PiCowbell DVI Output - module with mini HDMI connector for Raspberry Pi Pico
ID: 1185638
5906623431717
zł33.12
Tax included
zł26.93 tax excl.
Mini HDMI module for Raspberry Pi Pico. It allows you to send a video signal, e.g. to a monitor or TV. It is equipped with a STEMMA QT connector. Adafruit 5745
Description
Module with a mini HDMI connector dedicated to the Raspberry Pi Pico. It allows you to display images and graphics from the microcontroller directly to an HDMI monitor or TV. It does not support audio streaming. The board has a reset button and a STEMMA QT connector for easy connection of additional sensors. In addition, the I2C pins of the HDMI connector are connected to the I2C interface, which allows you to read the EDID EEPROM of the displays. User also has available CEC, Utility and HotPlug pads. Full documentation is available on the product page.
Features
- Mini-HDMI connector
- STEMMA QT/Qwiic connector
- Utility, CEC and HotPlug pins
- reset button
- Slide switch
- Dimensions: 52.5 x 20.2 x 4.9mm
Kit contains
- PiCowbell DVI Output Module
- 2 x 20-pin male goldpin connector
1185638
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.30
24h
Available quantity: 2299
Available
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
zł27.90
24h
Available quantity: 5
Available
Other products in the same category (16)
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M
zł64.67
4 weeks
No product available!
2-channel converter for Raspberry Pi Pico that provides easy communication between UART TTL serial interface and RJ45 Ethernet. Waveshare Pico-ETH-CH9121
zł53.90
24h
Available quantity: 1
Available
WiFi module with ESP8266 and 1.14" display, designed to work with Raspberry Pi Pico. It communicates via UART interface using AT commands. SB Components 21888
zł75.50
24h
Available quantity: 2
Available
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. SB Components 21895
zł247.80
24h
Available quantity: 1
Available
The expansion board with the LoRa E22-400T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 21642
zł262.49
24h
Available quantity: 1
Available
The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628
zł258.87
24h
Available quantity: 1
Available
Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192
zł140.65
24h
Available quantity: 2
Available
Module with PMSA003 air quality sensor and BME280 pressure sensor designed for Raspberry Pi Pico. It is equipped with WiFi ESP8266 communication. SB Components 22342
zł284.79
24h
Available quantity: 2
Available
Ethernet network module with W5100S chip dedicated to Raspberry Pi Pico. It communicates via the SPI interface and works with 3.3 V and 5 V systems. WIZnet-Ethernet-HAT
zł28.06
24h
Available quantity: 22
Available
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare Pico-LoRa-SX1262-433M
zł64.03
24h
Available quantity: 8
Available
Module with 4 relays and optoisolation. Equipped with RP2040 chip and ESP8266 WiFi module. Can communicate via RS485 bus. SB Components 24124
zł439.00
24h
Available quantity: 3
Available
Expansion module designed for Raspberry Pi Pico boards. Allows you to add CAN bus based communication to your project. Waveshare Pico-CAN-B
zł48.34
24h
Available quantity: 5
Available
Extension module designed for Raspberry Pi Pico boards. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5728
zł69.15
24h
Available quantity: 4
Available
Mini HDMI module for Raspberry Pi Pico. It allows you to send a video signal, e.g. to a monitor or TV. It is equipped with a STEMMA QT connector. Adafruit 5745
zł33.12
24h
Available quantity: 2
Available
Expansion module for Raspberry Pi Pico enabling serial communication in RS-485 and RS-232 standards using UART TX/RX without additional control lines, equipped with 3.81 mm screw terminals, automatic RS-485 direction control, LED indicators and ESD protection, powered by 3.3 V and 5 V. Kamami Labs KAmodRPi Pico RS485/RS232
zł26.00
24h
Available quantity: 245
Available
A communication module based on the Raspberry Pi RP2040 microcontroller, designed for data transmission in the 868 MHz band. It supports point-to-point LoRa and LoRaWAN operation, offering long range and low power consumption. The board is equipped with six Crowtail interfaces, an integrated battery charging circuit, and the ability to be powered by a solar panel. Compatibility with the Arduino IDE and MicroPython makes it an ideal platform for building IoT nodes, weather stations, and environmental monitoring systems. Elecrow RA-08H LoRaWan Node
zł59.41
24h
Available quantity: 4
Available
Mini HDMI module for Raspberry Pi Pico. It allows you to send a video signal, e.g. to a monitor or TV. It is equipped with a STEMMA QT connector. Adafruit 5745