Pico-LoRa-SX1262-868M expansion board with LoRa 868 MHz module for Raspberry Pi Pico - Waveshare 20682
ID: 587715
5906623426058
zł63.71
Tax included
zł51.80 tax excl.
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M
Description
The expansion board with the LoRa SX1262 module is designed for the Raspberry Pi Pico. The system supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. The user can connect an external antenna via the IPEX connector. In addition, the board has a connector for a LiPo battery and the MCP73831 charging system, thanks to which you can easily create a portable device. The charging status is indicated by the LED diode, and the power button allows you to conveniently turn the power on and off. The module is connected to the Raspberry Pi Pico via a dedicated connector. The manufacturer has prepared numerous examples in C for the set. Full documentation is available on the product Wiki page.
Attention!
The kit does not include Raspberry Pi Pico. They must be purchased separately.
Pinout
Features
- Compatible with Raspberry Pi Pico
- 863 to 870 MHz frequency band
- Maximum transmission power 14 dBm
- SPI interface
- LiPo charging circuit
- Output voltage: 3.3V
- Current consumption: 45 mA (transmit), 5.3 mA (receive)
- Dimensions: 52 x 21 mm
Kit contains
- Pico-LoRa-SX1262-868M module
- 3.7V 600mAh Li-Po battery
- 2 dB 868 MHz antenna
- IPEX to SMA adapter
587715
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 601
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
zł40.65
24h
Available quantity: 2
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
zł28.49
24h
Available quantity: 4
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 48
Available
Other products in the same category (16)
WiFi module with ESP8266 and 1.14" display, designed to work with Raspberry Pi Pico. It communicates via UART interface using AT commands. SB Components 21888
zł75.50
24h
Available quantity: 2
Available
Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192
zł140.65
24h
Available quantity: 2
Available
Board with the NB-IoT SIM7020E module designed for the Raspberry Pi Pico. It communicates via the UART interface and AT commands. Waveshare Pico-SIM7020E-NB-IoT
zł75.01
24h
Available quantity: 2
Available
WiFi module with ESP8266 designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-ESP8266
zł41.62
24h
Available quantity: 5
Available
The expansion board with the LoRa E22-400T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 21642
zł262.49
24h
Available quantity: 1
Available
Module with 4 relays and optoisolation. Equipped with RP2040 chip and ESP8266 WiFi module. Can communicate via RS485 bus. SB Components 24124
zł439.00
24h
Available quantity: 3
Available
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare Pico-LoRa-SX1262-433M
zł64.86
24h
Available quantity: 8
Available
L76B based GNSS module that can work with GPS, BDS and QZSS systems. Communication via the UART interface. Waveshare Pico-GPS-L76B
zł69.88
24h
Available quantity: 3
Available
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. SB Components 21895
zł247.80
24h
Available quantity: 1
Available
The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628
zł264.19
24h
Available quantity: 1
Available
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. Waveshare Pico-SIM868-GSM/GPRS/GNSS
zł131.23
24h
Available quantity: 4
Available
2-channel converter for Raspberry Pi Pico that provides easy communication between UART TTL serial interface and RJ45 Ethernet. Waveshare Pico-ETH-CH9121
zł53.90
24h
Available quantity: 8
Available
The module with the UART-RS485 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3485 chip and enables data transmission between the UART interface and the RS485 device. Waveshare Pico-2CH-RS485
zł23.37
24h
Available quantity: 3
Available
Ethernet network module with W5100S chip dedicated to Raspberry Pi Pico. It communicates via the SPI interface and works with 3.3 V and 5 V systems. WIZnet-Ethernet-HAT
zł29.24
24h
Available quantity: 23
Available
Module with PMSA003 air quality sensor and BME280 pressure sensor designed for Raspberry Pi Pico. It is equipped with WiFi ESP8266 communication. SB Components 22342
zł284.79
24h
Available quantity: 2
Available
The module with the UART-RS232 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3232EEN chip and enables data transmission between the UART interface and the RS232 device. Waveshare Pico-2CH-RS232
zł24.28
24h
Available quantity: 6
Available
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M