TTGO T-Beam V1.1 - IoT development board with ESP32 and LoRa 868MHz module
ID: 584211
5906623461448
zł255.85
Tax included
zł208.01 tax excl.
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
Description
A development board designed for IoT projects, equipped with a WiFi/Bluetooth ESP32 module with a 3D antenna and a LoRa communication module operating at 868 MHz. In addition, the board has GPS NEO-6M with a positioning accuracy of up to 3 m. On the bottom of the board there is a basket for a Li-Ion type 18650 battery, which is managed by a circuit with the TP5400 system, which allows you to charge the batteries with a current of up to 1 A. This selection of components and small dimensions make the board ideally suited to the design of devices in the area of the Internet of Things.
Features
- ESP32
- WiFi and Bluetooth communication
- 4 MB Flash
- 4 MB PSRAM
- Antenna
- LoRa
- Frequency band: 868 MHz
- Transmit power: + 20dbm
- Reception sensitivity:
- 139dBm @ LoRa and 62.5Khz and SF = 12 and 146bps
- 136dBm @ LoRa and 125Khz and SF = 12 and 293bps
- 118dBm @ LoRa and 125Khz and SF = 6 and 9380bps
- 123dBm @ FSK and 5Khz and 1.2kb / s
- FIFO 64 B
- Data transfer rate: 1.2K ~ 300kb/s @ FSK, 0.018K ~ 37.5kb/s @ LoRa
- Modulation Mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK
- Interface: SPI
- Automatic frequency correction
- Automatic gain control
- Operating voltage: 1.8 to 3.7V
- Current consumption: up to 120 mA
- GPS NEO-6M
- Interface: UART (baudrate 9600)
- Receiving band: L1 (1575.42MHz)
- Positioning accuracy: 3 m
- Drift: <0.02 m/s
- Reference system: WGS-84
- Maximum altitude: 18,000 m
- Maximum speed: 515 m/s
- Acceleration: <4g
- Tracking sensitivity: -161 dBm
- Acquisition sensitivity: -148 dBm
- Average "cold start" time: 38 seconds
- Average "warm start" time 35 seconds
- Hotstart time: 1 sec
- Average recovery time: 0.1 seconds
- Ceramic antenna
- Working voltage: 3 to 5V
- Li-Ion 1 A battery charging circuit
- Charging status LEDs
- MicroUSB connector
Kit contains
- TTGO T-Beam V1.1 module
- 868 MHz antenna
- 2 x straight goldpin 13-pin connector
584211
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2
zł245.39
Delivery date unknown
No product available!
Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO
Regular pricezł90.49zł70.74
24h
Available quantity: 3
Available
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 2500 mAh. Samsung INR18650-25R
zł23.99
24h
Available quantity: 100
Available
Other products in the same category (16)
Development kit with SAMD21G18A microcontroller with ARM Cortex M0+ core and LoRa RFM95W radio communication module. SparkFun WRL-15836
zł164.81
24h
Available quantity: 1
Available
Development board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506
zł361.48
3 weeks
No product available!
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
zł255.85
4 weeks
No product available!
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. Designed for surface mounting. Seeed Studio 317990687
zł39.61
24h
Available quantity: 8
Available
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091
zł94.33
24h
Available quantity: 4
Available
IoT development board with STM32WLE5JC chip that connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. It has all the pins of the LoRa-E5 module and an external antenna. Seeed Studio 113990939
zł111.91
4 weeks
No product available!
IoT development kit with STM32WLE5JC chip that connects microcontroller with ARM Cortex-M4 core and LoRa SX126X module. It has all the pins of the LoRa-E5 module, I2C, SPI, UART, RS485 interfaces and an external antenna. Seeed Studio 113990934
zł142.90
24h
Available quantity: 7
Available
LoRa radio module with 433 MHz operating frequency. Communication takes place via the SPI serial interface. It is supplied with the voltage of 3.3 V
zł14.69
24h
Available quantity: 15
Available
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M
zł64.67
24h
Available quantity: 10
Available
Function module designed for MicroMod boards. It allows you to add LoRa and LoRaWAN wireless communication in the 915 MHz frequency band to the project. SparkFun DEV-18573
zł245.27
24h
Available quantity: 1
Available
Core1262-HF is an advanced LoRa module operating in the 850–930 MHz band, combining high energy efficiency, strong transmission power, and interference resistance. With support for LoRa/LoRaWAN standards and available development resources, it is ideal for use in industrial automation, smart home systems, and Sub-GHz IoT projects.
zł30.27
24h
Available quantity: 33
Available
The expansion board with the LoRa E22-400T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 21642
zł262.49
24h
Available quantity: 1
Available
The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628
zł258.87
24h
Available quantity: 1
Available
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare Pico-LoRa-SX1262-433M
zł64.03
24h
Available quantity: 9
Available
Open source USB dongle that allows you to work with the LoRa network. It allows you to communicate with a range of up to 5 km and has a built-in 1.14-inch LCD display. SB Components 23004
zł212.21
24h
Available quantity: 2
Available
Open source USB dongle that allows you to work with the LoRa network. It allows you to communicate with a range of up to 5 km and has a built-in 1.14-inch LCD display. SB Components 23011
zł252.43
24h
Available quantity: 2
Available
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1