New products
New products New products
zł9,349.00
4 weeks
zł173.58
Delivery date unknown
LoRa-E5 mini - development board with LoRa-E5 (STM32WLE5JC)
ID: 584479
5906623488094
zł111.91
Tax included
zł90.98 tax excl.
IoT development board with STM32WLE5JC chip that connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. It has all the pins of the LoRa-E5 module and an external antenna. Seeed Studio 113990939
Description
The development board with LoRa-E5 is an energy-saving, compact and efficient LoRaWAN module designed by Seeed Technology Co., Ltd. It features STMicroelectronics' STM32WLE5JE chip, which is the world's first integrated SoC to combine LoRa RF and MCU chip. The LoRa SX126X module is embedded in a very low power consumption microcontroller with ARM Cortex M4 core. It supports (G) FSK and LoRa mode in the 62.5kHz, 125kHz, 250kHz and 500kHz band, making it suitable for the design of IoT devices supporting EU868 and US915. On the board, there is an SMA connector (antenna included), an IPEX MHF connector, LEDs indicating operation and a connector with all pins of the LoRa-E5 module. It is powered by a USB type C connector or dedicated power pins (voltage range from 3.7 to 5 V).
The LoRa E5 module is designed in accordance with industry standards, therefore it is suitable for the design of industrial IoT products with a wide operating temperature range from -40 ℃ to 85 ℃. Has FCC and CE certificates. Full board documentation and examples of use are available on the product Wiki page.
Pinout
Features
- Wireless connectivity: built-in LoRaWAN® protocol, AT command, support for LoRaWAN® global frequency plan
- Worldwide Compatibility (Wide Frequency Range): EU868 / US915 / AU915 / AS923 / KR920 / IN865
- 158 dB amplification allows you to work with a long range
- High performance: TXOP = 22 dBm at 868/915 MHz
- Sensitivity: 136.5 dBm for SF12 with 125 KHz BW
- FCC and CE certification
- Connector with GPIO, ADC, SPI, I2C and UART interfaces
- LED indicators for operation
- External antenna and IPEX MHF connector
- Low energy consumption: only 2.1uA sleep current (WOR mode)
- Dimensions: 42 x 61 mm
Kit contains
- LoRa-E5 mini module
- USB type C cable
- SMA antenna
584479
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 1027
Available
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. Designed for surface mounting. Seeed Studio 317990687
zł39.61
24h
Available quantity: 8
Available
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091
zł94.33
24h
Available quantity: 4
Available
IoT development kit with STM32WLE5JC chip that connects microcontroller with ARM Cortex-M4 core and LoRa SX126X module. It has all the pins of the LoRa-E5 module, I2C, SPI, UART, RS485 interfaces and an external antenna. Seeed Studio 113990934
zł142.90
24h
Available quantity: 7
Available
Other products in the same category (16)
LoRa radio module with 433 MHz operating frequency. Communication takes place via the SPI serial interface. It is supplied with the voltage of 3.3 V
zł14.69
24h
Available quantity: 15
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
zł68.25
24h
Available quantity: 3
Available
A LoRa transceiver with an nRF52840 processor and an SX1262 radio, offering stable field communication and full Meshtastic and MeshCore compatibility. The device is equipped with a GPS module supporting GPS, GLONASS, BeiDou, and QZSS, and a clear 1.54" EPD display, ideal for operation in direct sunlight. A 1200 mAh battery provides over 48 hours of operation, and an external RP-SMA antenna allows for greater range and better signal quality. Elecrow ThinkNode M1 Walkie-Talkie
zł282.90
Delivery date unknown
No product available!
The expansion board with the LoRa E22-900T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and enables communication in the 868 MHz frequency band. SB Components 21628
zł258.87
24h
Available quantity: 1
Available
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. Adafruit 3179
zł195.77
24h
Available quantity: 2
Available
The LoRaWAN SX1302 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1302 868M LoRaWAN Gateway (B)
zł545.16
4 weeks
No product available!
LoRa RF transceiver module operating in the ISM band below 1GHz, featuring a UART interface and built-in antenna, used for long-range wireless data transmission. REYAX RYLR998
zł112.79
4 weeks
No product available!
Wio-WM1302 LoRaWAN Gateway Module (SPI) US915-M Seeed Studio 114992969 is a mini-PCIe format module based on the SX1302 chip, designed for building LoRaWAN gateways in the US915 band. Thanks to its low power consumption, high sensitivity, and SPI interface, it is well suited for IoT and M2M applications requiring reliable long-range communication.
zł124.86
4 weeks
No product available!
The HLK-L06 module is a compact 433 MHz LoRa solution for wireless data transmission in IoT applications. modHK-L06
zł23.90
24h
Available quantity: 2
Available
Compact and energy-efficient solution combining Bluetooth 5.0 and LoRa (862–930 MHz), ideal for IoT projects requiring long range and low power consumption. It uses the XIAO nRF52840 MCU with Cortex-M4 core and support for multiple interfaces and the LoRa SX1262 module for reliable wireless communication. The kit is perfect for applications such as Meshtastic, asset tracking, sensor networks or educational projects. Seeed Studio 102010710
zł78.90
24h
Available quantity: 165
Available
A mobile LoRa transceiver compatible with Meshtastic and MeshCore, equipped with GPS supporting GPS, GLONASS, BeiDou, and QZSS. The device utilizes a powerful ESP32-S3 microcontroller and SX1262 transceiver, ensuring stable, long-range communication in the 868 MHz band. The 1.54" EPD screen allows for convenient data display with very low power consumption, and the 1200 mAh battery ensures long operation in the field. Elecrow ThinkNode M5 Walkie-Talkie
zł255.00
Delivery date unknown
No product available!
Radio module with 868 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0115
zł204.46
24h
Available quantity: 2
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
zł68.27
4 weeks
No product available!
Crowtail-LoRa RA-08H is an energy-efficient LoRaWAN communication module with the ASR6601 chip, enabling data transmission up to 1 km in the 803–930 MHz band. Ideal for IoT projects, automation and remote monitoring systems requiring long battery-powered operation.
zł46.49
24h
Available quantity: 5
Available
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
zł479.63
4 weeks
No product available!
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT
zł497.40
24h
Available quantity: 1
Available
IoT development board with STM32WLE5JC chip that connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. It has all the pins of the LoRa-E5 module and an external antenna. Seeed Studio 113990939