ThinkNode M2 Meshtastic (LoRa) - LoRa Transceiver with ESP32-S3 and 1.3" OLED Display - Without Battery
ID: 1207020
5902186339606
zł112.90
Tax included
zł91.79 tax excl.
ThinkNode M2 Meshtastic (LoRa) enables long-range communication using LoRa technology and Meshtastic firmware. The device is equipped with an ESP32-S3 microcontroller, an SX1262 LoRa module, a 1.3-inch OLED display with 128 × 64 px resolution, 2.4 GHz WiFi, Bluetooth 5.0 Low Energy, and a USB Type-C connector. The transceiver is compatible with the Meshtastic App, also supports MeshCore firmware, and is suitable for emergency communications, mesh networking, and IoT applications. Elecrow ThinkNode M2 Meshtastic (LoRa)
Description
The ThinkNode M2 device enables the creation of local communication networks based on LoRa technology and the open-source Meshtastic firmware, allowing message exchange without Internet access or cellular network coverage. Built around the ESP32-S3 microcontroller and the SX1262 radio transceiver, the device supports EU868 MHz and US915 MHz frequency bands for long-range wireless communication. It is intended for outdoor applications, emergency communications, monitoring systems, IoT projects, and distributed mesh networks.
LoRa, WiFi, and Bluetooth Connectivity
ThinkNode M2 is based on the ESP32-S3 module featuring a dual-core Xtensa LX7 processor running at up to 240 MHz, 512 KB SRAM, 8 MB PSRAM, and 4 MB Flash memory. LoRa communication is handled by the SX1262 transceiver, while additional connectivity is provided by 2.4 GHz WiFi IEEE 802.11 b/g/n and Bluetooth 5.0 Low Energy.
The device comes with Meshtastic firmware pre-installed, allowing immediate operation, and also supports MeshCore firmware.
Communication Without Network Infrastructure
The device is compatible with the official Meshtastic App, allowing users to configure device parameters, exchange messages, share locations, monitor network status, and export collected data.
LoRa technology enables the creation of distributed mesh networks operating independently of cellular infrastructure, making ThinkNode M2 suitable for outdoor activities, emergency response, community communications, fleet management, and experimental IoT projects.
Display and Hardware Overview
The device features a 1.3-inch OLED display with a resolution of 128 × 64 pixels, providing real-time information about device status and communication. The enclosure includes a USB Type-C connector, Power, Function, Reset, and BOOT buttons, as well as LED indicators for power and charging status. Internally, the device provides an IPEX antenna connector, a battery connector, and a power management unit.
Main hardware features:
- communication — LoRa, 2.4 GHz WiFi, and Bluetooth 5.0 LE
- display — 1.3-inch OLED, 128 × 64 px
- configuration — Meshtastic App
- power supply — USB Type-C, 5 V / 1 A
- controls — Power, Function, Reset, and BOOT buttons
The manufacturer provides a Wiki, User Manual, and technical documentation containing information about device configuration, firmware installation, and technical specifications.
The ThinkNode M2 device can be integrated into custom projects thanks to its modular design and compact dimensions. The enclosure measures 88.4 × 46 × 23 mm, making the device easy to carry, while the operating temperature range of -10°C to 50°C allows use in outdoor and industrial environments. Without Battery version.
Features
- Processor and Memory
- ESP32-S3 microcontroller with dual-core Xtensa LX7 processor running at 240 MHz
- SRAM: 512 KB
- PSRAM: 8 MB
- Flash memory: 4 MB
- ROM: 384 KB
- Meshtastic firmware pre-installed
- MeshCore firmware support
- Display
- Display size: 1.3"
- Display type: OLED
- Resolution: 128 × 64 px
- Display driver: SSH1106
- Wireless Communication
- SX1262 LoRa module
- Supported frequency bands: EU868 MHz / US915 MHz
- WiFi IEEE 802.11 b/g/n, 2.4 GHz
- Bluetooth 5.0 Low Energy
- Compatible with the Meshtastic App
- Connectors and Hardware
- USB Type-C connector
- Internal IPEX antenna connector
- Internal battery connector
- Power button
- Function button
- Reset button
- BOOT button
- Power LED
- Charging LED
- Built-in buzzer
- Power Management Unit (PMU)
- USB-to-UART converter
- Power Supply
- Supply voltage: 5 V DC
- Recommended power supply: 5 V / 1 A
- Powered via USB Type-C
- Without Battery version
- Mechanical and Environmental Specifications
- ABS enclosure
- Dimensions: 88.4 × 46 × 23 mm
- Weight: 50 g
- Operating temperature: -10°C to 50°C
- Storage temperature: -20°C to 60°C
- Relative humidity: 10%–95% (non-condensing)
Kit includes
- ThinkNode M2 Meshtastic (LoRa) Signal Transceiver (Without Battery)
- USB-A to USB Type-C cable
1207020
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
Compact and energy-efficient Meshtastic, MeshCore node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers ready-to-go operation without programming, power supply from USB-C, solar panel or battery (built-in 2000mAh battery), and a 1.3" OLED display for real-time monitoring. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it is a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993649
zł237.71
4 weeks
No product available!
Solar-powered communication node integrating LoRa modules and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel, which makes it ideal for field work. Thanks to its long range (up to 8-9 km) and the possibility of expansion via Grove interface, P1 will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993643
zł345.00
24h
Available quantity: 8
Available
Compact and energy-efficient solution combining Bluetooth 5.0 and LoRa (862–930 MHz), ideal for IoT projects requiring long range and low power consumption. It uses the XIAO nRF52840 MCU with Cortex-M4 core and support for multiple interfaces and the LoRa SX1262 module for reliable wireless communication. The kit is perfect for applications such as Meshtastic, asset tracking, sensor networks or educational projects. Seeed Studio 102010710
zł74.38
24h
Available quantity: 89
Available
A comprehensive development kit for creating mobile and energy-efficient LoRa® devices with GPS support and environmental sensors. The kit includes a development board with nRF52840 and Semtech LR1110, an Air530 GPS module and a 0.96” OLED display, ready to work with Meshtastic software. With support for Bluetooth 5.3, Zigbee, Thread and four Grove connectors, the kit offers extensive expansion possibilities and full freedom to design independent communication and location systems. Seeed Studio E24070201
zł246.69
4 weeks
No product available!
Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers ready-to-go operation without programming, powered by USB-C, solar panel or battery. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it proves to be a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993653
zł142.78
24h
Available quantity: 5
Available
Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers a ready-to-use, no-programming, power supply from USB-C, solar panel or battery, and a 1.3" OLED display for real-time monitoring. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it is a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993648
zł159.48
24h
Available quantity: 12
Available
Solar-powered communication node integrating LoRa, GPS and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel and four 18650 batteries, which ensures reliable operation even in limited sunlight and makes it ideal for field work. Thanks to its long range (up to 8-9 km), support for many navigation systems and the possibility of expansion via the Grove interface, the P1-Pro will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993633
zł469.00
24h
Available quantity: 12
Available
Dual-band LoRa communication module based on the LR1121 transceiver, supporting Sub-GHz 410-510MHz and 2.4GHz bands, with SPI interface, AES-128 encryption and integrated TCXO. LF version with pre-soldered pin headers. Waveshare Core1121-LF-M
zł52.16
6 weeks
No product available!
Dual-band LoRa communication module based on the LR1121 transceiver, supporting Sub-GHz 410-510MHz and 2.4GHz bands, with SPI interface, AES-128 encryption and integrated TCXO. LF version without pre-soldered pin headers, intended for soldered mounting. Waveshare Core1121-LF
zł48.18
6 weeks
No product available!
Dual-band LoRa communication module based on the LR1121 transceiver, supporting Sub-GHz 850-930MHz and 2.4GHz bands, with SPI interface, AES-128 encryption and an integrated TCXO oscillator. HF version with pre-soldered pin headers. Waveshare Core1121-HF-M
zł52.16
6 weeks
No product available!
Dual-band LoRa communication module based on the LR1121 transceiver, supporting Sub-GHz 850–930 MHz and 2.4 GHz bands, featuring SPI interface, AES-128 encryption, and an integrated TCXO. HF version without pre-soldered pin headers, intended for soldered mounting. Waveshare Core1121-HF
zł48.18
6 weeks
No product available!
Seeed Studio 114993187 is an LPWAN Asset Tracker development kit based on the Wio-WM1110 module, supporting the Amazon Sidewalk network. With integrated GNSS, Wi-Fi, and Bluetooth, it enables precise asset tracking, while built-in sensors and compatibility with Grove modules provide extensive capabilities for IoT applications and monitoring systems.
zł144.82
24h
Available quantity: 5
Available
WM1302 LoRaWAN Gateway Module (USB) US915 Seeed Studio 114992991 is a LoRaWAN gateway module in mini-PCIe format based on the SX1302 chip, intended for operation in the US915 band. Thanks to the USB interface, high sensitivity, and low power consumption, it is used in the design of energy-efficient LPWAN gateways and in research on long-range communication.
zł156.06
4 weeks
No product available!
Wio-WM1302 LoRaWAN Gateway Module (SPI) US915-M Seeed Studio 114992969 is a mini-PCIe format module based on the SX1302 chip, designed for building LoRaWAN gateways in the US915 band. Thanks to its low power consumption, high sensitivity, and SPI interface, it is well suited for IoT and M2M applications requiring reliable long-range communication.
zł124.86
4 weeks
No product available!
This development board combines Wi-Fi, Bluetooth, and LoRa technologies, ideal for IoT projects requiring long-range communication. Equipped with a dual-core 240 MHz processor and an 868 MHz SX1262 modem, it provides a transmission range of up to several kilometers with low power consumption. It features a built-in 0.96-inch OLED display, a CP2102 USB-to-UART converter, and a lithium battery charging circuit for mobile operation. Heltec Lora32-V3 868MHz
zł109.43
4 weeks
No product available!
A mobile LoRa transceiver compatible with Meshtastic and MeshCore, equipped with GPS supporting GPS, GLONASS, BeiDou, and QZSS. The device utilizes a powerful ESP32-S3 microcontroller and SX1262 transceiver, ensuring stable, long-range communication in the 868 MHz band. The 1.54" EPD screen allows for convenient data display with very low power consumption, and the 1200 mAh battery ensures long operation in the field. Elecrow ThinkNode M5 Walkie-Talkie
zł276.00
24h
Available quantity: 29
Available
ThinkNode M2 Meshtastic (LoRa) enables long-range communication using LoRa technology and Meshtastic firmware. The device is equipped with an ESP32-S3 microcontroller, an SX1262 LoRa module, a 1.3-inch OLED display with 128 × 64 px resolution, 2.4 GHz WiFi, Bluetooth 5.0 Low Energy, and a USB Type-C connector. The transceiver is compatible with the Meshtastic App, also supports MeshCore firmware, and is suitable for emergency communications, mesh networking, and IoT applications. Elecrow ThinkNode M2 Meshtastic (LoRa)